Hello Lee,
On 06/16/2014 10:44 AM, Lee Jones wrote:
>> The MAX77802 PMIC has two 32.768kHz Buffered Clock Outputs with
>> Low Jitter Mode. This patch adds support for these two clocks.
>>
>> Signed-off-by: Javier Martinez Canillas <javier.marti...@collabora.co.uk>
>> ---
>> .../devicetree/bindings/clock/maxim,max77802.txt | 40 ++++
>> drivers/clk/Kconfig | 6 +
>> drivers/clk/Makefile | 1 +
>> drivers/clk/clk-max77802.c | 253
>> +++++++++++++++++++++
>> drivers/mfd/max77802.c | 3 +
>> include/dt-bindings/clock/maxim,max77802.h | 22 ++
>> 6 files changed, 325 insertions(+)
>> create mode 100644
>> Documentation/devicetree/bindings/clock/maxim,max77802.txt
>> create mode 100644 drivers/clk/clk-max77802.c
>> create mode 100644 include/dt-bindings/clock/maxim,max77802.h
>
> [...]
>
>> diff --git a/drivers/mfd/max77802.c b/drivers/mfd/max77802.c
>> index 59696dd..33e8023 100644
>> --- a/drivers/mfd/max77802.c
>> +++ b/drivers/mfd/max77802.c
>> @@ -35,6 +35,9 @@
>>
>> static const struct mfd_cell max77802_devs[] = {
>> { .name = "max77802-pmic", },
>> +#if defined(CONFIG_COMMON_CLK_MAX77802)
>
> No, don't do that. If COMMON_CLK_MAX77802 is not defined it just
> won't be matched, which is enough to ensure it won't be probed.
>
Thanks a lot for the explanation.
I'll send a v2 patch-set soon which has changes based on the feedback from Mark
and Krzysztof. I'll take this point into account as well.
>> + { .name = "max77802-clk", },
>> +#endif
>> };
>
> [...]
>
Best regards,
Javier
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
