On Mon, 16 Jun 2014, Doug Anderson wrote:
> From: Bill Richardson <wfric...@chromium.org>
>
> The members of struct cros_ec_device were improperly commented, and
> intermixed the private and public sections. This is just cleanup to make it
> more obvious what goes with what.
>
> [dianders: left lock in the structure but gave it the name that will
> eventually be used.]
>
> Signed-off-by: Bill Richardson <wfric...@chromium.org>
> Signed-off-by: Doug Anderson <diand...@chromium.org>
> ---
> drivers/mfd/cros_ec.c | 2 +-
> drivers/mfd/cros_ec_i2c.c | 4 +--
> drivers/mfd/cros_ec_spi.c | 10 +++----
> include/linux/mfd/cros_ec.h | 65
> ++++++++++++++++++++++++---------------------
> 4 files changed, 43 insertions(+), 38 deletions(-)
For the re-spin:
Acked-by: Lee Jones <lee.jo...@linaro.org>
> diff --git a/drivers/mfd/cros_ec.c b/drivers/mfd/cros_ec.c
> index bd6f936..a9eede5 100644
> --- a/drivers/mfd/cros_ec.c
> +++ b/drivers/mfd/cros_ec.c
> @@ -57,7 +57,7 @@ static int cros_ec_command_sendrecv(struct cros_ec_device
> *ec_dev,
> msg.in_buf = in_buf;
> msg.in_len = in_len;
>
> - return ec_dev->command_xfer(ec_dev, &msg);
> + return ec_dev->cmd_xfer(ec_dev, &msg);
> }
>
> static int cros_ec_command_recv(struct cros_ec_device *ec_dev,
> diff --git a/drivers/mfd/cros_ec_i2c.c b/drivers/mfd/cros_ec_i2c.c
> index 4f71be9..777e529 100644
> --- a/drivers/mfd/cros_ec_i2c.c
> +++ b/drivers/mfd/cros_ec_i2c.c
> @@ -29,7 +29,7 @@ static inline struct cros_ec_device *to_ec_dev(struct
> device *dev)
> return i2c_get_clientdata(client);
> }
>
> -static int cros_ec_command_xfer(struct cros_ec_device *ec_dev,
> +static int cros_ec_cmd_xfer_i2c(struct cros_ec_device *ec_dev,
> struct cros_ec_msg *msg)
> {
> struct i2c_client *client = ec_dev->priv;
> @@ -136,7 +136,7 @@ static int cros_ec_i2c_probe(struct i2c_client *client,
> ec_dev->dev = dev;
> ec_dev->priv = client;
> ec_dev->irq = client->irq;
> - ec_dev->command_xfer = cros_ec_command_xfer;
> + ec_dev->cmd_xfer = cros_ec_cmd_xfer_i2c;
> ec_dev->ec_name = client->name;
> ec_dev->phys_name = client->adapter->name;
> ec_dev->parent = &client->dev;
> diff --git a/drivers/mfd/cros_ec_spi.c b/drivers/mfd/cros_ec_spi.c
> index 0b8d328..52d4d7b 100644
> --- a/drivers/mfd/cros_ec_spi.c
> +++ b/drivers/mfd/cros_ec_spi.c
> @@ -73,7 +73,7 @@
> * if no record
> * @end_of_msg_delay: used to set the delay_usecs on the spi_transfer that
> * is sent when we want to turn off CS at the end of a transaction.
> - * @lock: mutex to ensure only one user of cros_ec_command_spi_xfer at a time
> + * @lock: mutex to ensure only one user of cros_ec_cmd_xfer_spi at a time
> */
> struct cros_ec_spi {
> struct spi_device *spi;
> @@ -210,13 +210,13 @@ static int cros_ec_spi_receive_response(struct
> cros_ec_device *ec_dev,
> }
>
> /**
> - * cros_ec_command_spi_xfer - Transfer a message over SPI and receive the
> reply
> + * cros_ec_cmd_xfer_spi - Transfer a message over SPI and receive the reply
> *
> * @ec_dev: ChromeOS EC device
> * @ec_msg: Message to transfer
> */
> -static int cros_ec_command_spi_xfer(struct cros_ec_device *ec_dev,
> - struct cros_ec_msg *ec_msg)
> +static int cros_ec_cmd_xfer_spi(struct cros_ec_device *ec_dev,
> + struct cros_ec_msg *ec_msg)
> {
> struct cros_ec_spi *ec_spi = ec_dev->priv;
> struct spi_transfer trans;
> @@ -372,7 +372,7 @@ static int cros_ec_spi_probe(struct spi_device *spi)
> ec_dev->dev = dev;
> ec_dev->priv = ec_spi;
> ec_dev->irq = spi->irq;
> - ec_dev->command_xfer = cros_ec_command_spi_xfer;
> + ec_dev->cmd_xfer = cros_ec_cmd_xfer_spi;
> ec_dev->ec_name = ec_spi->spi->modalias;
> ec_dev->phys_name = dev_name(&ec_spi->spi->dev);
> ec_dev->parent = &ec_spi->spi->dev;
> diff --git a/include/linux/mfd/cros_ec.h b/include/linux/mfd/cros_ec.h
> index 2ee3190..79a3585 100644
> --- a/include/linux/mfd/cros_ec.h
> +++ b/include/linux/mfd/cros_ec.h
> @@ -16,7 +16,9 @@
> #ifndef __LINUX_MFD_CROS_EC_H
> #define __LINUX_MFD_CROS_EC_H
>
> +#include <linux/notifier.h>
> #include <linux/mfd/cros_ec_commands.h>
> +#include <linux/mutex.h>
>
> /*
> * Command interface between EC and AP, for LPC, I2C and SPI interfaces.
> @@ -55,34 +57,53 @@ struct cros_ec_msg {
> /**
> * struct cros_ec_device - Information about a ChromeOS EC device
> *
> + * @ec_name: name of EC device (e.g. 'chromeos-ec')
> + * @phys_name: name of physical comms layer (e.g. 'i2c-4')
> + * @dev: Device pointer
> + * @was_wake_device: true if this device was set to wake the system from
> + * sleep at the last suspend
> + * @event_notifier: interrupt event notifier for transport devices
> + * @command_send: send a command
> + * @command_recv: receive a response
> + * @command_sendrecv: send a command and receive a response
> + *
> * @name: Name of this EC interface
> * @priv: Private data
> * @irq: Interrupt to use
> - * @din: input buffer (from EC)
> - * @dout: output buffer (to EC)
> + * @din: input buffer (for data from EC)
> + * @dout: output buffer (for data to EC)
> * \note
> * These two buffers will always be dword-aligned and include enough
> * space for up to 7 word-alignment bytes also, so we can ensure that
> * the body of the message is always dword-aligned (64-bit).
> - *
> * We use this alignment to keep ARM and x86 happy. Probably word
> * alignment would be OK, there might be a small performance advantage
> * to using dword.
> * @din_size: size of din buffer to allocate (zero to use static din)
> * @dout_size: size of dout buffer to allocate (zero to use static dout)
> - * @command_send: send a command
> - * @command_recv: receive a command
> - * @ec_name: name of EC device (e.g. 'chromeos-ec')
> - * @phys_name: name of physical comms layer (e.g. 'i2c-4')
> * @parent: pointer to parent device (e.g. i2c or spi device)
> - * @dev: Device pointer
> - * dev_lock: Lock to prevent concurrent access
> * @wake_enabled: true if this device can wake the system from sleep
> - * @was_wake_device: true if this device was set to wake the system from
> - * sleep at the last suspend
> - * @event_notifier: interrupt event notifier for transport devices
> + * @lock: one transaction at a time
> + * @cmd_xfer: low-level channel to the EC
> */
> struct cros_ec_device {
> +
> + /* These are used by other drivers that want to talk to the EC */
> + const char *ec_name;
> + const char *phys_name;
> + struct device *dev;
> + bool was_wake_device;
> + struct class *cros_class;
> + struct blocking_notifier_head event_notifier;
> + int (*command_send)(struct cros_ec_device *ec,
> + uint16_t cmd, void *out_buf, int out_len);
> + int (*command_recv)(struct cros_ec_device *ec,
> + uint16_t cmd, void *in_buf, int in_len);
> + int (*command_sendrecv)(struct cros_ec_device *ec,
> + uint16_t cmd, void *out_buf, int out_len,
> + void *in_buf, int in_len);
> +
> + /* These are used to implement the platform-specific interface */
> const char *name;
> void *priv;
> int irq;
> @@ -90,26 +111,10 @@ struct cros_ec_device {
> uint8_t *dout;
> int din_size;
> int dout_size;
> - int (*command_send)(struct cros_ec_device *ec,
> - uint16_t cmd, void *out_buf, int out_len);
> - int (*command_recv)(struct cros_ec_device *ec,
> - uint16_t cmd, void *in_buf, int in_len);
> - int (*command_sendrecv)(struct cros_ec_device *ec,
> - uint16_t cmd, void *out_buf, int out_len,
> - void *in_buf, int in_len);
> - int (*command_xfer)(struct cros_ec_device *ec,
> - struct cros_ec_msg *msg);
> -
> - const char *ec_name;
> - const char *phys_name;
> struct device *parent;
> -
> - /* These are --private-- fields - do not assign */
> - struct device *dev;
> - struct mutex dev_lock;
> bool wake_enabled;
> - bool was_wake_device;
> - struct blocking_notifier_head event_notifier;
> + struct mutex lock;
> + int (*cmd_xfer)(struct cros_ec_device *ec, struct cros_ec_msg *msg);
> };
>
> /**
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
