On 06/20/2014 09:24 AM, Tomasz Figa wrote:
> On 20.06.2014 02:22, Chanwoo Choi wrote:
>> Hi Tomasz,
>>
>> On 06/18/2014 04:58 PM, Tomasz Figa wrote:
>>> Hi Chanwoo,
>>>
>>> On 18.06.2014 04:20, Chanwoo Choi wrote:
>>>> This patch control special clock for ADC in Exynos series's FSYS block.
>>>> If special clock of ADC is registerd on clock list of common clk framework,
>>>> Exynos ADC drvier have to control this clock.
>>>>
>>>> Exynos3250/Exynos4/Exynos5 has 'adc' clock as following:
>>>> - 'adc' clock: bus clock for ADC
>>>>
>>>> Exynos3250 has additional 'sclk_adc' clock as following:
>>>> - 'sclk_adc' clock: special clock for ADC which provide clock to internal
>>>> ADC
>>>>
>>>> Exynos 4210/4212/4412 and Exynos5250/5420 has not included 'sclk_adc' clock
>>>> in FSYS_BLK. But, Exynos3250 based on Cortex-A7 has only included
>>>> 'sclk_adc'
>>>> clock in FSYS_BLK.
>>>>
>>>> Signed-off-by: Chanwoo Choi <cw00.c...@samsung.com>
>>>> Acked-by: Kyungmin Park <kyungmin.p...@samsung.com>
>>>> ---
>>>> drivers/iio/adc/exynos_adc.c | 93
>>>> ++++++++++++++++++++++++++++++++++++++------
>>>> 1 file changed, 81 insertions(+), 12 deletions(-)
>>>>
>>>> diff --git a/drivers/iio/adc/exynos_adc.c b/drivers/iio/adc/exynos_adc.c
>>>> index c30def6..6b026ac 100644
>>>> --- a/drivers/iio/adc/exynos_adc.c
>>>> +++ b/drivers/iio/adc/exynos_adc.c
>>>> @@ -41,7 +41,8 @@
>>>>
>>>> enum adc_version {
>>>> ADC_V1,
>>>> - ADC_V2
>>>> + ADC_V2,
>>>> + ADC_V2_EXYNOS3250,
>>>> };
>>>>
>>>> /* EXYNOS4412/5250 ADC_V1 registers definitions */
>>>> @@ -85,9 +86,11 @@ enum adc_version {
>>>> #define EXYNOS_ADC_TIMEOUT (msecs_to_jiffies(100))
>>>>
>>>> struct exynos_adc {
>>>> + struct device *dev;
>>>> void __iomem *regs;
>>>> void __iomem *enable_reg;
>>>> struct clk *clk;
>>>> + struct clk *sclk;
>>>> unsigned int irq;
>>>> struct regulator *vdd;
>>>> struct exynos_adc_ops *ops;
>>>> @@ -96,6 +99,7 @@ struct exynos_adc {
>>>>
>>>> u32 value;
>>>> unsigned int version;
>>>> + bool needs_sclk;
>>>
>>> This should be rather a part of the variant struct. See my comments to
>>> patch 1/4.
>>
>> OK, I'll include 'needs_sclk' in "variant" structure.
>>
>>>
>>>> };
>>>>
>>>> struct exynos_adc_ops {
>>>> @@ -103,11 +107,21 @@ struct exynos_adc_ops {
>>>> void (*clear_irq)(struct exynos_adc *info);
>>>> void (*start_conv)(struct exynos_adc *info, unsigned long addr);
>>>> void (*stop_conv)(struct exynos_adc *info);
>>>> + void (*disable_clk)(struct exynos_adc *info);
>>>> + int (*enable_clk)(struct exynos_adc *info);
>>>> };
>>>>
>>>> static const struct of_device_id exynos_adc_match[] = {
>>>> - { .compatible = "samsung,exynos-adc-v1", .data = (void *)ADC_V1 },
>>>> - { .compatible = "samsung,exynos-adc-v2", .data = (void *)ADC_V2 },
>>>> + {
>>>> + .compatible = "samsung,exynos-adc-v1",
>>>> + .data = (void *)ADC_V1,
>>>> + }, {
>>>> + .compatible = "samsung,exynos-adc-v2",
>>>> + .data = (void *)ADC_V2,
>>>> + }, {
>>>> + .compatible = "samsung,exynos3250-adc-v2",
>>>> + .data = (void *)ADC_V2_EXYNOS3250,
>>>> + },
>>>> {},
>>>> };
>>>> MODULE_DEVICE_TABLE(of, exynos_adc_match);
>>>> @@ -156,11 +170,42 @@ static void exynos_adc_v1_stop_conv(struct
>>>> exynos_adc *info)
>>>> writel(con, ADC_V1_CON(info->regs));
>>>> }
>>>>
>>>> +static void exynos_adc_disable_clk(struct exynos_adc *info)
>>>> +{
>>>> + if (info->needs_sclk)
>>>> + clk_disable_unprepare(info->sclk);
>>>> + clk_disable_unprepare(info->clk);
>>>> +}
>>>> +
>>>> +static int exynos_adc_enable_clk(struct exynos_adc *info)
>>>> +{
>>>> + int ret;
>>>> +
>>>> + ret = clk_prepare_enable(info->clk);
>>>> + if (ret) {
>>>> + dev_err(info->dev, "failed enabling adc clock: %d\n", ret);
>>>> + return ret;
>>>> + }
>>>> +
>>>> + if (info->needs_sclk) {
>>>> + ret = clk_prepare_enable(info->sclk);
>>>> + if (ret) {
>>>> + clk_disable_unprepare(info->clk);
>>>> + dev_err(info->dev,
>>>> + "failed enabling sclk_tsadc clock: %d\n", ret);
>>>> + }
>>>> + }
>>>> +
>>>> + return 0;
>>>> +}
>>>> +
>>>> static struct exynos_adc_ops exynos_adc_v1_ops = {
>>>> .init_hw = exynos_adc_v1_init_hw,
>>>> .clear_irq = exynos_adc_v1_clear_irq,
>>>> .start_conv = exynos_adc_v1_start_conv,
>>>> .stop_conv = exynos_adc_v1_stop_conv,
>>>> + .disable_clk = exynos_adc_disable_clk,
>>>> + .enable_clk = exynos_adc_enable_clk,
>>>> };
>>>>
>>>> static void exynos_adc_v2_init_hw(struct exynos_adc *info)
>>>> @@ -210,6 +255,8 @@ static struct exynos_adc_ops exynos_adc_v2_ops = {
>>>> .start_conv = exynos_adc_v2_start_conv,
>>>> .clear_irq = exynos_adc_v2_clear_irq,
>>>> .stop_conv = exynos_adc_v2_stop_conv,
>>>> + .disable_clk = exynos_adc_disable_clk,
>>>> + .enable_clk = exynos_adc_enable_clk,
>>>
>>> Based on the fact that all variants use the same function, I don't think
>>> there is a reason to add .{disable,enable}_clk in the ops struct. If
>>> they diverge in future, they could be added later, but right now it
>>> doesn't have any value.
>>
>> OK, I'll not add .{disable,enable}_clk and then just use following functions
>> for clock control:
>> - exynos_adc_prepare_clk() : once execute this function in _probe()
>> - exynos_adc_unprepare_clk() : once execute this function in _remove()
>> - exynos_adc_enable_clk()
>> - exynos_adc_disable_clk()
>
> Is there any need to separate prepare/unprepare from enable/disable?
> Otherwise sounds good, thanks.
Naveen Krishna Chatradhi want to execute once prepare/unpreare in probe/remove
function.
- Following comment of Naveen Krishna Chatradhi
> +static void exynos_adc_disable_clk(struct exynos_adc *info)
> +{
> + if (info->needs_sclk)
> + clk_disable_unprepare(info->sclk);
> + clk_disable_unprepare(info->clk);
(Just a nit pick) As a part of cleanup can we also change to use
clk_disable() here and clk_unprepare() once and for all at the end.
> +}
> +
> +static int exynos_adc_enable_clk(struct exynos_adc *info)
> +{
> + int ret;
> +
> + ret = clk_prepare_enable(info->clk);
> + if (ret) {
> + dev_err(info->dev, "failed enabling adc clock: %d\n", ret);
> + return ret;
> + }
> +
> + if (info->needs_sclk) {
> + ret = clk_prepare_enable(info->sclk);
Can we use clk_enable() here and clk_prepare() some where during the probe.
Best Regards,
Chanwoo Choi
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
