This series is based on Heikki's patches for simpliefied phy lookup table: [PATCHv2 0/6] phy: simplified phy lookup [1], applied against 'next' branch of Kishon's linux-phy tree.
Changes since v1: 1) Using 'gen_phy' member of 'hcd' instead of declaring more variables to hold phys. 2) Added a check for compatible match for 'Synopsys-dwc3' controller, since the 'gen_phy' member of 'hcd' already gets the 'usb' PHY in core/hcd.c; but XHCI on Synopsys-dwc3 doesn't need that, instead two separate PHYs for UTMI+ and PIPE3 for the two HCDs (main hcd and shared hcd). 3) Restructured the code in 'xhci_plat_setup()' and 'xhci_plat_resume()' to use hcd->gen_phy directly. Also added the check for Synopsys's DWC3 controller while trying to calibrate the PHY. Explanation for the need of this patch-series: "The DWC3-exynos eXtensible host controller present on Exynos5420/5800 SoCs is quirky. The PHY serving this controller operates at High-Speed by default, so it detects even Super-speed devices as high-speed ones. Certain PHY parameters like Tx LOS levels and Boost levels need to be calibrated further post initialization of xHCI controller, to get SuperSpeed operations working." [1] https://lkml.org/lkml/2014/6/5/358 Vivek Gautam (4): phy: Add provision for calibrating phy. usb: host: xhci-plat: Get PHYs for xhci's hcds usb: host: xhci-plat: Caibrate PHY post host reset phy: exynos5-usbdrd: Calibrate LOS levels for exynos5420/5800 drivers/phy/phy-core.c | 36 ++++++++ drivers/phy/phy-exynos5-usbdrd.c | 169 ++++++++++++++++++++++++++++++++++++++ drivers/usb/host/xhci-plat.c | 75 ++++++++++++++++- include/linux/phy/phy.h | 8 ++ 4 files changed, 286 insertions(+), 2 deletions(-) -- 1.7.10.4 -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
