From: Naveen Krishna Chatradhi <ch.nav...@samsung.com>

Samsung SPI driver now uses the generic SPI "cs-gpios"
binding so update the documentation accordingly.

Signed-off-by: Naveen Krishna Chatradhi <ch.nav...@samsung.com>
[javier.marti...@collabora.co.uk: split changes and improve commit message]
Signed-off-by: Javier Martinez Canillas <javier.marti...@collabora.co.uk>
Reviewed-by: Tomasz Figa <t.f...@samsung.com>
---
 Documentation/devicetree/bindings/spi/spi-samsung.txt | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/spi/spi-samsung.txt 
b/Documentation/devicetree/bindings/spi/spi-samsung.txt
index 7f2d88d..1e8a857 100644
--- a/Documentation/devicetree/bindings/spi/spi-samsung.txt
+++ b/Documentation/devicetree/bindings/spi/spi-samsung.txt
@@ -38,15 +38,13 @@ Optional Board Specific Properties:
 - num-cs: Specifies the number of chip select lines supported. If
   not specified, the default number of chip select lines is set to 1.
 
+- cs-gpios: should specify GPIOs used for chipselects (see spi-bus.txt)
+
 SPI Controller specific data in SPI slave nodes:
 
 - The spi slave nodes should provide the following information which is 
required
   by the spi controller.
 
-  - cs-gpio: A gpio specifier that specifies the gpio line used as
-    the slave select line by the spi controller. The format of the gpio
-    specifier depends on the gpio controller.
-
   - samsung,spi-feedback-delay: The sampling phase shift to be applied on the
     miso line (to account for any lag in the miso line). The following are the
     valid values.
@@ -84,6 +82,7 @@ Example:
                #size-cells = <0>;
                pinctrl-names = "default";
                pinctrl-0 = <&spi0_bus>;
+               cs-gpios = <&gpa2 5 0>;
 
                w25q80bw@0 {
                        #address-cells = <1>;
@@ -93,7 +92,6 @@ Example:
                        spi-max-frequency = <10000>;
 
                        controller-data {
-                               cs-gpio = <&gpa2 5 1 0 3>;
                                samsung,spi-feedback-delay = <0>;
                        };
 
-- 
2.0.0.rc2

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to