On 08/26/2014 03:35 PM, Andrzej Hajda wrote:
> On 08/26/2014 07:57 AM, Joonyoung Shim wrote:
>> Hi Andrzej,
>>
>> On 08/22/2014 04:52 PM, Andrzej Hajda wrote:
>>> FIMC in default mode of operation uses only one input buffer,
>>> but the driver used also second buffer, as a result only the
>>> first frame was processed correctly. The patch fixes it.
>> I can't understand well, then we don't need to distinguish buf_id in
>> fimc_src_set_addr()?
> Yes. FIMC in default operation mode uses only one input buffer pointer
> which should
> be updated when processing of the previous buffer has been finished.
>
> There exists also ping-pong mode which uses two buffer pointers, as I
> have spotted in
> specs. However I have not seen it was implemented neither in drm,
> neither in camera drivers.
> I will try to implement it later.
OK if operation is no problem, and i think it's better to add comments
about this.
>
> Regards
> Andrzej
>
>>
>>> Signed-off-by: Andrzej Hajda <a.ha...@samsung.com>
>>> ---
>>> drivers/gpu/drm/exynos/exynos_drm_fimc.c | 16 ++++++++--------
>>> 1 file changed, 8 insertions(+), 8 deletions(-)
>>>
>>> diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimc.c
>>> b/drivers/gpu/drm/exynos/exynos_drm_fimc.c
>>> index b20078e..e985253 100644
>>> --- a/drivers/gpu/drm/exynos/exynos_drm_fimc.c
>>> +++ b/drivers/gpu/drm/exynos/exynos_drm_fimc.c
>>> @@ -720,24 +720,24 @@ static int fimc_src_set_addr(struct device *dev,
>>> case IPP_BUF_ENQUEUE:
>>> config = &property->config[EXYNOS_DRM_OPS_SRC];
>>> fimc_write(ctx, buf_info->base[EXYNOS_DRM_PLANAR_Y],
>>> - EXYNOS_CIIYSA(buf_id));
>>> + EXYNOS_CIIYSA0);
>>>
>>> if (config->fmt == DRM_FORMAT_YVU420) {
>>> fimc_write(ctx, buf_info->base[EXYNOS_DRM_PLANAR_CR],
>>> - EXYNOS_CIICBSA(buf_id));
>>> + EXYNOS_CIICBSA0);
>>> fimc_write(ctx, buf_info->base[EXYNOS_DRM_PLANAR_CB],
>>> - EXYNOS_CIICRSA(buf_id));
>>> + EXYNOS_CIICRSA0);
>>> } else {
>>> fimc_write(ctx, buf_info->base[EXYNOS_DRM_PLANAR_CB],
>>> - EXYNOS_CIICBSA(buf_id));
>>> + EXYNOS_CIICBSA0);
>>> fimc_write(ctx, buf_info->base[EXYNOS_DRM_PLANAR_CR],
>>> - EXYNOS_CIICRSA(buf_id));
>>> + EXYNOS_CIICRSA0);
>>> }
>>> break;
>>> case IPP_BUF_DEQUEUE:
>>> - fimc_write(ctx, 0x0, EXYNOS_CIIYSA(buf_id));
>>> - fimc_write(ctx, 0x0, EXYNOS_CIICBSA(buf_id));
>>> - fimc_write(ctx, 0x0, EXYNOS_CIICRSA(buf_id));
>>> + fimc_write(ctx, 0x0, EXYNOS_CIIYSA0);
>>> + fimc_write(ctx, 0x0, EXYNOS_CIICBSA0);
>>> + fimc_write(ctx, 0x0, EXYNOS_CIICRSA0);
>>> break;
>>> default:
>>> /* bypass */
>>>
>>
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
