Dear Kukjin, Could you please review or pick this patchset?
Best Regards, Chanwoo Choi On 10/08/2014 11:11 AM, YoungJun Cho wrote: > From: Youngjun Cho <yj44....@samsung.com> > > This patch adds new board dts file to support Samsung Monk board which is > based on Exynos3250 SoC and has different H/W configuration from Rinato. > > This patch is based on linux-samsung.git for-next branch and depends on > [PATCHv2 0/2] ARM: dts: Add new board dts file for Exynos3250-based Rinato > board > > Changes from v1: > - The 'memory' entries coalesce into one entry > - Removes useless space > - Puts voltage-regulator-0 under the root node > > This dts file support following features: > - eMMC > - Main PMIC (Samsung S2MPS14) > - Interface PMIC (Maxim MAX77836, MUIC, fuel-gauge, charger) > - RTC of Exynos3250 > - ADC of Exynos3250 with NTC thermistor > - I2S of Exynos3250 > - TMU of Exynos3250 > - Secure firmware for Exynos3250 secondary cpu boot > - Serial ports of Exynos3250 > - gpio-key for power key > > Signed-off-by: Youngjun Cho <yj44....@samsung.com> > Signed-off-by: Chanwoo Choi <cw00.c...@samsung.com> > Signed-off-by: Inki Dae <inki....@samsung.com> > Signed-off-by: Seung-Woo Kim <sw0312....@samsung.com> > Signed-off-by: Jaehoon Chung <jh80.ch...@samsung.com> > Signed-off-by: Kyungmin Park <kyungmin.p...@samsung.com> > --- > arch/arm/boot/dts/Makefile | 3 +- > arch/arm/boot/dts/exynos3250-monk.dts | 583 > ++++++++++++++++++++++++++++++++++ > 2 files changed, 585 insertions(+), 1 deletion(-) > create mode 100644 arch/arm/boot/dts/exynos3250-monk.dts > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index 5728918..0c8ae64 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -64,7 +64,8 @@ dtb-$(CONFIG_ARCH_BRCMSTB) += \ > dtb-$(CONFIG_ARCH_DAVINCI) += da850-enbw-cmc.dtb \ > da850-evm.dtb > dtb-$(CONFIG_ARCH_EFM32) += efm32gg-dk3750.dtb > -dtb-$(CONFIG_ARCH_EXYNOS) += exynos3250-rinato.dtb \ > +dtb-$(CONFIG_ARCH_EXYNOS) += exynos3250-monk.dtb \ > + exynos3250-rinato.dtb \ > exynos4210-origen.dtb \ > exynos4210-smdkv310.dtb \ > exynos4210-trats.dtb \ > diff --git a/arch/arm/boot/dts/exynos3250-monk.dts > b/arch/arm/boot/dts/exynos3250-monk.dts > new file mode 100644 > index 0000000..615672f > --- /dev/null > +++ b/arch/arm/boot/dts/exynos3250-monk.dts > @@ -0,0 +1,583 @@ > +/* > + * Samsung's Exynos3250 based Monk board device tree source > + * > + * Copyright (c) 2014 Samsung Electronics Co., Ltd. > + * http://www.samsung.com > + * > + * Device tree source file for Samsung's Monk board which is based on > + * Samsung Exynos3250 SoC. > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + */ > + > +/dts-v1/; > +#include "exynos3250.dtsi" > +#include <dt-bindings/input/input.h> > + > +/ { > + model = "Samsung Monk board"; > + compatible = "samsung,monk", "samsung,exynos3250", "samsung,exynos3"; > + > + aliases { > + i2c7 = &i2c_max77836; > + }; > + > + memory { > + reg = <0x40000000 0x1ff00000>; > + }; > + > + chosen { > + bootargs = "console=ttySAC1,115200N8 root=/dev/mmcblk0p15 > rootwait earlyprintk panic=5"; > + }; > + > + firmware@0205F000 { > + compatible = "samsung,secure-firmware"; > + reg = <0x0205F000 0x1000>; > + }; > + > + gpio_keys { > + compatible = "gpio-keys"; > + > + power_key { > + interrupt-parent = <&gpx2>; > + interrupts = <7 0>; > + gpios = <&gpx2 7 1>; > + linux,code = <KEY_POWER>; > + label = "power key"; > + debounce-interval = <10>; > + gpio-key,wakeup; > + }; > + }; > + > + vemmc_reg: voltage-regulator-0 { > + compatible = "regulator-fixed"; > + regulator-name = "V_EMMC_2.8V-fixed"; > + regulator-min-microvolt = <2800000>; > + regulator-max-microvolt = <2800000>; > + gpio = <&gpk0 2 0>; > + enable-active-high; > + }; > + > + i2c_max77836: i2c-gpio-0 { > + compatible = "i2c-gpio"; > + gpios = <&gpd0 2 0>, <&gpd0 3 0>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + max77836: subpmic@25 { > + compatible = "maxim,max77836"; > + interrupt-parent = <&gpx1>; > + interrupts = <5 0>; > + reg = <0x25>; > + wakeup; > + > + muic: max77836-muic { > + compatible = "maxim,max77836-muic"; > + }; > + > + regulators { > + compatible = "maxim,max77836-regulator"; > + safeout_reg: SAFEOUT { > + regulator-name = "SAFEOUT"; > + }; > + > + charger_reg: CHARGER { > + regulator-name = "CHARGER"; > + regulator-min-microamp = <45000>; > + regulator-max-microamp = <475000>; > + regulator-boot-on; > + }; > + > + motor_reg: LDO1 { > + regulator-name = "MOT_2.7V"; > + regulator-min-microvolt = <1100000>; > + regulator-max-microvolt = <2700000>; > + }; > + > + LDO2 { > + regulator-name = "UNUSED_LDO2"; > + regulator-min-microvolt = <800000>; > + regulator-max-microvolt = <3950000>; > + }; > + }; > + > + charger { > + compatible = "maxim,max77836-charger"; > + > + maxim,constant-uvolt = <4350000>; > + maxim,fast-charge-uamp = <225000>; > + maxim,eoc-uamp = <7500>; > + maxim,ovp-uvolt = <6500000>; > + }; > + }; > + }; > +}; > + > +&adc { > + vdd-supply = <&ldo3_reg>; > + status = "okay"; > + assigned-clocks = <&cmu CLK_SCLK_TSADC>; > + assigned-clock-rates = <6000000>; > + > + thermistor-ap { > + compatible = "ntc,ncp15wb473"; > + pullup-uv = <1800000>; > + pullup-ohm = <100000>; > + pulldown-ohm = <100000>; > + io-channels = <&adc 0>; > + }; > + > + thermistor-battery { > + compatible = "ntc,ncp15wb473"; > + pullup-uv = <1800000>; > + pullup-ohm = <100000>; > + pulldown-ohm = <100000>; > + io-channels = <&adc 1>; > + }; > +}; > + > +&i2c_0 { > + #address-cells = <1>; > + #size-cells = <0>; > + samsung,i2c-sda-delay = <100>; > + samsung,i2c-slave-addr = <0x10>; > + samsung,i2c-max-bus-freq = <100000>; > + status = "okay"; > + > + s2mps14_pmic@66 { > + compatible = "samsung,s2mps14-pmic"; > + interrupt-parent = <&gpx0>; > + interrupts = <7 0>; > + reg = <0x66>; > + wakeup; > + > + s2mps14_osc: clocks { > + compatible = "samsung,s2mps14-clk"; > + #clock-cells = <1>; > + clock-output-names = "s2mps14_ap", "unused", > + "s2mps14_bt"; > + }; > + > + regulators { > + ldo1_reg: LDO1 { > + regulator-name = "VAP_ALIVE_1.0V"; > + regulator-min-microvolt = <1000000>; > + regulator-max-microvolt = <1000000>; > + regulator-always-on; > + }; > + > + ldo2_reg: LDO2 { > + regulator-name = "VAP_M1_1.2V"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-always-on; > + }; > + > + ldo3_reg: LDO3 { > + regulator-name = "VCC_AP_1.8V"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + }; > + > + ldo4_reg: LDO4 { > + regulator-name = "VAP_AVDD_PLL1"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + }; > + > + ldo5_reg: LDO5 { > + regulator-name = "VAP_PLL_ISO_1.0V"; > + regulator-min-microvolt = <1000000>; > + regulator-max-microvolt = <1000000>; > + regulator-always-on; > + }; > + > + ldo6_reg: LDO6 { > + regulator-name = "VAP_MIPI_1.0V"; > + regulator-min-microvolt = <1000000>; > + regulator-max-microvolt = <1000000>; > + }; > + > + ldo7_reg: LDO7 { > + regulator-name = "VAP_AVDD_1.8V"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + }; > + > + ldo8_reg: LDO8 { > + regulator-name = "VAP_USB_3.0V"; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3000000>; > + regulator-always-on; > + }; > + > + ldo9_reg: LDO9 { > + regulator-name = "V_LPDDR_1.2V"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-always-on; > + }; > + > + ldo10_reg: LDO10 { > + regulator-name = "UNUSED_LDO10"; > + regulator-min-microvolt = <1000000>; > + regulator-max-microvolt = <1000000>; > + }; > + > + ldo11_reg: LDO11 { > + regulator-name = "V_EMMC_1.8V"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + samsung,ext-control-gpios = <&gpk0 2 0>; > + }; > + > + ldo12_reg: LDO12 { > + regulator-name = "V_EMMC_2.8V"; > + regulator-min-microvolt = <2800000>; > + regulator-max-microvolt = <2800000>; > + samsung,ext-control-gpios = <&gpk0 2 0>; > + }; > + > + ldo13_reg: LDO13 { > + regulator-name = "VSENSOR_2.85V"; > + regulator-min-microvolt = <2850000>; > + regulator-max-microvolt = <2850000>; > + regulator-always-on; > + }; > + > + ldo14_reg: LDO14 { > + regulator-name = "UNUSED_LDO14"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + }; > + > + ldo15_reg: LDO15 { > + regulator-name = "TSP_AVDD_3.3V"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + }; > + > + ldo16_reg: LDO16 { > + regulator-name = "LCD_VDD_3.3V"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + }; > + > + ldo17_reg: LDO17 { > + regulator-name = "UNUSED_LDO17"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + }; > + > + ldo18_reg: LDO18 { > + regulator-name = "UNUSED_LDO18"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + }; > + > + ldo19_reg: LDO19 { > + regulator-name = "TSP_VDD_1.8V"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + }; > + > + ldo20_reg: LDO20 { > + regulator-name = "LCD_VDD_1.8V"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + }; > + > + ldo21_reg: LDO21 { > + regulator-name = "UNUSED_LDO21"; > + regulator-min-microvolt = <1000000>; > + regulator-max-microvolt = <1000000>; > + }; > + > + ldo22_reg: LDO22 { > + regulator-name = "UNUSED_LDO22"; > + regulator-min-microvolt = <1000000>; > + regulator-max-microvolt = <1000000>; > + }; > + > + ldo23_reg: LDO23 { > + regulator-name = "UNUSED_LDO23"; > + regulator-min-microvolt = <1000000>; > + regulator-max-microvolt = <1000000>; > + regulator-always-on; > + }; > + > + ldo24_reg: LDO24 { > + regulator-name = "UNUSED_LDO24"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + }; > + > + ldo25_reg: LDO25 { > + regulator-name = "UNUSED_LDO25"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + }; > + > + buck1_reg: BUCK1 { > + regulator-name = "VAP_MIF_1.0V"; > + regulator-min-microvolt = <800000>; > + regulator-max-microvolt = <900000>; > + regulator-always-on; > + }; > + > + buck2_reg: BUCK2 { > + regulator-name = "VAP_ARM_1.0V"; > + regulator-min-microvolt = <850000>; > + regulator-max-microvolt = <1150000>; > + regulator-always-on; > + }; > + > + buck3_reg: BUCK3 { > + regulator-name = "VAP_INT3D_1.0V"; > + regulator-min-microvolt = <850000>; > + regulator-max-microvolt = <1000000>; > + regulator-always-on; > + }; > + > + buck4_reg: BUCK4 { > + regulator-name = "VCC_SUB_1.95V"; > + regulator-min-microvolt = <1950000>; > + regulator-max-microvolt = <1950000>; > + regulator-always-on; > + }; > + > + buck5_reg: BUCK5 { > + regulator-name = "VCC_SUB_1.35V"; > + regulator-min-microvolt = <1350000>; > + regulator-max-microvolt = <1350000>; > + regulator-always-on; > + }; > + }; > + }; > +}; > + > +&i2c_1 { > + #address-cells = <1>; > + #size-cells = <0>; > + samsung,i2c-sda-delay = <100>; > + samsung,i2c-slave-addr = <0x10>; > + samsung,i2c-max-bus-freq = <400000>; > + status = "okay"; > + > + fuelgauge@36 { > + compatible = "maxim,max77836-battery"; > + interrupt-parent = <&gpx1>; > + interrupts = <2 8>; > + reg = <0x36>; > + }; > +}; > + > +&i2s2 { > + status = "okay"; > +}; > + > +&mshc_0 { > + #address-cells = <1>; > + #size-cells = <0>; > + num-slots = <1>; > + broken-cd; > + non-removable; > + cap-mmc-highspeed; > + desc-num = <4>; > + mmc-hs200-1_8v; > + card-detect-delay = <200>; > + vmmc-supply = <&vemmc_reg>; > + clock-frequency = <100000000>; > + clock-freq-min-max = <400000 100000000>; > + samsung,dw-mshc-ciu-div = <1>; > + samsung,dw-mshc-sdr-timing = <0 1>; > + samsung,dw-mshc-ddr-timing = <1 2>; > + pinctrl-names = "default"; > + pinctrl-0 = <&sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>; > + bus-width = <8>; > + status = "okay"; > +}; > + > +&serial_0 { > + assigned-clocks = <&cmu CLK_SCLK_UART0>; > + assigned-clock-rates = <100000000>; > + status = "okay"; > +}; > + > +&serial_1 { > + status = "okay"; > +}; > + > +&tmu { > + vtmu-supply = <&ldo7_reg>; > + status = "okay"; > +}; > + > +&rtc { > + clocks = <&cmu CLK_RTC>, <&s2mps14_osc 0>; > + clock-names = "rtc", "rtc_src"; > + status = "okay"; > +}; > + > +&xusbxti { > + clock-frequency = <24000000>; > +}; > + > +&pinctrl_0 { > + pinctrl-names = "default"; > + pinctrl-0 = <&sleep0>; > + > + sleep0: sleep-state { > + PIN_SLP(gpa0-0, INPUT, DOWN); > + PIN_SLP(gpa0-1, INPUT, DOWN); > + PIN_SLP(gpa0-2, INPUT, DOWN); > + PIN_SLP(gpa0-3, INPUT, DOWN); > + PIN_SLP(gpa0-4, INPUT, DOWN); > + PIN_SLP(gpa0-5, INPUT, DOWN); > + PIN_SLP(gpa0-6, INPUT, DOWN); > + PIN_SLP(gpa0-7, INPUT, DOWN); > + > + PIN_SLP(gpa1-0, INPUT, DOWN); > + PIN_SLP(gpa1-1, INPUT, DOWN); > + PIN_SLP(gpa1-2, INPUT, DOWN); > + PIN_SLP(gpa1-3, INPUT, DOWN); > + PIN_SLP(gpa1-4, INPUT, DOWN); > + PIN_SLP(gpa1-5, INPUT, DOWN); > + > + PIN_SLP(gpb-0, PREV, NONE); > + PIN_SLP(gpb-1, PREV, NONE); > + PIN_SLP(gpb-2, PREV, NONE); > + PIN_SLP(gpb-3, PREV, NONE); > + PIN_SLP(gpb-4, INPUT, DOWN); > + PIN_SLP(gpb-5, INPUT, DOWN); > + PIN_SLP(gpb-6, INPUT, DOWN); > + PIN_SLP(gpb-7, INPUT, DOWN); > + > + PIN_SLP(gpc0-0, INPUT, DOWN); > + PIN_SLP(gpc0-1, INPUT, DOWN); > + PIN_SLP(gpc0-2, INPUT, DOWN); > + PIN_SLP(gpc0-3, INPUT, DOWN); > + PIN_SLP(gpc0-4, INPUT, DOWN); > + > + PIN_SLP(gpc1-0, INPUT, DOWN); > + PIN_SLP(gpc1-1, INPUT, DOWN); > + PIN_SLP(gpc1-2, INPUT, DOWN); > + PIN_SLP(gpc1-3, INPUT, DOWN); > + PIN_SLP(gpc1-4, INPUT, DOWN); > + > + PIN_SLP(gpd0-0, INPUT, DOWN); > + PIN_SLP(gpd0-1, INPUT, DOWN); > + PIN_SLP(gpd0-2, INPUT, NONE); > + PIN_SLP(gpd0-3, INPUT, NONE); > + > + PIN_SLP(gpd1-0, INPUT, NONE); > + PIN_SLP(gpd1-1, INPUT, NONE); > + PIN_SLP(gpd1-2, INPUT, NONE); > + PIN_SLP(gpd1-3, INPUT, NONE); > + }; > +}; > + > +&pinctrl_1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&sleep1>; > + > + sleep1: sleep-state { > + PIN_SLP(gpe0-0, PREV, NONE); > + PIN_SLP(gpe0-1, PREV, NONE); > + PIN_SLP(gpe0-2, INPUT, DOWN); > + PIN_SLP(gpe0-3, INPUT, DOWN); > + PIN_SLP(gpe0-4, PREV, NONE); > + PIN_SLP(gpe0-5, INPUT, DOWN); > + PIN_SLP(gpe0-6, INPUT, DOWN); > + PIN_SLP(gpe0-7, INPUT, DOWN); > + > + PIN_SLP(gpe1-0, INPUT, DOWN); > + PIN_SLP(gpe1-1, PREV, NONE); > + PIN_SLP(gpe1-2, INPUT, DOWN); > + PIN_SLP(gpe1-3, INPUT, DOWN); > + PIN_SLP(gpe1-4, INPUT, DOWN); > + PIN_SLP(gpe1-5, INPUT, DOWN); > + PIN_SLP(gpe1-6, INPUT, DOWN); > + PIN_SLP(gpe1-7, INPUT, NONE); > + > + PIN_SLP(gpe2-0, INPUT, NONE); > + PIN_SLP(gpe2-1, INPUT, NONE); > + PIN_SLP(gpe2-2, INPUT, NONE); > + > + PIN_SLP(gpk0-0, INPUT, DOWN); > + PIN_SLP(gpk0-1, INPUT, DOWN); > + PIN_SLP(gpk0-2, OUT0, NONE); > + PIN_SLP(gpk0-3, INPUT, DOWN); > + PIN_SLP(gpk0-4, INPUT, DOWN); > + PIN_SLP(gpk0-5, INPUT, DOWN); > + PIN_SLP(gpk0-6, INPUT, DOWN); > + PIN_SLP(gpk0-7, INPUT, DOWN); > + > + PIN_SLP(gpk1-0, PREV, NONE); > + PIN_SLP(gpk1-1, PREV, NONE); > + PIN_SLP(gpk1-2, INPUT, DOWN); > + PIN_SLP(gpk1-3, PREV, NONE); > + PIN_SLP(gpk1-4, PREV, NONE); > + PIN_SLP(gpk1-5, PREV, NONE); > + PIN_SLP(gpk1-6, PREV, NONE); > + > + PIN_SLP(gpk2-0, INPUT, DOWN); > + PIN_SLP(gpk2-1, INPUT, DOWN); > + PIN_SLP(gpk2-2, INPUT, DOWN); > + PIN_SLP(gpk2-3, INPUT, DOWN); > + PIN_SLP(gpk2-4, INPUT, DOWN); > + PIN_SLP(gpk2-5, INPUT, DOWN); > + PIN_SLP(gpk2-6, INPUT, DOWN); > + > + PIN_SLP(gpl0-0, INPUT, DOWN); > + PIN_SLP(gpl0-1, INPUT, DOWN); > + PIN_SLP(gpl0-2, INPUT, DOWN); > + PIN_SLP(gpl0-3, INPUT, DOWN); > + > + PIN_SLP(gpm0-0, INPUT, DOWN); > + PIN_SLP(gpm0-1, INPUT, DOWN); > + PIN_SLP(gpm0-2, INPUT, DOWN); > + PIN_SLP(gpm0-3, INPUT, DOWN); > + PIN_SLP(gpm0-4, INPUT, DOWN); > + PIN_SLP(gpm0-5, INPUT, DOWN); > + PIN_SLP(gpm0-6, INPUT, DOWN); > + PIN_SLP(gpm0-7, INPUT, DOWN); > + > + PIN_SLP(gpm1-0, INPUT, DOWN); > + PIN_SLP(gpm1-1, INPUT, DOWN); > + PIN_SLP(gpm1-2, INPUT, DOWN); > + PIN_SLP(gpm1-3, INPUT, DOWN); > + PIN_SLP(gpm1-4, INPUT, DOWN); > + PIN_SLP(gpm1-5, INPUT, DOWN); > + PIN_SLP(gpm1-6, INPUT, DOWN); > + > + PIN_SLP(gpm2-0, INPUT, DOWN); > + PIN_SLP(gpm2-1, INPUT, DOWN); > + PIN_SLP(gpm2-2, INPUT, DOWN); > + PIN_SLP(gpm2-3, INPUT, DOWN); > + PIN_SLP(gpm2-4, INPUT, DOWN); > + > + PIN_SLP(gpm3-0, INPUT, DOWN); > + PIN_SLP(gpm3-1, INPUT, DOWN); > + PIN_SLP(gpm3-2, INPUT, DOWN); > + PIN_SLP(gpm3-3, INPUT, DOWN); > + PIN_SLP(gpm3-4, INPUT, DOWN); > + PIN_SLP(gpm3-5, INPUT, DOWN); > + PIN_SLP(gpm3-6, INPUT, DOWN); > + PIN_SLP(gpm3-7, INPUT, DOWN); > + > + PIN_SLP(gpm4-0, INPUT, DOWN); > + PIN_SLP(gpm4-1, INPUT, DOWN); > + PIN_SLP(gpm4-2, INPUT, DOWN); > + PIN_SLP(gpm4-3, INPUT, DOWN); > + PIN_SLP(gpm4-4, INPUT, DOWN); > + PIN_SLP(gpm4-5, INPUT, DOWN); > + PIN_SLP(gpm4-6, INPUT, DOWN); > + PIN_SLP(gpm4-7, INPUT, DOWN); > + }; > +}; > -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
