Hi Andreas, On Mon, Nov 24, 2014 at 8:35 PM, Andreas Färber <afaer...@suse.de> wrote: > Hi, > > Am 24.11.2014 um 11:05 schrieb Javier Martinez Canillas: >> On 11/21/2014 09:57 PM, Javier Martinez Canillas wrote: >>> On 11/21/2014 06:32 PM, Ajay kumar wrote: >>>> I have rebased my bridge series on top of linux-next. >>>> >>>> This is my git log: >>>> 4b38a6f Revert "Revert "ARM: exynos_defconfig: Enable options for >>>> display panel support"" >>>> 6fb39a7 ARM: dts: peach-pit: represent the connection between bridge >>>> and panel using videoport and endpoints >>>> aee649c ARM: dts: snow: represent the connection between bridge and >>>> panel using videoport and endpoints >>>> 5b76d8d drm/bridge: Add i2c based driver for ps8622/ps8625 bridge >>>> 581257f Documentation: bridge: Add documentation for ps8622 DT properties >>>> 178e8b9 Documentation: devicetree: Add vendor prefix for parade >>>> 0ceea75 Documentation: drm: bridge: move to video/bridge >>>> f143e2e drm/bridge: ptn3460: use gpiod interface >>>> 2d5cb9d drm/bridge: ptn3460: probe connector at the end of bridge attach >>>> 32ac563 drm/bridge: ptn3460: support drm_panel >>>> 91c6c30 drm/exynos: dp: support drm_bridge >>>> 7eea7eb drm/bridge: ptn3460: Convert to i2c driver model >>>> 602f343 drm/bridge: make bridge registration independent of drm flow >>>> 14c7143 drm/bridge: do not pass drm_bridge_funcs to drm_bridge_init >>>> 2c01ac4 drm/bridge: ptn3460: Few trivial cleanups >>>> 7415f6c arm: dts: Exynos5: Use pmu_system_controller phandle for dp phy >>>> 28655d1 drm/exynos: Move platform drivers registration to module init >>>> ed6778a Add linux-next specific files for 20141121 >>>> >>>> I have attached the rebased patches as well. >>>> I tested it on snow, peach_pit and peach_pi without *clk_ignore_unused*. >>>> Display is totally fine with exynos_defconfig (booting is fine even >>>> with CONFIG_SND_SOC_SNOW=y) >>> >>> Thanks for forward porting your patches to linux-next. Unfortunately I >>> won't have time to test them until Monday but I wonder why you didn't >>> have the boot issues that we have with next-20141121. >> >> I tested your ToT patches on top of next-20141121, this is my git log: >> >> 93fe3d7 Revert "Revert "ARM: exynos_defconfig: Enable options for display >> panel support"" >> 552f74e ARM: dts: peach-pit: represent the connection between bridge and >> panel using videoport and endpoints >> dbbc293 ARM: dts: snow: represent the connection between bridge and panel >> using videoport and endpoints >> d8687f8 drm/bridge: Add i2c based driver for ps8622/ps8625 bridge >> f29a649 Documentation: bridge: Add documentation for ps8622 DT properties >> 6ade887 Documentation: devicetree: Add vendor prefix for parade >> d81c42d Documentation: drm: bridge: move to video/bridge >> 50b9828 drm/bridge: ptn3460: use gpiod interface >> 1274c56 drm/bridge: ptn3460: probe connector at the end of bridge attach >> f3cf063 drm/bridge: ptn3460: support drm_panel >> cab682b drm/exynos: dp: support drm_bridge >> 6e78916 drm/bridge: ptn3460: Convert to i2c driver model >> 93f4b5f drm/bridge: make bridge registration independent of drm flow >> 81a038f drm/bridge: do not pass drm_bridge_funcs to drm_bridge_init >> eb6996e drm/bridge: ptn3460: Few trivial cleanups >> c41fa5d arm: dts: Exynos5: Use pmu_system_controller phandle for dp phy >> 51b2c75 drm/exynos: Move platform drivers registration to module init >> ed6778a Add linux-next specific files for 20141121 >> >>> I found that the commit ae43b32 ("ARM: 8202/1: dmaengine: pl330: Add >>> runtime Power Management support v12") had to be reverted in order to >>> boot linux-next. >>> >> >> Display works but I needed to revert the mentioned commit, otherwise >> the boot hangs as reported before. I'm using exynos_defconfig and this >> kernel command line: >> >> console=ttySAC3,115200N8 debug earlyprintk root=/dev/mmcblk1p2 rootwait rw > > I tested Spring with next-20141124, and finally got it to work! :) That's great to hear!
> Thanks a lot, Ajay and Javier! > > To be on the safe side, I reverted the patch pointed out by Javier and > was still using clk_ignore_unused. > > Ajay, note that your rebased Snow patch has the last hunk indented one > level too deep. Ahh, right. I just saw that. I am not sure if these patches go in just like this, or I need to rebase on top of kukjin's for-next or some other branch/tree! Will take care of this, then. > > I'll post a cleaned-up bridge patch for Spring later. Ok, AFAIK, peach_pit DT properties can be reused. Ajay -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html