Exynos 4 and 5 family of SoCs uses almost identical TMU sensor to measure the on chip temperature. For this reason it is possible to group TMU configuration parameters in one dts file.
Signed-off-by: Lukasz Majewski <l.majew...@samsung.com> --- Changes for v2: - None Changes for v3: - "samsung,tmu_" prefix for TMU specific properties has been added --- arch/arm/boot/dts/exynos4412-tmu-sensor-conf.dtsi | 24 +++++++++++++++++++++++ 1 file changed, 24 insertions(+) create mode 100644 arch/arm/boot/dts/exynos4412-tmu-sensor-conf.dtsi diff --git a/arch/arm/boot/dts/exynos4412-tmu-sensor-conf.dtsi b/arch/arm/boot/dts/exynos4412-tmu-sensor-conf.dtsi new file mode 100644 index 0000000..e3f7934 --- /dev/null +++ b/arch/arm/boot/dts/exynos4412-tmu-sensor-conf.dtsi @@ -0,0 +1,24 @@ +/* + * Device tree sources for Exynos4412 TMU sensor configuration + * + * Copyright (c) 2014 Lukasz Majewski <l.majew...@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <dt-bindings/thermal/thermal_exynos.h> + +#thermal-sensor-cells = <0>; +samsung,tmu_gain = <8>; +samsung,tmu_reference_voltage = <16>; +samsung,tmu_noise_cancel_mode = <4>; +samsung,tmu_efuse_value = <55>; +samsung,tmu_min_efuse_value = <40>; +samsung,tmu_max_efuse_value = <100>; +samsung,tmu_first_point_trim = <25>; +samsung,tmu_second_point_trim = <85>; +samsung,tmu_default_temp_offset = <50>; +samsung,tmu_cal_type = <TYPE_ONE_POINT_TRIMMING>; -- 2.0.0.rc2 -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
