Sjoerd Simons <sjoerd.sim...@collabora.co.uk> writes:
> Hey kevin,
>
> On Tue, 2015-01-13 at 16:03 -0800, Kevin Hilman wrote:
>> From: Kevin Hilman <khil...@linaro.org>
>>
>> The odroid-xu3 has 4 INA231 current sensors on board which can be
>> accessed from the Linux via the hwmon interface.
>>
>> There is one sensor for each of these power rails:
>>
>> - A15 cluster: VDD_ARM
>> - A7 cluster: VDD_KFC
>> - GPU: VDD_G3D
>> - memory: VDD_MEM
>>
>> In addition to adding the sensors, LDO26 from the PMIC needs to be
>> enabled because it's powering these sensor.
>>
>> Cc: Javier Martinez Canillas <javier.marti...@collabora.co.uk>
>> Cc: Sjoerd Simons <sjoerd.sim...@collabora.co.uk>
>> Signed-off-by: Kevin Hilman <khil...@linaro.org>
>> ---
>> Applies on top of "ARM: dts: Add dts file for odroid XU3 board" from Sjoerd
>> Simons.
>>
>> arch/arm/boot/dts/exynos5422-odroidxu3.dts | 39
>> ++++++++++++++++++++++++++++++
>> 1 file changed, 39 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3.dts
>> b/arch/arm/boot/dts/exynos5422-odroidxu3.dts
>> index c29123c0734d..7874da20939f 100644
>> --- a/arch/arm/boot/dts/exynos5422-odroidxu3.dts
>> +++ b/arch/arm/boot/dts/exynos5422-odroidxu3.dts
>> @@ -257,6 +264,38 @@
>> };
>> };
>>
>> + i2c_0: i2c@12C60000 {
>> + status = "okay";
>> +
>> + /* A15 cluster: VDD_ARM */
>> + ina220@40 {
> ^ ina231@40 ?
>> + compatible = "ti,ina230";
>
> This feels incredibly nitpicky, but would it not better to use ti,ina231
> as it's an INA231 chip not a INA230? (And add the compatibility string
> to the driver)
Hmm, you're right. Until recently, I thought these were INA230s, but
squinted enough at the schematic yesterday to notice they were marked as
INA231, so updated the changelog, but not the DTS.
Will re-spin with a compatible string update to the driver.
Kevin
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
