Some WLAN chips attached to a SDIO interface, need an external clock
to be operational. Since this is very common, extend the simple MMC
power sequence DT binding to support an optional clock.
Signed-off-by: Javier Martinez Canillas <javier.marti...@collabora.co.uk>
---
Changes since v1: None.
---
Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt
b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt
index eaae652213ae..a462c50f19a8 100644
--- a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt
+++ b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt
@@ -12,6 +12,10 @@ Optional properties:
at initialization and prior we start the power up procedure of the card.
They will be de-asserted right after the power has been provided to the
card.
+- clocks : Must contain an entry for the entry in clock-names.
+ See ../clocks/clock-bindings.txt for details.
+- clock-names : Must include the following entry:
+ "ext_clock" (External clock provided to the card).
Example:
--
2.1.3
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
