The i2c_7 node (i2c@12CD0000) with LVDS bridge child node was put in
Exynos5250 Snow DTS file twice. Move the LVDS bridge to proper existing
i2c_7 node.

Signed-off-by: Krzysztof Kozlowski <k.kozlowsk...@gmail.com>
---
 arch/arm/boot/dts/exynos5250-snow.dts | 46 +++++++++++++++++------------------
 1 file changed, 22 insertions(+), 24 deletions(-)

diff --git a/arch/arm/boot/dts/exynos5250-snow.dts 
b/arch/arm/boot/dts/exynos5250-snow.dts
index 2657e842e5a5..7ecdad0517e7 100644
--- a/arch/arm/boot/dts/exynos5250-snow.dts
+++ b/arch/arm/boot/dts/exynos5250-snow.dts
@@ -177,30 +177,6 @@
                };
        };
 
-       i2c@12CD0000 {
-               ptn3460: lvds-bridge@20 {
-                       compatible = "nxp,ptn3460";
-                       reg = <0x20>;
-                       powerdown-gpios = <&gpy2 5 GPIO_ACTIVE_HIGH>;
-                       reset-gpios = <&gpx1 5 GPIO_ACTIVE_HIGH>;
-                       edid-emulation = <5>;
-
-                       ports {
-                               port@0 {
-                                       bridge_out: endpoint {
-                                               remote-endpoint = <&panel_in>;
-                                       };
-                               };
-
-                               port@1 {
-                                       bridge_in: endpoint {
-                                               remote-endpoint = <&dp_out>;
-                                       };
-                               };
-                       };
-               };
-       };
-
        sound {
                compatible = "google,snow-audio-max98095";
 
@@ -507,6 +483,28 @@
        samsung,i2c-sda-delay = <100>;
        samsung,i2c-max-bus-freq = <66000>;
 
+       ptn3460: lvds-bridge@20 {
+               compatible = "nxp,ptn3460";
+               reg = <0x20>;
+               powerdown-gpios = <&gpy2 5 GPIO_ACTIVE_HIGH>;
+               reset-gpios = <&gpx1 5 GPIO_ACTIVE_HIGH>;
+               edid-emulation = <5>;
+
+               ports {
+                       port@0 {
+                               bridge_out: endpoint {
+                                       remote-endpoint = <&panel_in>;
+                               };
+                       };
+
+                       port@1 {
+                               bridge_in: endpoint {
+                                       remote-endpoint = <&dp_out>;
+                               };
+                       };
+               };
+       };
+
        max98095: codec@11 {
                compatible = "maxim,max98095";
                reg = <0x11>;
-- 
2.1.0

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to