The patch fixes / extends the runtime PM handling.
- Currently the driver instructs the SPI core to use auto-suspend
but doesn't configure it. Add the necessary calls and let it
autosuspend after probe.
- In case the driver registration fails runtime PM needs to be
properly disabled.
Signed-off-by: Heiner Kallweit <hkallwe...@gmail.com>
---
drivers/spi/spi-s3c64xx.c | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
index c4d3b06..15a6de1 100644
--- a/drivers/spi/spi-s3c64xx.c
+++ b/drivers/spi/spi-s3c64xx.c
@@ -32,6 +32,7 @@
#define MAX_SPI_PORTS 6
#define S3C64XX_SPI_QUIRK_POLL (1 << 0)
#define S3C64XX_SPI_QUIRK_CS_AUTO (1 << 1)
+#define AUTOSUSPEND_TIMEOUT 2000
/* Registers and bit-fields */
@@ -1180,13 +1181,15 @@ static int s3c64xx_spi_probe(struct platform_device
*pdev)
S3C64XX_SPI_INT_TX_OVERRUN_EN | S3C64XX_SPI_INT_TX_UNDERRUN_EN,
sdd->regs + S3C64XX_SPI_INT_EN);
+ pm_runtime_set_autosuspend_delay(dev, AUTOSUSPEND_TIMEOUT);
+ pm_runtime_use_autosuspend(dev);
pm_runtime_set_active(dev);
pm_runtime_enable(dev);
ret = devm_spi_register_master(dev, master);
if (ret != 0) {
dev_err(dev, "cannot register SPI master: %d\n", ret);
- goto err3;
+ goto err4;
}
dev_dbg(dev, "Samsung SoC SPI Driver loaded for Bus SPI-%d with %d
Slaves attached\n",
@@ -1195,8 +1198,14 @@ static int s3c64xx_spi_probe(struct platform_device
*pdev)
mem_res, (FIFO_LVL_MASK(sdd) >> 1) + 1,
sdd->rx_dma.dmach, sdd->tx_dma.dmach);
+ pm_runtime_mark_last_busy(dev);
+ pm_runtime_autosuspend(dev);
+
return 0;
+err4:
+ pm_runtime_disable(dev);
+ pm_runtime_set_suspended(dev);
err3:
clk_disable_unprepare(sdd->src_clk);
err2:
--
2.5.0
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
