Em Tue, 29 Sep 2015 13:57:35 +0200
Javier Martinez Canillas <jav...@osg.samsung.com> escreveu:
> There are 2 revisions of the Exynos5250 Snow Chromebook that were shipped:
> Rev4 and Rev5. The only difference between these 2 revisions is the codec,
> Rev4 has a max98095 codec while Rev5 has a max98090.
>
> Mainline only supports Rev4 so this patch moves the common device nodes to
> a DTSI file and adds a DTS for the Exynos5250 Snow Rev5.
>
> The Snow Rev5 DTS is based on the DTS found in the ChromiumOS 3.8 tree.
>
> Signed-off-by: Javier Martinez Canillas <jav...@osg.samsung.com>
Tested-by: Mauro Carvalho Chehab <mche...@osg.samsung.com>
Tested on my Chromebook snow revision 5, with the following its file:
/dts-v1/;
/ {
description = "Chrome OS kernel image with one or more FDT blobs";
#address-cells = <1>;
images {
kernel@1{
description = "kernel";
data = /incbin/("arch/arm/boot/zImage");
type = "kernel_noload";
arch = "arm";
os = "linux";
compression = "none";
load = <0>;
entry = <0>;
};
fdt@1{
description = "exynos5250-snow.dtb";
data = /incbin/("arch/arm/boot/dts/exynos5250-snow.dtb");
type = "flat_dt";
arch = "arm";
compression = "none";
hash@1{
algo = "sha1";
};
};
fdt@2{
description = "exynos5800-peach-pi.dtb";
data = /incbin/("arch/arm/boot/dts/exynos5800-peach-pi.dtb");
type = "flat_dt";
arch = "arm";
compression = "none";
hash@1{
algo = "sha1";
};
};
fdt@3{
description = "exynos5250-snow-rev5.dtb";
data = /incbin/("arch/arm/boot/dts/exynos5250-snow-rev5.dtb");
type = "flat_dt";
arch = "arm";
compression = "none";
hash@1{
algo = "sha1";
};
};
};
configurations {
default = "conf@1";
conf@1{
kernel = "kernel@1";
fdt = "fdt@1";
};
conf@2{
kernel = "kernel@1";
fdt = "fdt@2";
};
conf@3{
kernel = "kernel@1";
fdt = "fdt@3";
};
};
};
After this patch, is is now properly detecting the audio chipset:
[ 0.897587] max98090 7-0010: MAX98090 REVID=0x43
[ 0.900135] max98090 7-0010: use default 2.8v micbias
>
> ---
>
> The DTS in the vendor ChromeOS tree are called exynos5250-snow-rev{4,5}.dtb
> but I decided to leave Rev4 as exynos5250-snow.dtb to avoid breaking u-boot
> that has CONFIG_DEFAULT_DEVICE_TREE="exynos5250-snow" in snow_defconfig.
>
> Also, ChromiumOS Rev4 DTS has "google,snow-rev4" in its compatible string
> but was not added in mainline since Rev4 firmware fallbacks to "google,snow"
> and Rev5 searches for "google,snow-rev5". That way the compatible string
> could be consistent with the DTS naming and still be able to pack both Rev4
> and Rev5 FDT in the same FIT image and let the firmware pick the correct FDT.
>
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/exynos5250-snow-common.dtsi | 684
> ++++++++++++++++++++++++++
> arch/arm/boot/dts/exynos5250-snow-rev5.dts | 47 ++
> arch/arm/boot/dts/exynos5250-snow.dts | 666 +------------------------
> 4 files changed, 733 insertions(+), 665 deletions(-)
> create mode 100644 arch/arm/boot/dts/exynos5250-snow-common.dtsi
> create mode 100644 arch/arm/boot/dts/exynos5250-snow-rev5.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 5436ad479b08..a2408a63b341 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -115,6 +115,7 @@ dtb-$(CONFIG_ARCH_EXYNOS5) += \
> exynos5250-arndale.dtb \
> exynos5250-smdk5250.dtb \
> exynos5250-snow.dtb \
> + exynos5250-snow-rev5.dtb \
> exynos5250-spring.dtb \
> exynos5260-xyref5260.dtb \
> exynos5410-smdk5410.dtb \
> diff --git a/arch/arm/boot/dts/exynos5250-snow-common.dtsi
> b/arch/arm/boot/dts/exynos5250-snow-common.dtsi
> new file mode 100644
> index 000000000000..0a7f408824d8
> --- /dev/null
> +++ b/arch/arm/boot/dts/exynos5250-snow-common.dtsi
> @@ -0,0 +1,684 @@
> +/*
> + * Google Snow board device tree source
> + *
> + * Copyright (c) 2012 Google, Inc
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/clock/maxim,max77686.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/input/input.h>
> +#include "exynos5250.dtsi"
> +
> +/ {
> + aliases {
> + i2c104 = &i2c_104;
> + };
> +
> + memory {
> + reg = <0x40000000 0x80000000>;
> + };
> +
> + chosen {
> + bootargs = "console=tty1";
> + stdout-path = "serial3:115200n8";
> + };
> +
> + gpio-keys {
> + compatible = "gpio-keys";
> + pinctrl-names = "default";
> + pinctrl-0 = <&power_key_irq &lid_irq>;
> +
> + power {
> + label = "Power";
> + gpios = <&gpx1 3 GPIO_ACTIVE_LOW>;
> + linux,code = <KEY_POWER>;
> + gpio-key,wakeup;
> + };
> +
> + lid-switch {
> + label = "Lid";
> + gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
> + linux,input-type = <5>; /* EV_SW */
> + linux,code = <0>; /* SW_LID */
> + debounce-interval = <1>;
> + gpio-key,wakeup;
> + };
> + };
> +
> + vbat: vbat-fixed-regulator {
> + compatible = "regulator-fixed";
> + regulator-name = "vbat-supply";
> + regulator-boot-on;
> + };
> +
> + i2c-arbitrator {
> + compatible = "i2c-arb-gpio-challenge";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + i2c-parent = <&{/i2c@12CA0000}>;
> +
> + our-claim-gpio = <&gpf0 3 GPIO_ACTIVE_LOW>;
> + their-claim-gpios = <&gpe0 4 GPIO_ACTIVE_LOW>;
> + slew-delay-us = <10>;
> + wait-retry-us = <3000>;
> + wait-free-us = <50000>;
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&arb_our_claim &arb_their_claim>;
> +
> + /* Use ID 104 as a hint that we're on physical bus 4 */
> + i2c_104: i2c@0 {
> + reg = <0>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + battery: sbs-battery@b {
> + compatible = "sbs,sbs-battery";
> + reg = <0xb>;
> + sbs,poll-retry-count = <1>;
> + };
> +
> + cros_ec: embedded-controller {
> + compatible = "google,cros-ec-i2c";
> + reg = <0x1e>;
> + interrupts = <6 IRQ_TYPE_NONE>;
> + interrupt-parent = <&gpx1>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&ec_irq>;
> + wakeup-source;
> + };
> +
> + power-regulator {
> + compatible = "ti,tps65090";
> + reg = <0x48>;
> +
> + /*
> + * Config irq to disable internal pulls
> + * even though we run in polling mode.
> + */
> + pinctrl-names = "default";
> + pinctrl-0 = <&tps65090_irq>;
> +
> + vsys1-supply = <&vbat>;
> + vsys2-supply = <&vbat>;
> + vsys3-supply = <&vbat>;
> + infet1-supply = <&vbat>;
> + infet2-supply = <&vbat>;
> + infet3-supply = <&vbat>;
> + infet4-supply = <&vbat>;
> + infet5-supply = <&vbat>;
> + infet6-supply = <&vbat>;
> + infet7-supply = <&vbat>;
> + vsys-l1-supply = <&vbat>;
> + vsys-l2-supply = <&vbat>;
> +
> + regulators {
> + dcdc1 {
> + ti,enable-ext-control;
> + };
> + dcdc2 {
> + ti,enable-ext-control;
> + };
> + dcdc3 {
> + ti,enable-ext-control;
> + };
> + fet1: fet1 {
> + regulator-name = "vcd_led";
> + ti,overcurrent-wait = <3>;
> + };
> + tps65090_fet2: fet2 {
> + regulator-name = "video_mid";
> + regulator-always-on;
> + ti,overcurrent-wait = <3>;
> + };
> + fet3 {
> + regulator-name = "wwan_r";
> + regulator-always-on;
> + ti,overcurrent-wait = <3>;
> + };
> + fet4 {
> + regulator-name = "sdcard";
> + ti,overcurrent-wait = <3>;
> + };
> + fet5 {
> + regulator-name = "camout";
> + regulator-always-on;
> + ti,overcurrent-wait = <3>;
> + };
> + fet6: fet6 {
> + regulator-name = "lcd_vdd";
> + ti,overcurrent-wait = <3>;
> + };
> + tps65090_fet7: fet7 {
> + regulator-name = "video_mid_1a";
> + regulator-always-on;
> + ti,overcurrent-wait = <3>;
> + };
> + ldo1 {
> + };
> + ldo2 {
> + };
> + };
> +
> + charger {
> + compatible = "ti,tps65090-charger";
> + };
> + };
> + };
> + };
> +
> + sound {
> + samsung,i2s-controller = <&i2s0>;
> + };
> +
> + usb3_vbus_reg: regulator-usb3 {
> + compatible = "regulator-fixed";
> + regulator-name = "P5.0V_USB3CON";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + gpio = <&gpx2 7 GPIO_ACTIVE_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&usb3_vbus_en>;
> + enable-active-high;
> + };
> +
> + fixed-rate-clocks {
> + xxti {
> + compatible = "samsung,clock-xxti";
> + clock-frequency = <24000000>;
> + };
> + };
> +
> + backlight: backlight {
> + compatible = "pwm-backlight";
> + pwms = <&pwm 0 1000000 0>;
> + brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
> + default-brightness-level = <7>;
> + enable-gpios = <&gpx3 0 GPIO_ACTIVE_HIGH>;
> + power-supply = <&fet1>;
> + pinctrl-0 = <&pwm0_out>;
> + pinctrl-names = "default";
> + };
> +
> + panel: panel {
> + compatible = "auo,b116xw03";
> + power-supply = <&fet6>;
> + backlight = <&backlight>;
> +
> + port {
> + panel_in: endpoint {
> + remote-endpoint = <&bridge_out>;
> + };
> + };
> + };
> +
> + mmc3_pwrseq: mmc3_pwrseq {
> + compatible = "mmc-pwrseq-simple";
> + reset-gpios = <&gpx0 2 GPIO_ACTIVE_LOW>, /* WIFI_RSTn */
> + <&gpx0 1 GPIO_ACTIVE_LOW>; /* WIFI_EN */
> + clocks = <&max77686 MAX77686_CLK_PMIC>;
> + clock-names = "ext_clock";
> + };
> +};
> +
> +&cpu0 {
> + cpu0-supply = <&buck2_reg>;
> +};
> +
> +&dp {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&dp_hpd>;
> + samsung,color-space = <0>;
> + samsung,dynamic-range = <0>;
> + samsung,ycbcr-coeff = <0>;
> + samsung,color-depth = <1>;
> + samsung,link-rate = <0x0a>;
> + samsung,lane-count = <2>;
> + samsung,hpd-gpio = <&gpx0 7 GPIO_ACTIVE_HIGH>;
> +
> + ports {
> + port@0 {
> + dp_out: endpoint {
> + remote-endpoint = <&bridge_in>;
> + };
> + };
> + };
> +};
> +
> +&ehci {
> + samsung,vbus-gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
> +};
> +
> +&fimd {
> + status = "okay";
> + samsung,invert-vclk;
> +};
> +
> +&hdmi {
> + hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&hdmi_hpd_irq>;
> + phy = <&hdmiphy>;
> + ddc = <&i2c_2>;
> + hdmi-en-supply = <&tps65090_fet7>;
> + vdd-supply = <&ldo8_reg>;
> + vdd_osc-supply = <&ldo10_reg>;
> + vdd_pll-supply = <&ldo8_reg>;
> +};
> +
> +&i2c_0 {
> + status = "okay";
> + samsung,i2c-sda-delay = <100>;
> + samsung,i2c-max-bus-freq = <378000>;
> +
> + max77686: max77686@09 {
> + compatible = "maxim,max77686";
> + interrupt-parent = <&gpx3>;
> + interrupts = <2 IRQ_TYPE_NONE>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&max77686_irq>;
> + wakeup-source;
> + reg = <0x09>;
> + #clock-cells = <1>;
> +
> + voltage-regulators {
> + ldo1_reg: LDO1 {
> + regulator-name = "P1.0V_LDO_OUT1";
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-always-on;
> + };
> +
> + ldo2_reg: LDO2 {
> + regulator-name = "P1.8V_LDO_OUT2";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + };
> +
> + ldo3_reg: LDO3 {
> + regulator-name = "P1.8V_LDO_OUT3";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + };
> +
> + ldo7_reg: LDO7 {
> + regulator-name = "P1.1V_LDO_OUT7";
> + regulator-min-microvolt = <1100000>;
> + regulator-max-microvolt = <1100000>;
> + regulator-always-on;
> + };
> +
> + ldo8_reg: LDO8 {
> + regulator-name = "P1.0V_LDO_OUT8";
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-always-on;
> + };
> +
> + ldo10_reg: LDO10 {
> + regulator-name = "P1.8V_LDO_OUT10";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + };
> +
> + ldo12_reg: LDO12 {
> + regulator-name = "P3.0V_LDO_OUT12";
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-always-on;
> + };
> +
> + ldo14_reg: LDO14 {
> + regulator-name = "P1.8V_LDO_OUT14";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + };
> +
> + ldo15_reg: LDO15 {
> + regulator-name = "P1.0V_LDO_OUT15";
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-always-on;
> + };
> +
> + ldo16_reg: LDO16 {
> + regulator-name = "P1.8V_LDO_OUT16";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + };
> +
> + buck1_reg: BUCK1 {
> + regulator-name = "vdd_mif";
> + regulator-min-microvolt = <950000>;
> + regulator-max-microvolt = <1300000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + buck2_reg: BUCK2 {
> + regulator-name = "vdd_arm";
> + regulator-min-microvolt = <850000>;
> + regulator-max-microvolt = <1350000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + buck3_reg: BUCK3 {
> + regulator-name = "vdd_int";
> + regulator-min-microvolt = <900000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + buck4_reg: BUCK4 {
> + regulator-name = "vdd_g3d";
> + regulator-min-microvolt = <850000>;
> + regulator-max-microvolt = <1300000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + buck5_reg: BUCK5 {
> + regulator-name = "P1.8V_BUCK_OUT5";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + buck6_reg: BUCK6 {
> + regulator-name = "P1.35V_BUCK_OUT6";
> + regulator-min-microvolt = <1350000>;
> + regulator-max-microvolt = <1350000>;
> + regulator-always-on;
> + };
> +
> + buck7_reg: BUCK7 {
> + regulator-name = "P2.0V_BUCK_OUT7";
> + regulator-min-microvolt = <2000000>;
> + regulator-max-microvolt = <2000000>;
> + regulator-always-on;
> + };
> +
> + buck8_reg: BUCK8 {
> + regulator-name = "P2.85V_BUCK_OUT8";
> + regulator-min-microvolt = <2850000>;
> + regulator-max-microvolt = <2850000>;
> + regulator-always-on;
> + };
> + };
> + };
> +};
> +
> +&i2c_1 {
> + status = "okay";
> + samsung,i2c-sda-delay = <100>;
> + samsung,i2c-max-bus-freq = <378000>;
> +
> + trackpad {
> + reg = <0x67>;
> + compatible = "cypress,cyapa";
> + interrupts = <2 IRQ_TYPE_NONE>;
> + interrupt-parent = <&gpx1>;
> + wakeup-source;
> + };
> +};
> +
> +/*
> + * Disabled pullups since external part has its own pullups and
> + * double-pulling gets us out of spec in some cases.
> + */
> +&i2c2_bus {
> + samsung,pin-pud = <0>;
> +};
> +
> +&i2c_2 {
> + status = "okay";
> + samsung,i2c-sda-delay = <100>;
> + samsung,i2c-max-bus-freq = <66000>;
> +
> + hdmiddc@50 {
> + compatible = "samsung,exynos4210-hdmiddc";
> + reg = <0x50>;
> + };
> +};
> +
> +&i2c_3 {
> + status = "okay";
> + samsung,i2c-sda-delay = <100>;
> + samsung,i2c-max-bus-freq = <66000>;
> +};
> +
> +&i2c_4 {
> + status = "okay";
> + samsung,i2c-sda-delay = <100>;
> + samsung,i2c-max-bus-freq = <66000>;
> +};
> +
> +&i2c_5 {
> + status = "okay";
> + samsung,i2c-sda-delay = <100>;
> + samsung,i2c-max-bus-freq = <66000>;
> +};
> +
> +&i2c_7 {
> + status = "okay";
> + samsung,i2c-sda-delay = <100>;
> + samsung,i2c-max-bus-freq = <66000>;
> +
> + ptn3460: lvds-bridge@20 {
> + compatible = "nxp,ptn3460";
> + reg = <0x20>;
> + powerdown-gpios = <&gpy2 5 GPIO_ACTIVE_HIGH>;
> + reset-gpios = <&gpx1 5 GPIO_ACTIVE_HIGH>;
> + edid-emulation = <5>;
> +
> + ports {
> + port@0 {
> + bridge_out: endpoint {
> + remote-endpoint = <&panel_in>;
> + };
> + };
> +
> + port@1 {
> + bridge_in: endpoint {
> + remote-endpoint = <&dp_out>;
> + };
> + };
> + };
> + };
> +};
> +
> +&i2c_8 {
> + status = "okay";
> + samsung,i2c-sda-delay = <100>;
> + samsung,i2c-max-bus-freq = <378000>;
> +
> + hdmiphy: hdmiphy@38 {
> + compatible = "samsung,exynos4212-hdmiphy";
> + reg = <0x38>;
> + };
> +};
> +
> +&i2s0 {
> + status = "okay";
> +};
> +
> +&mmc_0 {
> + status = "okay";
> + num-slots = <1>;
> + broken-cd;
> + card-detect-delay = <200>;
> + samsung,dw-mshc-ciu-div = <3>;
> + samsung,dw-mshc-sdr-timing = <2 3>;
> + samsung,dw-mshc-ddr-timing = <1 2>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>;
> + bus-width = <8>;
> + cap-mmc-highspeed;
> +};
> +
> +&mmc_2 {
> + status = "okay";
> + num-slots = <1>;
> + card-detect-delay = <200>;
> + samsung,dw-mshc-ciu-div = <3>;
> + samsung,dw-mshc-sdr-timing = <2 3>;
> + samsung,dw-mshc-ddr-timing = <1 2>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
> + bus-width = <4>;
> + wp-gpios = <&gpc2 1 GPIO_ACTIVE_HIGH>;
> + cap-sd-highspeed;
> +};
> +
> +/*
> + * On Snow we've got SIP WiFi and so can keep drive strengths low to
> + * reduce EMI.
> + */
> +&mmc_3 {
> + status = "okay";
> + num-slots = <1>;
> + broken-cd;
> + cap-sdio-irq;
> + keep-power-in-suspend;
> + card-detect-delay = <200>;
> + samsung,dw-mshc-ciu-div = <3>;
> + samsung,dw-mshc-sdr-timing = <2 3>;
> + samsung,dw-mshc-ddr-timing = <1 2>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4 &wifi_en &wifi_rst>;
> + bus-width = <4>;
> + cap-sd-highspeed;
> + mmc-pwrseq = <&mmc3_pwrseq>;
> +};
> +
> +&pinctrl_0 {
> + wifi_en: wifi-en {
> + samsung,pins = "gpx0-1";
> + samsung,pin-function = <1>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <0>;
> + };
> +
> + wifi_rst: wifi-rst {
> + samsung,pins = "gpx0-2";
> + samsung,pin-function = <1>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <0>;
> + };
> +
> + power_key_irq: power-key-irq {
> + samsung,pins = "gpx1-3";
> + samsung,pin-function = <0xf>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <0>;
> + };
> +
> + ec_irq: ec-irq {
> + samsung,pins = "gpx1-6";
> + samsung,pin-function = <0>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <0>;
> + };
> +
> + tps65090_irq: tps65090-irq {
> + samsung,pins = "gpx2-6";
> + samsung,pin-function = <0>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <0>;
> + };
> +
> + usb3_vbus_en: usb3-vbus-en {
> + samsung,pins = "gpx2-7";
> + samsung,pin-function = <1>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <0>;
> + };
> +
> + max77686_irq: max77686-irq {
> + samsung,pins = "gpx3-2";
> + samsung,pin-function = <0>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <0>;
> + };
> +
> + lid_irq: lid-irq {
> + samsung,pins = "gpx3-5";
> + samsung,pin-function = <0xf>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <0>;
> + };
> +
> + hdmi_hpd_irq: hdmi-hpd-irq {
> + samsung,pins = "gpx3-7";
> + samsung,pin-function = <0>;
> + samsung,pin-pud = <1>;
> + samsung,pin-drv = <0>;
> + };
> +};
> +
> +&pinctrl_1 {
> + arb_their_claim: arb-their-claim {
> + samsung,pins = "gpe0-4";
> + samsung,pin-function = <0>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <0>;
> + };
> +
> + arb_our_claim: arb-our-claim {
> + samsung,pins = "gpf0-3";
> + samsung,pin-function = <1>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <0>;
> + };
> +};
> +
> +&rtc {
> + status = "okay";
> + clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
> + clock-names = "rtc", "rtc_src";
> +};
> +
> +&sd3_bus4 {
> + samsung,pin-drv = <0>;
> +};
> +
> +&sd3_clk {
> + samsung,pin-drv = <0>;
> +};
> +
> +&sd3_cmd {
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <0>;
> +};
> +
> +&spi_1 {
> + status = "okay";
> + samsung,spi-src-clk = <0>;
> + num-cs = <1>;
> + cs-gpios = <&gpa2 5 GPIO_ACTIVE_HIGH>;
> +};
> +
> +&usbdrd_dwc3 {
> + dr_mode = "host";
> +};
> +
> +&usbdrd_phy {
> + vbus-supply = <&usb3_vbus_reg>;
> +};
> +
> +#include "cros-ec-keyboard.dtsi"
> diff --git a/arch/arm/boot/dts/exynos5250-snow-rev5.dts
> b/arch/arm/boot/dts/exynos5250-snow-rev5.dts
> new file mode 100644
> index 000000000000..ce5374547c3f
> --- /dev/null
> +++ b/arch/arm/boot/dts/exynos5250-snow-rev5.dts
> @@ -0,0 +1,47 @@
> +/*
> + * Google Snow Rev 5+ board device tree source
> + *
> + * Copyright (c) 2012 Google, Inc
> + * Copyright (c) 2015 Samsung Electronics Co., Ltd.
> + * http://www.samsung.com
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +/dts-v1/;
> +#include "exynos5250-snow-common.dtsi"
> +
> +/ {
> + model = "Google Snow Rev 5+";
> + compatible = "google,snow-rev5", "samsung,exynos5250",
> "samsung,exynos5";
> +
> + sound {
> + compatible = "google,snow-audio-max98090";
> +
> + samsung,model = "Snow-I2S-MAX98090";
> + samsung,audio-codec = <&max98090>;
> + };
> +};
> +
> +&i2c_7 {
> + max98090: codec@10 {
> + compatible = "maxim,max98090";
> + reg = <0x10>;
> + interrupts = <4 IRQ_TYPE_NONE>;
> + interrupt-parent = <&gpx0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&max98090_irq>;
> + };
> +};
> +
> +&pinctrl_0 {
> + max98090_irq: max98090-irq {
> + samsung,pins = "gpx0-4";
> + samsung,pin-function = <0>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <0>;
> + };
> +};
> +
> diff --git a/arch/arm/boot/dts/exynos5250-snow.dts
> b/arch/arm/boot/dts/exynos5250-snow.dts
> index 0720caab5511..99c4d2a9fcf9 100644
> --- a/arch/arm/boot/dts/exynos5250-snow.dts
> +++ b/arch/arm/boot/dts/exynos5250-snow.dts
> @@ -9,506 +9,21 @@
> */
>
> /dts-v1/;
> -#include <dt-bindings/gpio/gpio.h>
> -#include <dt-bindings/clock/maxim,max77686.h>
> -#include <dt-bindings/interrupt-controller/irq.h>
> -#include <dt-bindings/input/input.h>
> -#include "exynos5250.dtsi"
> +#include "exynos5250-snow-common.dtsi"
>
> / {
> model = "Google Snow";
> compatible = "google,snow", "samsung,exynos5250", "samsung,exynos5";
>
> - aliases {
> - i2c104 = &i2c_104;
> - };
> -
> - memory {
> - reg = <0x40000000 0x80000000>;
> - };
> -
> - chosen {
> - bootargs = "console=tty1";
> - stdout-path = "serial3:115200n8";
> - };
> -
> - gpio-keys {
> - compatible = "gpio-keys";
> - pinctrl-names = "default";
> - pinctrl-0 = <&power_key_irq &lid_irq>;
> -
> - power {
> - label = "Power";
> - gpios = <&gpx1 3 GPIO_ACTIVE_LOW>;
> - linux,code = <KEY_POWER>;
> - gpio-key,wakeup;
> - };
> -
> - lid-switch {
> - label = "Lid";
> - gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
> - linux,input-type = <5>; /* EV_SW */
> - linux,code = <0>; /* SW_LID */
> - debounce-interval = <1>;
> - gpio-key,wakeup;
> - };
> - };
> -
> - vbat: vbat-fixed-regulator {
> - compatible = "regulator-fixed";
> - regulator-name = "vbat-supply";
> - regulator-boot-on;
> - };
> -
> - i2c-arbitrator {
> - compatible = "i2c-arb-gpio-challenge";
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - i2c-parent = <&{/i2c@12CA0000}>;
> -
> - our-claim-gpio = <&gpf0 3 GPIO_ACTIVE_LOW>;
> - their-claim-gpios = <&gpe0 4 GPIO_ACTIVE_LOW>;
> - slew-delay-us = <10>;
> - wait-retry-us = <3000>;
> - wait-free-us = <50000>;
> -
> - pinctrl-names = "default";
> - pinctrl-0 = <&arb_our_claim &arb_their_claim>;
> -
> - /* Use ID 104 as a hint that we're on physical bus 4 */
> - i2c_104: i2c@0 {
> - reg = <0>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - battery: sbs-battery@b {
> - compatible = "sbs,sbs-battery";
> - reg = <0xb>;
> - sbs,poll-retry-count = <1>;
> - };
> -
> - cros_ec: embedded-controller {
> - compatible = "google,cros-ec-i2c";
> - reg = <0x1e>;
> - interrupts = <6 IRQ_TYPE_NONE>;
> - interrupt-parent = <&gpx1>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&ec_irq>;
> - wakeup-source;
> - };
> -
> - power-regulator {
> - compatible = "ti,tps65090";
> - reg = <0x48>;
> -
> - /*
> - * Config irq to disable internal pulls
> - * even though we run in polling mode.
> - */
> - pinctrl-names = "default";
> - pinctrl-0 = <&tps65090_irq>;
> -
> - vsys1-supply = <&vbat>;
> - vsys2-supply = <&vbat>;
> - vsys3-supply = <&vbat>;
> - infet1-supply = <&vbat>;
> - infet2-supply = <&vbat>;
> - infet3-supply = <&vbat>;
> - infet4-supply = <&vbat>;
> - infet5-supply = <&vbat>;
> - infet6-supply = <&vbat>;
> - infet7-supply = <&vbat>;
> - vsys-l1-supply = <&vbat>;
> - vsys-l2-supply = <&vbat>;
> -
> - regulators {
> - dcdc1 {
> - ti,enable-ext-control;
> - };
> - dcdc2 {
> - ti,enable-ext-control;
> - };
> - dcdc3 {
> - ti,enable-ext-control;
> - };
> - fet1: fet1 {
> - regulator-name = "vcd_led";
> - ti,overcurrent-wait = <3>;
> - };
> - tps65090_fet2: fet2 {
> - regulator-name = "video_mid";
> - regulator-always-on;
> - ti,overcurrent-wait = <3>;
> - };
> - fet3 {
> - regulator-name = "wwan_r";
> - regulator-always-on;
> - ti,overcurrent-wait = <3>;
> - };
> - fet4 {
> - regulator-name = "sdcard";
> - ti,overcurrent-wait = <3>;
> - };
> - fet5 {
> - regulator-name = "camout";
> - regulator-always-on;
> - ti,overcurrent-wait = <3>;
> - };
> - fet6: fet6 {
> - regulator-name = "lcd_vdd";
> - ti,overcurrent-wait = <3>;
> - };
> - tps65090_fet7: fet7 {
> - regulator-name = "video_mid_1a";
> - regulator-always-on;
> - ti,overcurrent-wait = <3>;
> - };
> - ldo1 {
> - };
> - ldo2 {
> - };
> - };
> -
> - charger {
> - compatible = "ti,tps65090-charger";
> - };
> - };
> - };
> - };
> -
> sound {
> compatible = "google,snow-audio-max98095";
>
> samsung,model = "Snow-I2S-MAX98095";
> - samsung,i2s-controller = <&i2s0>;
> samsung,audio-codec = <&max98095>;
> };
> -
> - usb3_vbus_reg: regulator-usb3 {
> - compatible = "regulator-fixed";
> - regulator-name = "P5.0V_USB3CON";
> - regulator-min-microvolt = <5000000>;
> - regulator-max-microvolt = <5000000>;
> - gpio = <&gpx2 7 GPIO_ACTIVE_HIGH>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&usb3_vbus_en>;
> - enable-active-high;
> - };
> -
> - fixed-rate-clocks {
> - xxti {
> - compatible = "samsung,clock-xxti";
> - clock-frequency = <24000000>;
> - };
> - };
> -
> - backlight: backlight {
> - compatible = "pwm-backlight";
> - pwms = <&pwm 0 1000000 0>;
> - brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
> - default-brightness-level = <7>;
> - enable-gpios = <&gpx3 0 GPIO_ACTIVE_HIGH>;
> - power-supply = <&fet1>;
> - pinctrl-0 = <&pwm0_out>;
> - pinctrl-names = "default";
> - };
> -
> - panel: panel {
> - compatible = "auo,b116xw03";
> - power-supply = <&fet6>;
> - backlight = <&backlight>;
> -
> - port {
> - panel_in: endpoint {
> - remote-endpoint = <&bridge_out>;
> - };
> - };
> - };
> -
> - mmc3_pwrseq: mmc3_pwrseq {
> - compatible = "mmc-pwrseq-simple";
> - reset-gpios = <&gpx0 2 GPIO_ACTIVE_LOW>, /* WIFI_RSTn */
> - <&gpx0 1 GPIO_ACTIVE_LOW>; /* WIFI_EN */
> - clocks = <&max77686 MAX77686_CLK_PMIC>;
> - clock-names = "ext_clock";
> - };
> -};
> -
> -&cpu0 {
> - cpu0-supply = <&buck2_reg>;
> -};
> -
> -&dp {
> - status = "okay";
> - pinctrl-names = "default";
> - pinctrl-0 = <&dp_hpd>;
> - samsung,color-space = <0>;
> - samsung,dynamic-range = <0>;
> - samsung,ycbcr-coeff = <0>;
> - samsung,color-depth = <1>;
> - samsung,link-rate = <0x0a>;
> - samsung,lane-count = <2>;
> - samsung,hpd-gpio = <&gpx0 7 GPIO_ACTIVE_HIGH>;
> -
> - ports {
> - port@0 {
> - dp_out: endpoint {
> - remote-endpoint = <&bridge_in>;
> - };
> - };
> - };
> -};
> -
> -&ehci {
> - samsung,vbus-gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
> -};
> -
> -&fimd {
> - status = "okay";
> - samsung,invert-vclk;
> -};
> -
> -&hdmi {
> - hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&hdmi_hpd_irq>;
> - phy = <&hdmiphy>;
> - ddc = <&i2c_2>;
> - hdmi-en-supply = <&tps65090_fet7>;
> - vdd-supply = <&ldo8_reg>;
> - vdd_osc-supply = <&ldo10_reg>;
> - vdd_pll-supply = <&ldo8_reg>;
> -};
> -
> -&i2c_0 {
> - status = "okay";
> - samsung,i2c-sda-delay = <100>;
> - samsung,i2c-max-bus-freq = <378000>;
> -
> - max77686: max77686@09 {
> - compatible = "maxim,max77686";
> - interrupt-parent = <&gpx3>;
> - interrupts = <2 IRQ_TYPE_NONE>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&max77686_irq>;
> - wakeup-source;
> - reg = <0x09>;
> - #clock-cells = <1>;
> -
> - voltage-regulators {
> - ldo1_reg: LDO1 {
> - regulator-name = "P1.0V_LDO_OUT1";
> - regulator-min-microvolt = <1000000>;
> - regulator-max-microvolt = <1000000>;
> - regulator-always-on;
> - };
> -
> - ldo2_reg: LDO2 {
> - regulator-name = "P1.8V_LDO_OUT2";
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> - regulator-always-on;
> - };
> -
> - ldo3_reg: LDO3 {
> - regulator-name = "P1.8V_LDO_OUT3";
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> - regulator-always-on;
> - };
> -
> - ldo7_reg: LDO7 {
> - regulator-name = "P1.1V_LDO_OUT7";
> - regulator-min-microvolt = <1100000>;
> - regulator-max-microvolt = <1100000>;
> - regulator-always-on;
> - };
> -
> - ldo8_reg: LDO8 {
> - regulator-name = "P1.0V_LDO_OUT8";
> - regulator-min-microvolt = <1000000>;
> - regulator-max-microvolt = <1000000>;
> - regulator-always-on;
> - };
> -
> - ldo10_reg: LDO10 {
> - regulator-name = "P1.8V_LDO_OUT10";
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> - regulator-always-on;
> - };
> -
> - ldo12_reg: LDO12 {
> - regulator-name = "P3.0V_LDO_OUT12";
> - regulator-min-microvolt = <3000000>;
> - regulator-max-microvolt = <3000000>;
> - regulator-always-on;
> - };
> -
> - ldo14_reg: LDO14 {
> - regulator-name = "P1.8V_LDO_OUT14";
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> - regulator-always-on;
> - };
> -
> - ldo15_reg: LDO15 {
> - regulator-name = "P1.0V_LDO_OUT15";
> - regulator-min-microvolt = <1000000>;
> - regulator-max-microvolt = <1000000>;
> - regulator-always-on;
> - };
> -
> - ldo16_reg: LDO16 {
> - regulator-name = "P1.8V_LDO_OUT16";
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> - regulator-always-on;
> - };
> -
> - buck1_reg: BUCK1 {
> - regulator-name = "vdd_mif";
> - regulator-min-microvolt = <950000>;
> - regulator-max-microvolt = <1300000>;
> - regulator-always-on;
> - regulator-boot-on;
> - };
> -
> - buck2_reg: BUCK2 {
> - regulator-name = "vdd_arm";
> - regulator-min-microvolt = <850000>;
> - regulator-max-microvolt = <1350000>;
> - regulator-always-on;
> - regulator-boot-on;
> - };
> -
> - buck3_reg: BUCK3 {
> - regulator-name = "vdd_int";
> - regulator-min-microvolt = <900000>;
> - regulator-max-microvolt = <1200000>;
> - regulator-always-on;
> - regulator-boot-on;
> - };
> -
> - buck4_reg: BUCK4 {
> - regulator-name = "vdd_g3d";
> - regulator-min-microvolt = <850000>;
> - regulator-max-microvolt = <1300000>;
> - regulator-always-on;
> - regulator-boot-on;
> - };
> -
> - buck5_reg: BUCK5 {
> - regulator-name = "P1.8V_BUCK_OUT5";
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> - regulator-always-on;
> - regulator-boot-on;
> - };
> -
> - buck6_reg: BUCK6 {
> - regulator-name = "P1.35V_BUCK_OUT6";
> - regulator-min-microvolt = <1350000>;
> - regulator-max-microvolt = <1350000>;
> - regulator-always-on;
> - };
> -
> - buck7_reg: BUCK7 {
> - regulator-name = "P2.0V_BUCK_OUT7";
> - regulator-min-microvolt = <2000000>;
> - regulator-max-microvolt = <2000000>;
> - regulator-always-on;
> - };
> -
> - buck8_reg: BUCK8 {
> - regulator-name = "P2.85V_BUCK_OUT8";
> - regulator-min-microvolt = <2850000>;
> - regulator-max-microvolt = <2850000>;
> - regulator-always-on;
> - };
> - };
> - };
> -};
> -
> -&i2c_1 {
> - status = "okay";
> - samsung,i2c-sda-delay = <100>;
> - samsung,i2c-max-bus-freq = <378000>;
> -
> - trackpad {
> - reg = <0x67>;
> - compatible = "cypress,cyapa";
> - interrupts = <2 IRQ_TYPE_NONE>;
> - interrupt-parent = <&gpx1>;
> - wakeup-source;
> - };
> -};
> -
> -/*
> - * Disabled pullups since external part has its own pullups and
> - * double-pulling gets us out of spec in some cases.
> - */
> -&i2c2_bus {
> - samsung,pin-pud = <0>;
> -};
> -
> -&i2c_2 {
> - status = "okay";
> - samsung,i2c-sda-delay = <100>;
> - samsung,i2c-max-bus-freq = <66000>;
> -
> - hdmiddc@50 {
> - compatible = "samsung,exynos4210-hdmiddc";
> - reg = <0x50>;
> - };
> -};
> -
> -&i2c_3 {
> - status = "okay";
> - samsung,i2c-sda-delay = <100>;
> - samsung,i2c-max-bus-freq = <66000>;
> -};
> -
> -&i2c_4 {
> - status = "okay";
> - samsung,i2c-sda-delay = <100>;
> - samsung,i2c-max-bus-freq = <66000>;
> -};
> -
> -&i2c_5 {
> - status = "okay";
> - samsung,i2c-sda-delay = <100>;
> - samsung,i2c-max-bus-freq = <66000>;
> };
>
> &i2c_7 {
> - status = "okay";
> - samsung,i2c-sda-delay = <100>;
> - samsung,i2c-max-bus-freq = <66000>;
> -
> - ptn3460: lvds-bridge@20 {
> - compatible = "nxp,ptn3460";
> - reg = <0x20>;
> - powerdown-gpios = <&gpy2 5 GPIO_ACTIVE_HIGH>;
> - reset-gpios = <&gpx1 5 GPIO_ACTIVE_HIGH>;
> - edid-emulation = <5>;
> -
> - ports {
> - port@0 {
> - bridge_out: endpoint {
> - remote-endpoint = <&panel_in>;
> - };
> - };
> -
> - port@1 {
> - bridge_in: endpoint {
> - remote-endpoint = <&dp_out>;
> - };
> - };
> - };
> - };
> -
> max98095: codec@11 {
> compatible = "maxim,max98095";
> reg = <0x11>;
> @@ -517,190 +32,11 @@
> };
> };
>
> -&i2c_8 {
> - status = "okay";
> - samsung,i2c-sda-delay = <100>;
> - samsung,i2c-max-bus-freq = <378000>;
> -
> - hdmiphy: hdmiphy@38 {
> - compatible = "samsung,exynos4212-hdmiphy";
> - reg = <0x38>;
> - };
> -};
> -
> -&i2s0 {
> - status = "okay";
> -};
> -
> -&mmc_0 {
> - status = "okay";
> - num-slots = <1>;
> - broken-cd;
> - card-detect-delay = <200>;
> - samsung,dw-mshc-ciu-div = <3>;
> - samsung,dw-mshc-sdr-timing = <2 3>;
> - samsung,dw-mshc-ddr-timing = <1 2>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>;
> - bus-width = <8>;
> - cap-mmc-highspeed;
> -};
> -
> -&mmc_2 {
> - status = "okay";
> - num-slots = <1>;
> - card-detect-delay = <200>;
> - samsung,dw-mshc-ciu-div = <3>;
> - samsung,dw-mshc-sdr-timing = <2 3>;
> - samsung,dw-mshc-ddr-timing = <1 2>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
> - bus-width = <4>;
> - wp-gpios = <&gpc2 1 GPIO_ACTIVE_HIGH>;
> - cap-sd-highspeed;
> -};
> -
> -/*
> - * On Snow we've got SIP WiFi and so can keep drive strengths low to
> - * reduce EMI.
> - */
> -&mmc_3 {
> - status = "okay";
> - num-slots = <1>;
> - broken-cd;
> - cap-sdio-irq;
> - keep-power-in-suspend;
> - card-detect-delay = <200>;
> - samsung,dw-mshc-ciu-div = <3>;
> - samsung,dw-mshc-sdr-timing = <2 3>;
> - samsung,dw-mshc-ddr-timing = <1 2>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4 &wifi_en &wifi_rst>;
> - bus-width = <4>;
> - cap-sd-highspeed;
> - mmc-pwrseq = <&mmc3_pwrseq>;
> -};
> -
> &pinctrl_0 {
> - wifi_en: wifi-en {
> - samsung,pins = "gpx0-1";
> - samsung,pin-function = <1>;
> - samsung,pin-pud = <0>;
> - samsung,pin-drv = <0>;
> - };
> -
> - wifi_rst: wifi-rst {
> - samsung,pins = "gpx0-2";
> - samsung,pin-function = <1>;
> - samsung,pin-pud = <0>;
> - samsung,pin-drv = <0>;
> - };
> -
> - power_key_irq: power-key-irq {
> - samsung,pins = "gpx1-3";
> - samsung,pin-function = <0xf>;
> - samsung,pin-pud = <0>;
> - samsung,pin-drv = <0>;
> - };
> -
> - ec_irq: ec-irq {
> - samsung,pins = "gpx1-6";
> - samsung,pin-function = <0>;
> - samsung,pin-pud = <0>;
> - samsung,pin-drv = <0>;
> - };
> -
> max98095_en: max98095-en {
> samsung,pins = "gpx1-7";
> samsung,pin-function = <0>;
> samsung,pin-pud = <3>;
> samsung,pin-drv = <0>;
> };
> -
> - tps65090_irq: tps65090-irq {
> - samsung,pins = "gpx2-6";
> - samsung,pin-function = <0>;
> - samsung,pin-pud = <0>;
> - samsung,pin-drv = <0>;
> - };
> -
> - usb3_vbus_en: usb3-vbus-en {
> - samsung,pins = "gpx2-7";
> - samsung,pin-function = <1>;
> - samsung,pin-pud = <0>;
> - samsung,pin-drv = <0>;
> - };
> -
> - max77686_irq: max77686-irq {
> - samsung,pins = "gpx3-2";
> - samsung,pin-function = <0>;
> - samsung,pin-pud = <0>;
> - samsung,pin-drv = <0>;
> - };
> -
> - lid_irq: lid-irq {
> - samsung,pins = "gpx3-5";
> - samsung,pin-function = <0xf>;
> - samsung,pin-pud = <0>;
> - samsung,pin-drv = <0>;
> - };
> -
> - hdmi_hpd_irq: hdmi-hpd-irq {
> - samsung,pins = "gpx3-7";
> - samsung,pin-function = <0>;
> - samsung,pin-pud = <1>;
> - samsung,pin-drv = <0>;
> - };
> };
> -
> -&pinctrl_1 {
> - arb_their_claim: arb-their-claim {
> - samsung,pins = "gpe0-4";
> - samsung,pin-function = <0>;
> - samsung,pin-pud = <3>;
> - samsung,pin-drv = <0>;
> - };
> -
> - arb_our_claim: arb-our-claim {
> - samsung,pins = "gpf0-3";
> - samsung,pin-function = <1>;
> - samsung,pin-pud = <0>;
> - samsung,pin-drv = <0>;
> - };
> -};
> -
> -&rtc {
> - status = "okay";
> - clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
> - clock-names = "rtc", "rtc_src";
> -};
> -
> -&sd3_bus4 {
> - samsung,pin-drv = <0>;
> -};
> -
> -&sd3_clk {
> - samsung,pin-drv = <0>;
> -};
> -
> -&sd3_cmd {
> - samsung,pin-pud = <3>;
> - samsung,pin-drv = <0>;
> -};
> -
> -&spi_1 {
> - status = "okay";
> - samsung,spi-src-clk = <0>;
> - num-cs = <1>;
> - cs-gpios = <&gpa2 5 GPIO_ACTIVE_HIGH>;
> -};
> -
> -&usbdrd_dwc3 {
> - dr_mode = "host";
> -};
> -
> -&usbdrd_phy {
> - vbus-supply = <&usb3_vbus_reg>;
> -};
> -
> -#include "cros-ec-keyboard.dtsi"
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
