Added support for vmmc/vqmmc-supply for emmc/sd cards.
Fixed the min values for regulator ldo13_reg (VDDQ_MMC2).
Added ramp-delay for LDO9(VDD33_USB3_0).
Added ramp-delay for LDO13(VDDQ_MMC2).
Added ramp-delay for LDO15(ETH_P3V3).

Signed-off-by: Anand Moon <linux.am...@gmail.com>

---
Changes based on 
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung.git 
v4.4-next/dt-samsung branch

Note:
Changes need for support of UHS-I highspeed cards.
changes for vqmmc-supply for emmc is not supported.

[    1.831136] vdd_ldo9: ramp_delay not set
[    1.843049] vdd_ldo13: ramp_delay not set
[    1.850975] vdd_ldo15: ramp_delay not set
[    1.862816] vdd_sd: ramp_delay not set
---
 arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi 
b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
index 26decbd..58c06d3 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
@@ -157,6 +157,7 @@
                                regulator-min-microvolt = <3000000>;
                                regulator-max-microvolt = <3000000>;
                                regulator-always-on;
+                               regulator-ramp-delay = <12000>;
                        };
 
                        ldo10_reg: LDO10 {
@@ -182,9 +183,10 @@
 
                        ldo13_reg: LDO13 {
                                regulator-name = "vdd_ldo13";
-                               regulator-min-microvolt = <2800000>;
+                               regulator-min-microvolt = <1800000>;
                                regulator-max-microvolt = <2800000>;
                                regulator-always-on;
+                               regulator-ramp-delay = <12000>;
                        };
 
                        ldo15_reg: LDO15 {
@@ -213,6 +215,7 @@
                                regulator-min-microvolt = <2800000>;
                                regulator-max-microvolt = <2800000>;
                                regulator-always-on;
+                               regulator-ramp-delay = <12000>;
                        };
 
                        ldo24_reg: LDO24 {
@@ -338,6 +341,7 @@
        samsung,dw-mshc-ddr-timing = <0 2>;
        samsung,dw-mshc-hs400-timing = <0 2>;
        samsung,read-strobe-delay = <90>;
+       vmmc-supply = <&ldo3_reg>;
        pinctrl-names = "default";
        pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_cd 
&sd0_rclk>;
        bus-width = <8>;
@@ -352,6 +356,8 @@
        samsung,dw-mshc-ciu-div = <3>;
        samsung,dw-mshc-sdr-timing = <0 4>;
        samsung,dw-mshc-ddr-timing = <0 2>;
+       vmmc-supply = <&ldo19_reg>;
+       vqmmc-supply = <&ldo13_reg>;
        cd-gpios = <&gpc2 2 GPIO_ACTIVE_HIGH>;
        cd-inverted;
        pinctrl-names = "default";
-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to