Analogix dp driver is split from exynos dp driver, so we just
make an copy of exynos_dp.txt, and then simplify exynos_dp.txt

Beside update some exynos dtsi file with the latest change
according to the devicetree binding documents.

Tested-by: Javier Martinez Canillas <jav...@osg.samsung.com>
Signed-off-by: Yakir Yang <y...@rock-chips.com>
---
Changes in v7: None
Changes in v6: None
Changes in v5: None
Changes in v4:
- Split all DTS changes, and provide backward compatibility. Mark old
  properties as deprecated but still support them. (Krzysztof)
- Update "analogix,hpd-gpio" to "hpd-gpios" prop name. (Rob)
- Deprecated some properties which could parsed from Edid/Mode/DPCD. (Thierry)
    "analogix,color-space" & "analogix,color-depth"   &
    "analogix,link-rate"   & "analogix,lane-count"    &
    "analogix,ycbcr-coeff" & "analogix,dynamic-range" &
    "vsync-active-high"    & "hsync-active-high"      & "interlaces"

Changes in v3:
- Add devicetree binding documents. (Heiko)
- Remove sync pol & colorimetry properies from the new analogix dp driver
  devicetree binding. (Thierry)
- Update the exist exynos dtsi file with the latest DP DT properies.

Changes in v2: None

 .../bindings/display/bridge/analogix_dp.txt        | 50 +++++++++++++++++
 .../bindings/display/exynos/exynos_dp.txt          | 63 ++++++++--------------
 2 files changed, 71 insertions(+), 42 deletions(-)
 create mode 100644 
Documentation/devicetree/bindings/display/bridge/analogix_dp.txt

diff --git a/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt 
b/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
new file mode 100644
index 0000000..7659a7a
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
@@ -0,0 +1,50 @@
+Analogix Display Port bridge bindings
+
+Required properties for dp-controller:
+       -compatible:
+               platform specific such as:
+                * "samsung,exynos5-dp"
+                * "rockchip,rk3288-dp"
+       -reg:
+               physical base address of the controller and length
+               of memory mapped region.
+       -interrupts:
+               interrupt combiner values.
+       -clocks:
+               from common clock binding: handle to dp clock.
+       -clock-names:
+               from common clock binding: Shall be "dp".
+       -interrupt-parent:
+               phandle to Interrupt combiner node.
+       -phys:
+               from general PHY binding: the phandle for the PHY device.
+       -phy-names:
+               from general PHY binding: Should be "dp".
+
+Optional properties for dp-controller:
+       -hpd-gpios:
+               Hotplug detect GPIO.
+               Indicates which GPIO should be used for hotplug detection
+       -port@[X]: SoC specific port nodes with endpoint definitions as defined
+               in Documentation/devicetree/bindings/media/video-interfaces.txt,
+               please refer to the SoC specific binding document:
+               * Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
+               * 
Documentation/devicetree/bindings/video/analogix_dp-rockchip.txt
+
+
+[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
+-------------------------------------------------------------------------------
+
+Example:
+
+       dp-controller {
+               compatible = "samsung,exynos5-dp";
+               reg = <0x145b0000 0x10000>;
+               interrupts = <10 3>;
+               interrupt-parent = <&combiner>;
+               clocks = <&clock 342>;
+               clock-names = "dp";
+
+               phys = <&dp_phy>;
+               phy-names = "dp";
+       };
diff --git a/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt 
b/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
index 7a3a9cd..9e47357 100644
--- a/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
+++ b/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
@@ -31,45 +31,31 @@ Required properties for dp-controller:
                from general PHY binding: the phandle for the PHY device.
        -phy-names:
                from general PHY binding: Should be "dp".
-       -samsung,color-space:
-               input video data format.
-                       COLOR_RGB = 0, COLOR_YCBCR422 = 1, COLOR_YCBCR444 = 2
-       -samsung,dynamic-range:
-               dynamic range for input video data.
-                       VESA = 0, CEA = 1
-       -samsung,ycbcr-coeff:
-               YCbCr co-efficients for input video.
-                       COLOR_YCBCR601 = 0, COLOR_YCBCR709 = 1
-       -samsung,color-depth:
-               number of bits per colour component.
-                       COLOR_6 = 0, COLOR_8 = 1, COLOR_10 = 2, COLOR_12 = 3
-       -samsung,link-rate:
-               link rate supported by the panel.
-                       LINK_RATE_1_62GBPS = 0x6, LINK_RATE_2_70GBPS = 0x0A
-       -samsung,lane-count:
-               number of lanes supported by the panel.
-                       LANE_COUNT1 = 1, LANE_COUNT2 = 2, LANE_COUNT4 = 4
+
+Optional properties for dp-controller:
        - display-timings: timings for the connected panel as described by
                Documentation/devicetree/bindings/video/display-timing.txt
 
-Optional properties for dp-controller:
-       -interlaced:
-               interlace scan mode.
-                       Progressive if defined, Interlaced if not defined
-       -vsync-active-high:
-               VSYNC polarity configuration.
-                       High if defined, Low if not defined
-       -hsync-active-high:
-               HSYNC polarity configuration.
-                       High if defined, Low if not defined
-       -samsung,hpd-gpio:
-               Hotplug detect GPIO.
-                       Indicates which GPIO should be used for hotplug
-                       detection
-       -video interfaces: Device node can contain video interface port
-                           nodes according to [1].
+For the below properties, please refer to Analogix DP binding document:
+ * Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
+       -phys (required)
+       -phy-names (required)
+       -hpd-gpios (optional)
+       -video interfaces (optional)
 
-[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
+Deprecated properties for DisplayPort:
+-interlaced:            deprecated prop that can parsed frm drm_display_mode.
+-vsync-active-high:     deprecated prop that can parsed frm drm_display_mode.
+-hsync-active-high:     deprecated prop that can parsed frm drm_display_mode.
+-samsung,ycbcr-coeff:   deprecated prop that can parsed frm drm_display_mode.
+-samsung,dynamic-range: deprecated prop that can parsed frm drm_display_mode.
+-samsung,color-space:   deprecated prop that can parsed from drm_display_info.
+-samsung,color-depth:   deprecated prop that can parsed from drm_display_info.
+-samsung,link-rate:     deprecated prop that can reading from monitor by dpcd 
method.
+-samsung,lane-count:    deprecated prop that can reading from monitor by dpcd 
method.
+-samsung,hpd-gpio:      deprecated name for hpd-gpios.
+
+-------------------------------------------------------------------------------
 
 Example:
 
@@ -88,13 +74,6 @@ SOC specific portion:
 
 Board Specific portion:
        dp-controller {
-               samsung,color-space = <0>;
-               samsung,dynamic-range = <0>;
-               samsung,ycbcr-coeff = <0>;
-               samsung,color-depth = <1>;
-               samsung,link-rate = <0x0a>;
-               samsung,lane-count = <4>;
-
                display-timings {
                        native-mode = <&lcd_timing>;
                        lcd_timing: 1366x768 {
-- 
2.1.2


--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to