2015-11-02 19:04 GMT+09:00 Alim Akhtar <alim.akh...@samsung.com>: > This patch add pmic (s2mps15) node of espresso board,
This patch adds PMIC (S2MPS15)... > which includes addition of regulators and pmic-clk sub-nodes. > > Signed-off-by: Abhilash Kesavan <a.kesa...@samsung.com> > Signed-off-by: Alim Akhtar <alim.akh...@samsung.com> > --- > This patch should go in after driver side changes [1] lands. > [1]-> > https://www.mail-archive.com/linux-samsung-soc@vger.kernel.org/msg47736.html Eh? Why? Usually there is not such requirement. > > arch/arm64/boot/dts/exynos/exynos7-espresso.dts | 349 > +++++++++++++++++++++++ > 1 file changed, 349 insertions(+) > > diff --git a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts > b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts > index 838a3626dac1..8ce04a0ec928 100644 > --- a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts > +++ b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts > @@ -53,6 +53,355 @@ > status = "okay"; > }; > > +&hsi2c_4 { > + samsung,i2c-sda-delay = <100>; > + samsung,i2c-max-bus-freq = <200000>; > + status = "okay"; > + > + s2mps15_pmic@66 { > + compatible = "samsung,s2mps15-pmic"; > + reg = <0x66>; > + interrupts = <2 0>; > + interrupt-parent = <&gpa0>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pmic_irq>; > + wakeup-source; > + > + s2mps15_osc: clocks { > + compatible = "samsung,s2mps13-clk"; > + #clock-cells = <1>; > + clock-output-names = "s2mps13_ap", "s2mps13_cp", > + "s2mps13_bt"; > + }; Don't you want to use one of these clocks for s3c-rtc (&rtc node)? > + > + regulators { > + ldo1_reg: LDO1 { > + regulator-name = "vdd_ldo1"; > + regulator-min-microvolt = <500000>; > + regulator-max-microvolt = <900000>; > + regulator-always-on; > + regulator-enable-ramp-delay = <125>; > + }; > + > + ldo2_reg: LDO2 { > + regulator-name = "vdd_ldo2"; > + regulator-min-microvolt = <1620000>; > + regulator-max-microvolt = <3300000>; > + regulator-enable-ramp-delay = <125>; > + regulator-always-on; > + }; > + > + ldo3_reg: LDO3 { > + regulator-name = "vdd_ldo3"; > + regulator-min-microvolt = <1620000>; > + regulator-max-microvolt = <1980000>; > + regulator-always-on; > + regulator-boot-on; > + regulator-enable-ramp-delay = <125>; > + }; > + > + ldo4_reg: LDO4 { > + regulator-name = "vdd_ldo4"; > + regulator-min-microvolt = <800000>; > + regulator-max-microvolt = <1110000>; > + regulator-always-on; > + regulator-enable-ramp-delay = <125>; > + }; > + > + ldo5_reg: LDO5 { > + regulator-name = "vdd_ldo5"; > + regulator-min-microvolt = <1620000>; > + regulator-max-microvolt = <1980000>; > + regulator-always-on; > + regulator-enable-ramp-delay = <125>; > + }; > + > + ldo6_reg: LDO6 { > + regulator-name = "vdd_ldo6"; > + regulator-min-microvolt = <2250000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + regulator-boot-on; > + regulator-enable-ramp-delay = <125>; > + }; > + > + ldo7_reg: LDO7 { > + regulator-name = "vdd_ldo7"; > + regulator-min-microvolt = <700000>; > + regulator-max-microvolt = <1150000>; > + regulator-always-on; > + regulator-enable-ramp-delay = <125>; > + }; > + > + ldo8_reg: LDO8 { > + regulator-name = "vdd_ldo8"; > + regulator-min-microvolt = <700000>; > + regulator-max-microvolt = <1000000>; > + regulator-always-on; > + regulator-enable-ramp-delay = <125>; > + }; > + > + ldo9_reg: LDO9 { > + regulator-name = "vdd_ldo9"; > + regulator-min-microvolt = <700000>; > + regulator-max-microvolt = <1000000>; > + regulator-always-on; > + regulator-enable-ramp-delay = <125>; > + }; > + > + ldo10_reg: LDO10 { > + regulator-name = "vdd_ldo10"; > + regulator-min-microvolt = <700000>; > + regulator-max-microvolt = <1000000>; > + regulator-always-on; > + regulator-enable-ramp-delay = <125>; > + }; > + > + ldo11_reg: LDO11 { > + regulator-name = "vdd_ldo11"; > + regulator-min-microvolt = <1000000>; > + regulator-max-microvolt = <1300000>; > + regulator-always-on; > + regulator-enable-ramp-delay = <125>; > + }; > + > + ldo12_reg: LDO12 { > + regulator-name = "vdd_ldo12"; > + regulator-min-microvolt = <1000000>; > + regulator-max-microvolt = <1300000>; > + regulator-always-on; > + regulator-enable-ramp-delay = <125>; > + }; > + > + ldo13_reg: LDO13 { > + regulator-name = "vdd_ldo13"; > + regulator-min-microvolt = <1000000>; > + regulator-max-microvolt = <1300000>; > + regulator-always-on; > + regulator-enable-ramp-delay = <125>; > + }; > + > + ldo14_reg: LDO14 { > + regulator-name = "vdd_ldo14"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3375000>; > + regulator-always-on; > + regulator-enable-ramp-delay = <125>; > + }; > + > + ldo15_reg: LDO15 { > + regulator-name = "vdd_ldo15"; > + regulator-min-microvolt = <1500000>; > + regulator-max-microvolt = <2275000>; > + regulator-always-on; > + regulator-enable-ramp-delay = <125>; > + }; > + > + ldo16_reg: LDO16 { > + regulator-name = "vdd_ldo16"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + regulator-enable-ramp-delay = <125>; > + }; > + > + ldo17_reg: LDO17 { > + regulator-name = "vdd_ldo17"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3375000>; > + regulator-always-on; > + regulator-enable-ramp-delay = <125>; > + }; > + > + ldo18_reg: LDO18 { > + regulator-name = "vdd_ldo18"; > + regulator-min-microvolt = <1500000>; > + regulator-max-microvolt = <2275000>; > + regulator-always-on; > + regulator-enable-ramp-delay = <125>; > + }; > + > + ldo19_reg: LDO19 { > + regulator-name = "vdd_ldo19"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3375000>; > + regulator-always-on; > + regulator-enable-ramp-delay = <125>; > + }; > + > + ldo20_reg: LDO20 { > + regulator-name = "vdd_ldo20"; > + regulator-min-microvolt = <1500000>; > + regulator-max-microvolt = <2275000>; > + regulator-always-on; > + regulator-enable-ramp-delay = <125>; > + }; > + > + ldo21_reg: LDO21 { > + regulator-name = "vdd_ldo21"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3375000>; > + regulator-always-on; > + regulator-enable-ramp-delay = <125>; > + }; > + > + ldo22_reg: LDO22 { > + regulator-name = "vdd_ldo22"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-always-on; > + regulator-enable-ramp-delay = <125>; > + }; > + > + ldo23_reg: LDO23 { > + regulator-name = "vdd_ldo23"; > + regulator-min-microvolt = <1500000>; > + regulator-max-microvolt = <2275000>; > + regulator-always-on; > + regulator-enable-ramp-delay = <125>; > + }; > + > + ldo24_reg: LDO24 { > + regulator-name = "vdd_ldo24"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3375000>; > + regulator-always-on; > + regulator-enable-ramp-delay = <125>; > + }; > + > + ldo25_reg: LDO25 { > + regulator-name = "vdd_ldo25"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3375000>; > + regulator-always-on; > + regulator-enable-ramp-delay = <125>; > + }; > + > + ldo26_reg: LDO26 { > + regulator-name = "vdd_ldo26"; > + regulator-min-microvolt = <700000>; > + regulator-max-microvolt = <1470000>; > + regulator-always-on; > + regulator-enable-ramp-delay = <125>; > + }; > + > + ldo27_reg: LDO27 { > + regulator-name = "vdd_ldo27"; > + regulator-min-microvolt = <1500000>; > + regulator-max-microvolt = <2275000>; > + regulator-always-on; > + regulator-enable-ramp-delay = <125>; > + }; > + > + buck1_reg: BUCK1 { > + regulator-name = "vdd_mif"; > + regulator-min-microvolt = <500000>; > + regulator-max-microvolt = <1200000>; > + regulator-always-on; > + regulator-boot-on; > + regulator-ramp-delay = <25000>; > + regulator-enable-ramp-delay = <250>; > + }; > + > + buck2_reg: BUCK2 { > + regulator-name = "vdd_atlas"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-always-on; > + regulator-boot-on; > + regulator-ramp-delay = <12500>; > + regulator-enable-ramp-delay = <250>; > + }; > + > + buck3_reg: BUCK3 { > + regulator-name = "vdd_apollo"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-always-on; > + regulator-boot-on; > + regulator-ramp-delay = <12500>; > + regulator-enable-ramp-delay = <250>; > + }; > + > + buck4_reg: BUCK4 { > + regulator-name = "vdd_int"; > + regulator-min-microvolt = <500000>; > + regulator-max-microvolt = <1200000>; > + regulator-always-on; > + regulator-boot-on; > + regulator-ramp-delay = <12500>; > + regulator-enable-ramp-delay = <250>; > + }; > + > + buck5_reg: BUCK5 { > + regulator-name = "vdd_buck5"; > + regulator-min-microvolt = <500000>; > + regulator-max-microvolt = <1300000>; > + regulator-always-on; > + regulator-ramp-delay = <25000>; > + regulator-enable-ramp-delay = <250>; > + }; > + > + buck6_reg: BUCK6 { > + regulator-name = "vdd_g3d"; > + regulator-min-microvolt = <500000>; > + regulator-max-microvolt = <1400000>; > + regulator-always-on; > + regulator-ramp-delay = <12500>; > + regulator-enable-ramp-delay = <250>; > + }; > + > + buck7_reg: BUCK7 { > + regulator-name = "vdd_buck7"; > + regulator-min-microvolt = <1000000>; > + regulator-max-microvolt = <1500000>; > + regulator-always-on; > + regulator-boot-on; > + regulator-ramp-delay = <25000>; > + regulator-enable-ramp-delay = <250>; > + }; > + > + buck8_reg: BUCK8 { > + regulator-name = "vdd_buck8"; > + regulator-min-microvolt = <1000000>; > + regulator-max-microvolt = <1500000>; > + regulator-always-on; > + regulator-boot-on; > + regulator-ramp-delay = <25000>; > + regulator-enable-ramp-delay = <250>; > + }; > + > + buck9_reg: BUCK9 { > + regulator-name = "vdd_buck9"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <2100000>; > + regulator-always-on; > + regulator-boot-on; > + regulator-ramp-delay = <25000>; > + regulator-enable-ramp-delay = <250>; > + }; > + > + buck10_reg: BUCK10 { > + regulator-name = "vdd_buck10"; > + regulator-min-microvolt = <1000000>; > + regulator-max-microvolt = <3000000>; > + regulator-boot-on; > + regulator-always-on; > + regulator-ramp-delay = <25000>; > + regulator-enable-ramp-delay = <250>; > + }; All of these ldo3 and bucks in vendor tree for Espresso board have ramp delay of 12000. Also they don't have enable-ramp-delay set and voltages sometimes differ. I don't have S2MPS15 datasheet so I don't know what is the true value... I'll leave it up to you but it looks suspicious. > + }; > + }; > +}; What will be the benefit of defining all of these regulators if they are always on and without consumers? No one will disable them, no one will change the voltage. Please provide some consumers. Best regards, Krzysztof -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
