On Wednesday, February 23, 2005 11:35 AM, Andrew wrote: > well, i installed SLES 8 and the system found its PERC 2/dc > as an i2o block device. > it loads all i2o_core, i2o_block, i2o_config, and i2o_pci > > and at i2o_pci it says to wait for more devices in the background....
I2O mode is not for general use. You should set the mode to 'mass storage' device from the ctrl-m configuration utility. > i used to try the following modules: (rpm packages) > megaraid-megamgr-1.07-5 > megaraid2-2.10.1-3dkms Once you install above packages, reboot the system and you will see the driver loaded. Thanks, Seokmann LSI Logic Corporation. > -----Original Message----- > From: Mrvka Andreas [mailto:[EMAIL PROTECTED] > Sent: Wednesday, February 23, 2005 11:35 AM > To: Ju, Seokmann; [email protected] > Subject: Re: installing new MegaRaid driver on Suse Enterprise Server 8 > > Hello! > > Thanks for your response! > > well, i installed SLES 8 and the system found its PERC 2/dc > as an i2o block device. > it loads all i2o_core, i2o_block, i2o_config, and i2o_pci > > and at i2o_pci it says to wait for more devices in the background.... > but it does get an timeout back. > so i believe the i2o module is not that correct one. > > i used to try the following modules: (rpm packages) > megaraid-megamgr-1.07-5 > megaraid2-2.10.1-3dkms > > can you guide me through updating to actual megaraid version? > well, i believe that this is what i have to try next. > cause, there is no kernel update for SLES 8 available :-( > > thanks, > andrew > > > Am Mittwoch, 23. Februar 2005 16:57 schrieb Ju, Seokmann: > > On Wednesday, February 23, 2005 9:47 AM, Mrvka wrote: > > > > Please let me know what version of driver you are using. > > Also, Is O/S installed on the device connected to megaraid controller? > > > > Thanks, > > > > > -----Original Message----- > > > From: Mrvka Andreas [mailto:[EMAIL PROTECTED] > > > Sent: Wednesday, February 23, 2005 9:47 AM > > > To: [email protected] > > > Subject: installing new MegaRaid driver on Suse Enterprise Server 8 > > > > > > hi list, > > > > > > does anybody can help to guide me through an update > > > of an megaraid driver? > > > > > > i have a Dell Perc 2/dc controller in my Dell 2450 Server and > > > SuSE Server 8. > > > > > > if i use the standard megaraid driver, then the server crashes > > > and stands... (no error log entry) > > > > > > i found many sites for updates but no instruction for that. > > > > > > can anybody please support me? > > > > > > thanks in advance! > > > > > > cheers > > > Andrew > > > > > > - > > > To unsubscribe from this list: send the line "unsubscribe linux-scsi" > in > > > the body of a message to [EMAIL PROTECTED] > > > More majordomo info at http://vger.kernel.org/majordomo-info.html > > > > - To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
