A nit on the use of "must".... In the following:
> /** > - * scsi_add_host - perform sysfs registration and SCSI bus scan. > + * scsi_add_host - perform sysfs registration and set up > transport class > * @shost: pointer to scsi host instance > * @dev: pointer to struct device of type scsi class > * > @@ -453,7 +455,10 @@ struct scsi_device * scsi_add_device(str > * Might block: no > * > * Notes: Only required in "hotplug initialization > model" after a > - * successful call to scsi_host_alloc(). > + * successful call to scsi_host_alloc(). The LLD must call > + * scsi_scan_host() in order to scan the bus. The LLD must set up > + * the transport template before calling this function and may only > + * access the transport class data after this function has > been called. > * > * Defined in: drivers/scsi/hosts.c > It is not mandatory that the LLD call scsi_scan_host(). Although this used to be the case, a few changes have been made in the midlayer recently as we attempted to have the transports perform scanning on behalf of the LLD's. The scsi_scan_target() function can now be used instead of scsi_scan_host(). (note: the symbol scsi_scan_single_target() was added briefly, then removed as scsi_scan_target was exported). In the case of the LLD's using the FC transport, the need not call any scan function. The FC transport calls scsi_scan_target() for them. -- james - To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
