[EMAIL PROTECTED] wrote: > Aravind Parchuri wrote: > >> My log messages were getting all mixed up, so I cleaned up my little >> test to send just one command at a time. It actually looks like the mid >> layer passes the command through to open-iscsi with the right size the >> first time, but then it sends a second command with request_bufflen = 0. >> >> I can verify that the command completed on the target just like the >> regular ones did, so there should be no reason for a retry of any sort. >> >> Here's the log for a 32896 byte command: >> Mar 9 11:27:43 ITX000c292c3c8d kernel: sg_open: dev=0, flags=0x802 >> Mar 8 11:27:43 ITX000c292c3c8d kernel: sg_add_sfp: sfp=0xcbadc000 >> Mar 8 11:27:43 ITX000c292c3c8d kernel: sg_build_reserve: req_size=32768 >> Mar 8 11:27:43 ITX000c292c3c8d kernel: sg_build_indirect: >> buff_size=32768, blk_size=32768 >> Mar 8 11:27:43 ITX000c292c3c8d kernel: sg_add_sfp: bufflen=32768, >> k_use_sg=1 >> Mar 8 11:27:43 ITX000c292c3c8d kernel: sg_ioctl: sg0, cmd=0x2285 >> Mar 8 11:27:43 ITX000c292c3c8d kernel: sg_common_write: scsi >> opcode=0x3b, cmd_size=10 >> Mar 8 11:27:43 ITX000c292c3c8d kernel: sg_start_req: dxfer_len=32896 >> Mar 8 11:27:43 ITX000c292c3c8d kernel: sg_build_indirect: >> buff_size=32896, blk_size=33280 >> Mar 8 11:27:43 ITX000c292c3c8d kernel: sg_write_xfer: num_xfer=32896, >> iovec_count=0, k_use_sg=2 >> Mar 8 11:27:43 ITX000c292c3c8d kernel: iscsi_queuecommand: opcode 3b >> request_bufflen 32896 transfersize 32896 >> > > Did you add your own output? Could you enable iscsi debugging? What > kernel is this with and what versions of open-iscsi (upstream or svn or > tarball release)? > No custom output, all of this is from scsi (SCSI_LOG_TIMEOUT=5) and open-iscsi (DEBUG_SCSI enabled). I thought I mentioned this in an earlier mail - the kernel is 2.6.19, but the open-iscsi drivers and utils are from the 2.0-754 tarball.
I'm not sure what other debugging to enable in open-iscsi. Are you talking about DEBUG_TCP or iscsid's debug? If you think it'll help, I can enable them and try again. Has anyone tried to reproduce this behavior independently though, maybe with a dummy LLD of some sort? Aravind. - To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
