On Thu, 2007-07-19 at 16:31 +0200, Gabriel C wrote:
> No is not an SATA controller.
>
> sda and sdb are SCSI disks connected to an Adaptec AIC-7892P U160/m
> controller using the aic7xxx driver.
OK, this definitely works for me, that's what my root disk is on. I
think this isn't a kernel problem ... I think it's a udev name clash
problem. Try the attached patch, which corrects the names:
> sdc is an ATA-7 disk connected to an IDE controller ( 82801BA IDE U100
> ) using libata and the ata_piix driver.
James
---
Index: BUILD-2.6/block/Kconfig
===================================================================
--- BUILD-2.6.orig/block/Kconfig 2007-07-18 11:34:20.000000000 -0500
+++ BUILD-2.6/block/Kconfig 2007-07-18 11:36:24.000000000 -0500
@@ -53,7 +53,7 @@ endif # BLOCK
config BLK_DEV_BSG
bool "Block layer SG support v4 (EXPERIMENTAL)"
- depends on (SCSI=y) && EXPERIMENTAL
+ depends on EXPERIMENTAL
---help---
Saying Y here will enable generic SG (SCSI generic) v4 support
for any block device.
Index: BUILD-2.6/block/bsg.c
===================================================================
--- BUILD-2.6.orig/block/bsg.c 2007-07-18 11:34:20.000000000 -0500
+++ BUILD-2.6/block/bsg.c 2007-07-18 11:36:24.000000000 -0500
@@ -1009,29 +1009,6 @@ err:
}
EXPORT_SYMBOL_GPL(bsg_register_queue);
-static int bsg_add(struct class_device *cl_dev, struct class_interface
*cl_intf)
-{
- int ret;
- struct scsi_device *sdp = to_scsi_device(cl_dev->dev);
- struct request_queue *rq = sdp->request_queue;
-
- if (rq->kobj.parent)
- ret = bsg_register_queue(rq, kobject_name(rq->kobj.parent));
- else
- ret = bsg_register_queue(rq,
kobject_name(&sdp->sdev_gendev.kobj));
- return ret;
-}
-
-static void bsg_remove(struct class_device *cl_dev, struct class_interface
*cl_intf)
-{
- bsg_unregister_queue(to_scsi_device(cl_dev->dev)->request_queue);
-}
-
-static struct class_interface bsg_intf = {
- .add = bsg_add,
- .remove = bsg_remove,
-};
-
static struct cdev bsg_cdev = {
.kobj = {.name = "bsg", },
.owner = THIS_MODULE,
@@ -1069,16 +1046,9 @@ static int __init bsg_init(void)
if (ret)
goto unregister_chrdev;
- ret = scsi_register_interface(&bsg_intf);
- if (ret)
- goto remove_cdev;
-
printk(KERN_INFO BSG_DESCRIPTION " version " BSG_VERSION
" loaded (major %d)\n", bsg_major);
return 0;
-remove_cdev:
- printk(KERN_ERR "bsg: failed register scsi interface %d\n", ret);
- cdev_del(&bsg_cdev);
unregister_chrdev:
unregister_chrdev_region(MKDEV(bsg_major, 0), BSG_MAX_DEVS);
destroy_bsg_class:
Index: BUILD-2.6/drivers/scsi/scsi_sysfs.c
===================================================================
--- BUILD-2.6.orig/drivers/scsi/scsi_sysfs.c 2007-07-18 11:36:02.000000000
-0500
+++ BUILD-2.6/drivers/scsi/scsi_sysfs.c 2007-07-19 10:10:50.000000000 -0500
@@ -715,6 +715,7 @@ static int attr_add(struct device *dev,
int scsi_sysfs_add_sdev(struct scsi_device *sdev)
{
int error, i;
+ struct request_queue *rq = sdev->request_queue;
if ((error = scsi_device_set_state(sdev, SDEV_RUNNING)) != 0)
return error;
@@ -734,6 +735,17 @@ int scsi_sysfs_add_sdev(struct scsi_devi
/* take a reference for the sdev_classdev; this is
* released by the sdev_class .release */
get_device(&sdev->sdev_gendev);
+
+ error = bsg_register_queue(rq, sdev->sdev_gendev.bus_id);
+
+ if (error)
+ sdev_printk(KERN_INFO, sdev,
+ "Failed to register bsg queue, errno=%d\n", error);
+
+ /* we're treating error on bsg register as non-fatal, so pretend
+ * nothing went wrong */
+ error = 0;
+
if (sdev->host->hostt->sdev_attrs) {
for (i = 0; sdev->host->hostt->sdev_attrs[i]; i++) {
error = attr_add(&sdev->sdev_gendev,
@@ -780,6 +792,7 @@ void __scsi_remove_device(struct scsi_de
if (scsi_device_set_state(sdev, SDEV_CANCEL) != 0)
return;
+ bsg_unregister_queue(sdev->request_queue);
class_device_unregister(&sdev->sdev_classdev);
transport_remove_device(dev);
device_del(dev);
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
