On Tuesday, January 15, 2008 1:37 PM, Andrew Morton wrote: > > On blade startup we're seeing the following message: > > > > Fusion MPT base driver 3.02.55 > > Copyright (c) 1999-2005 LSI Logic Corporation > > Fusion MPT SAS Host driver 3.02.55 > > mptbase: Initiating ioc0 bringup > > mptbase: ioc0: WARNING - IOC is in FAULT state!!! > > FAULT code = 1804h > > mptbase: ioc0: ERROR - Failed to come READY after reset! IocState=0 > > mptbase: ioc0 NOT READY WARNING! > > mptbase: WARNING - ioc0 did not initialize properly! (-1) > > mptsas: probe of 0000:05:01.0 failed with error -1 > >
What is happening is while the driver loading, the controller is in FAULT_STATE, and we are unable to recover. The FAULT_CODE = (0x1804) = IFAULT_IOP_SELFTEST_FAILED_TIMER, means "Timer Failure". I suggest this customer try contacting LSI support channels. More than likely a firmware upgrade might fix this issue. I really doubt its a driver issue. The channel support email id is [EMAIL PROTECTED] There maybe a Notrel Product Marketing account manager, but I'm not for sure. Eric - To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
