[PATCH 1/1] aacraid: pci_set_dma_max_seg_size opened up for late model controllers

[Salyzyn, Mark]

This patch depends on 'RE: [patch 048/265] iommu sg merging: aacraid: use 
pci_set_dma_max_seg_size' and ensures that the modern adapters get a maximum sg 
segment size on par with the maximum transfer size. Added some localized 
janitor fixes to the discussion patch I used with Fujita.

FUJITA Tomonori [mailto:[EMAIL PROTECTED] sez:
> I think that setting the proper maximum segment size for the late
> model cards (as you did above) makes sense.

This attached patch is against current linux-2.6. It will not apply to current 
scsi-misc-2.6 without the above mentioned dependency.

ObligatoryDisclaimer: Please accept my condolences regarding Outlook's handling 
of patch attachments. Please use the attached file to patch

Signed-off-by: Mark Salyzyn <[EMAIL PROTECTED]>

 drivers/scsi/aacraid/linit.c |   28 +++++++++++++---------------
 1 file changed, 13 insertions(+), 15 deletions(-)

diff -ru a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
--- a/drivers/scsi/aacraid/linit.c      2008-02-06 11:35:55.111631591 -0500
+++ b/drivers/scsi/aacraid/linit.c      2008-02-06 11:52:11.095208736 -0500
@@ -1130,31 +1130,29 @@
        if (error < 0)
                goto out_deinit;

-       if (!(aac->adapter_info.options & AAC_OPT_NEW_COMM)) {
-               error = pci_set_dma_max_seg_size(pdev, 65536);
-               if (error)
-                       goto out_deinit;
-       }
-
        /*
         * Lets override negotiations and drop the maximum SG limit to 34
         */
        if ((aac_drivers[index].quirks & AAC_QUIRK_34SG) &&
-                       (aac->scsi_host_ptr->sg_tablesize > 34)) {
-               aac->scsi_host_ptr->sg_tablesize = 34;
-               aac->scsi_host_ptr->max_sectors
-                 = (aac->scsi_host_ptr->sg_tablesize * 8) + 112;
+                       (shost->sg_tablesize > 34)) {
+               shost->sg_tablesize = 34;
+               shost->max_sectors = (shost->sg_tablesize * 8) + 112;
        }

        if ((aac_drivers[index].quirks & AAC_QUIRK_17SG) &&
-                       (aac->scsi_host_ptr->sg_tablesize > 17)) {
-               aac->scsi_host_ptr->sg_tablesize = 17;
-               aac->scsi_host_ptr->max_sectors
-                 = (aac->scsi_host_ptr->sg_tablesize * 8) + 112;
+                       (shost->sg_tablesize > 17)) {
+               shost->sg_tablesize = 17;
+               shost->max_sectors = (shost->sg_tablesize * 8) + 112;
        }

+       error = pci_set_dma_max_seg_size(pdev,
+               (aac->adapter_info.options & AAC_OPT_NEW_COMM) ?
+                       (shost->max_sectors << 9) : 65536);
+       if (error)
+               goto out_deinit;
+
        /*
-        * Firware printf works only with older firmware.
+        * Firmware printf works only with older firmware.
         */
        if (aac_drivers[index].quirks & AAC_QUIRK_34SG)
                aac->printf_enabled = 1;

aacraid_pci_set_dma.patch
Description: aacraid_pci_set_dma.patch