(Adding Cc: LSML) Jarod Wilson wrote: > On Wednesday 06 February 2008 04:09:47 pm Stefan Richter wrote: >> take care that __scsi_add_device does not return success >> even though the SCSI high-level driver probing failed (sd READ_CAPACITY >> and friends) due to bus reset. The trick to do so is to use a different >> error indicator in the command completion as long as __scsi_add_device >> did not return.
Or so did I guess, and... >> An actual failure of __scsi_add_device is easy to handle, but an >> incomplete execution of __scsi_add_device with an sdev returned would >> remain undetected and leave the SBP-2 target unusable. >> >> Signed-off-by: Stefan Richter <[EMAIL PROTECTED]> >> --- >> >> Jarod, does this work like I assume and fixes your setup of two OXFW911 >> based disks? > > Well, it results in the dmesg spew saying "sd 6:0:0:0: [sdc] Result: > hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK" -- i.e., > DID_NO_CONNECT instead of DID_BUS_BUSY, but other than that, no change in > behavior, sdc remains unusable just as before. ...my guess was wrong then. Either I misunderstood the semantics of the various hostbyte codes in the command completion return (and then these semantics are insufficient) --- or SCSI mid layer or high-level implements them wrong. But before we dive into the SCSI stack or implement parellelism of SBP-2 reconnect and SCSI probing in fw-sbp2, there is another simple and in hindsight obvious trick we can try. Stay tuned. Background for LSML: In case of unrecoverable transport failures during the execution of __scsi_add_device, I would like to send appropriate error indicators from the LLD up to SCSI midlayer so that __scsi_add_device ends in failure (i.e. returns an error pointer rather than a scsi_device pointer). Sometimes SCSI core decides to let __scsi_add_device fail, sometimes it takes the scsi_device offline, sometimes it doesn't do either but pretends to the LLD that __scsi_add_device was an utter success. Except that userspace can't do anything with the scsi_device because e.g. READ CAPACITY couldn't be executed. -- Stefan Richter -=====-==--- --=- -=--- http://arcgraph.de/sr/ - To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html