Il 25/07/2012 17:09, Paolo Bonzini ha scritto:
> Il 25/07/2012 16:36, Boaz Harrosh ha scritto:
>>>>
>>>> I did test the patch with value-assignment.
>>>>
>>
>> Still you should use the sg_set_page()!!
>> 1. It is not allowed to directly manipulate sg entries. One should always
>> use the proper accessor. Even if open coding does work and is not a bug
>> it should not be used anyway!
>> 2. Future code that will support chaining will need to do as I say so why
>> change it then, again?
>
> Future code that will support chaining will not copy anything at all.
>
> Also, and more important, note that I am _not_ calling sg_init_table
> before the loop, only once in the driver initialization. That's because
> memset in sg_init_table is an absolute performance killer, especially if
> you have to do it in a critical section; and I'm not making this up, see
> blk_rq_map_sg:
>
> * If the driver previously mapped a shorter
> * list, we could see a termination bit
> * prematurely unless it fully inits the sg
> * table on each mapping. We KNOW that there
> * must be more entries here or the driver
> * would be buggy, so force clear the
> * termination bit to avoid doing a full
> * sg_init_table() in drivers for each command.
> */
> sg->page_link &= ~0x02;
> sg = sg_next(sg);
>
> So let's instead fix the API so that I (and blk-merge.c) can touch
> memory just once. For example you could add __sg_set_page and
> __sg_set_buf, basically the equivalent of
>
> memset(sg, 0, sizeof(*sg));
> sg_set_{page,buf}(sg, page, len, offset);
>
> Calling these functions would be fine if you later add a manual call to
> sg_mark_end, again the same as blk-merge.c does. See the attached
> untested/uncompiled patch.
>
> And value assignment would be the same as a
>
> __sg_set_page(sg, sg_page(page), sg->length, sg->offset);
ENOPATCH...
diff --git a/block/blk-merge.c b/block/blk-merge.c
index 160035f..00ba3d4 100644
--- a/block/blk-merge.c
+++ b/block/blk-merge.c
@@ -146,7 +146,9 @@ int blk_rq_map_sg(struct request_queue *q, struct request
*rq,
new_segment:
if (!sg)
sg = sglist;
- else {
+ else
+ sg = sg_next(sg);
+
/*
* If the driver previously mapped a shorter
* list, we could see a termination bit
@@ -158,11 +160,7 @@ new_segment:
* termination bit to avoid doing a full
* sg_init_table() in drivers for each command.
*/
- sg->page_link &= ~0x02;
- sg = sg_next(sg);
- }
-
- sg_set_page(sg, bvec->bv_page, nbytes, bvec->bv_offset);
+ __sg_set_page(sg, bvec->bv_page, nbytes,
bvec->bv_offset);
nsegs++;
}
bvprv = bvec;
@@ -182,12 +180,11 @@ new_segment:
if (rq->cmd_flags & REQ_WRITE)
memset(q->dma_drain_buffer, 0, q->dma_drain_size);
- sg->page_link &= ~0x02;
sg = sg_next(sg);
- sg_set_page(sg, virt_to_page(q->dma_drain_buffer),
- q->dma_drain_size,
- ((unsigned long)q->dma_drain_buffer) &
- (PAGE_SIZE - 1));
+ __sg_set_page(sg, virt_to_page(q->dma_drain_buffer),
+ q->dma_drain_size,
+ ((unsigned long)q->dma_drain_buffer) &
+ (PAGE_SIZE - 1));
nsegs++;
rq->extra_len += q->dma_drain_size;
}
diff --git a/include/linux/scatterlist.h b/include/linux/scatterlist.h
index ac9586d..d6a937e 100644
--- a/include/linux/scatterlist.h
+++ b/include/linux/scatterlist.h
@@ -44,32 +44,23 @@ struct sg_table {
#define sg_chain_ptr(sg) \
((struct scatterlist *) ((sg)->page_link & ~0x03))
-/**
- * sg_assign_page - Assign a given page to an SG entry
- * @sg: SG entry
- * @page: The page
- *
- * Description:
- * Assign page to sg entry. Also see sg_set_page(), the most commonly used
- * variant.
- *
- **/
-static inline void sg_assign_page(struct scatterlist *sg, struct page *page)
+static inline void __sg_set_page(struct scatterlist *sg, struct page *page,
+ unsigned int len, unsigned int offset)
{
- unsigned long page_link = sg->page_link & 0x3;
-
/*
* In order for the low bit stealing approach to work, pages
* must be aligned at a 32-bit boundary as a minimum.
*/
BUG_ON((unsigned long) page & 0x03);
#ifdef CONFIG_DEBUG_SG
- BUG_ON(sg->sg_magic != SG_MAGIC);
- BUG_ON(sg_is_chain(sg));
+ sg->sg_magic = SG_MAGIC;
#endif
- sg->page_link = page_link | (unsigned long) page;
+ sg->page_link = page;
+ sg->offset = offset;
+ sg->length = len;
}
+
/**
* sg_set_page - Set sg entry to point at given page
* @sg: SG entry
@@ -87,9 +78,13 @@ static inline void sg_assign_page(struct scatterlist *sg,
struct page *page)
static inline void sg_set_page(struct scatterlist *sg, struct page *page,
unsigned int len, unsigned int offset)
{
- sg_assign_page(sg, page);
- sg->offset = offset;
- sg->length = len;
+ unsigned long flags = sg->page_link & 0x3;
+#ifdef CONFIG_DEBUG_SG
+ BUG_ON(sg->sg_magic != SG_MAGIC);
+ BUG_ON(sg_is_chain(sg));
+#endif
+ __sg_set_page(sg, page, len, offset);
+ sg->page_link |= flags;
}
static inline struct page *sg_page(struct scatterlist *sg)
@@ -101,6 +96,12 @@ static inline struct page *sg_page(struct scatterlist *sg)
return (struct page *)((sg)->page_link & ~0x3);
}
+static inline void __sg_set_buf(struct scatterlist *sg, const void *buf,
+ unsigned int buflen)
+{
+ __sg_set_page(sg, virt_to_page(buf), buflen, offset_in_page(buf));
+}
+
/**
* sg_set_buf - Set sg entry to point at given data
* @sg: SG entry
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
