From: Vinayak Holikatti <vinholika...@gmail.com> This patch separates PCI code from ufshcd.c and makes it as a core driver module and adds a new file ufshcd-pci.c as PCI glue driver.
Reviewed-by: Arnd Bergmann <a...@arndb.de> Reviewed-by: Namjae Jeon <linkinj...@gmail.com> Reviewed-by: Subhash Jadavani <subha...@codeaurora.org> Signed-off-by: Vinayak Holikatti <vinholika...@gmail.com> Signed-off-by: Santosh Yaraganavi <santos...@gmail.com> --- drivers/scsi/ufs/Kconfig | 26 +++- drivers/scsi/ufs/Makefile | 1 + drivers/scsi/ufs/ufshcd-pci.c | 211 ++++++++++++++++++++++++++ drivers/scsi/ufs/ufshcd.c | 328 +---------------------------------------- drivers/scsi/ufs/ufshcd.h | 202 +++++++++++++++++++++++++ 5 files changed, 440 insertions(+), 328 deletions(-) create mode 100644 drivers/scsi/ufs/ufshcd-pci.c create mode 100644 drivers/scsi/ufs/ufshcd.h diff --git a/drivers/scsi/ufs/Kconfig b/drivers/scsi/ufs/Kconfig index 8ee40df..0371047 100644 --- a/drivers/scsi/ufs/Kconfig +++ b/drivers/scsi/ufs/Kconfig @@ -33,7 +33,27 @@ # this program. config SCSI_UFSHCD - tristate "Universal Flash Storage host controller driver" - depends on PCI && SCSI + tristate "Universal Flash Storage Controller Driver Core" + depends on SCSI ---help--- - This is a generic driver which supports PCIe UFS Host controllers. + This selects the support for UFS devices in Linux, say Y and make + sure that you know the name of your UFS host adapter (the card + inside your computer that "speaks" the UFS protocol, also + called UFS Host Controller), because you will be asked for it. + The module will be called ufshcd. + + To compile this driver as a module, choose M here and read + <file:Documentation/scsi/ufs.txt>. + However, do not compile this as a module if your root file system + (the one containing the directory /) is located on a UFS device. + +config SCSI_UFSHCD_PCI + tristate "PCI bus based UFS Controller support" + depends on SCSI_UFSHCD && PCI + ---help--- + This selects the PCI UFS Host Controller Interface. Select this if + you have UFS Host Controller with PCI Interface. + + If you have a controller with this interface, say Y or M here. + + If unsure, say N. diff --git a/drivers/scsi/ufs/Makefile b/drivers/scsi/ufs/Makefile index adf7895..9eda0df 100644 --- a/drivers/scsi/ufs/Makefile +++ b/drivers/scsi/ufs/Makefile @@ -1,2 +1,3 @@ # UFSHCD makefile obj-$(CONFIG_SCSI_UFSHCD) += ufshcd.o +obj-$(CONFIG_SCSI_UFSHCD_PCI) += ufshcd-pci.o diff --git a/drivers/scsi/ufs/ufshcd-pci.c b/drivers/scsi/ufs/ufshcd-pci.c new file mode 100644 index 0000000..ae30691 --- /dev/null +++ b/drivers/scsi/ufs/ufshcd-pci.c @@ -0,0 +1,211 @@ +/* + * Universal Flash Storage Host controller PCI glue driver + * + * This code is based on drivers/scsi/ufs/ufshcd-pci.c + * Copyright (C) 2011-2013 Samsung India Software Operations + * + * Authors: + * Santosh Yaraganavi <santosh...@samsung.com> + * Vinayak Holikatti <h.vina...@samsung.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * See the COPYING file in the top-level directory or visit + * <http://www.gnu.org/licenses/gpl-2.0.html> + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * This program is provided "AS IS" and "WITH ALL FAULTS" and + * without warranty of any kind. You are solely responsible for + * determining the appropriateness of using and distributing + * the program and assume all risks associated with your exercise + * of rights with respect to the program, including but not limited + * to infringement of third party rights, the risks and costs of + * program errors, damage to or loss of data, programs or equipment, + * and unavailability or interruption of operations. Under no + * circumstances will the contributor of this Program be liable for + * any damages of any kind arising from your use or distribution of + * this program. + */ + +#include "ufshcd.h" +#include <linux/pci.h> + +#ifdef CONFIG_PM +/** + * ufshcd_pci_suspend - suspend power management function + * @pdev: pointer to PCI device handle + * @state: power state + * + * Returns -ENOSYS + */ +static int ufshcd_pci_suspend(struct pci_dev *pdev, pm_message_t state) +{ + /* + * TODO: + * 1. Call ufshcd_suspend + * 2. Do bus specific power management + */ + + return -ENOSYS; +} + +/** + * ufshcd_pci_resume - resume power management function + * @pdev: pointer to PCI device handle + * + * Returns -ENOSYS + */ +static int ufshcd_pci_resume(struct pci_dev *pdev) +{ + /* + * TODO: + * 1. Call ufshcd_resume. + * 2. Do bus specific wake up + */ + + return -ENOSYS; +} +#endif /* CONFIG_PM */ + +/** + * ufshcd_pci_shutdown - main function to put the controller in reset state + * @pdev: pointer to PCI device handle + */ +static void ufshcd_pci_shutdown(struct pci_dev *pdev) +{ + ufshcd_hba_stop((struct ufs_hba *)pci_get_drvdata(pdev)); +} + +/** + * ufshcd_pci_remove - de-allocate PCI/SCSI host and host memory space + * data structure memory + * @pdev - pointer to PCI handle + */ +static void ufshcd_pci_remove(struct pci_dev *pdev) +{ + struct ufs_hba *hba = pci_get_drvdata(pdev); + + disable_irq(pdev->irq); + free_irq(pdev->irq, hba); + ufshcd_remove(hba); + pci_release_regions(pdev); + pci_set_drvdata(pdev, NULL); + pci_clear_master(pdev); + pci_disable_device(pdev); +} + +/** + * ufshcd_set_dma_mask - Set dma mask based on the controller + * addressing capability + * @pdev: PCI device structure + * + * Returns 0 for success, non-zero for failure + */ +static int ufshcd_set_dma_mask(struct pci_dev *pdev) +{ + int err; + + if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) + && !pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64))) + return 0; + err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); + if (!err) + err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)); + return err; +} + +/** + * ufshcd_pci_probe - probe routine of the driver + * @pdev: pointer to PCI device handle + * @id: PCI device id + * + * Returns 0 on success, non-zero value on failure + */ +static int __devinit +ufshcd_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) +{ + struct ufs_hba *hba; + void __iomem *mmio_base; + int err; + + err = pci_enable_device(pdev); + if (err) { + dev_err(&pdev->dev, "pci_enable_device failed\n"); + goto out_error; + } + + pci_set_master(pdev); + + + err = pci_request_regions(pdev, UFSHCD); + if (err < 0) { + dev_err(&pdev->dev, "request regions failed\n"); + goto out_disable; + } + + mmio_base = pci_ioremap_bar(pdev, 0); + if (!mmio_base) { + dev_err(&pdev->dev, "memory map failed\n"); + err = -ENOMEM; + goto out_release_regions; + } + + err = ufshcd_set_dma_mask(pdev); + if (err) { + dev_err(&pdev->dev, "set dma mask failed\n"); + goto out_iounmap; + } + + err = ufshcd_init(&pdev->dev, &hba, mmio_base, pdev->irq); + if (err) { + dev_err(&pdev->dev, "Initialization failed\n"); + goto out_iounmap; + } + + pci_set_drvdata(pdev, hba); + + return 0; + +out_iounmap: + iounmap(mmio_base); +out_release_regions: + pci_release_regions(pdev); +out_disable: + pci_clear_master(pdev); + pci_disable_device(pdev); +out_error: + return err; +} + +static DEFINE_PCI_DEVICE_TABLE(ufshcd_pci_tbl) = { + { PCI_VENDOR_ID_SAMSUNG, 0xC00C, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + { } /* terminate list */ +}; + +MODULE_DEVICE_TABLE(pci, ufshcd_pci_tbl); + +static struct pci_driver ufshcd_pci_driver = { + .name = UFSHCD, + .id_table = ufshcd_pci_tbl, + .probe = ufshcd_pci_probe, + .remove = __devexit_p(ufshcd_pci_remove), + .shutdown = ufshcd_pci_shutdown, +#ifdef CONFIG_PM + .suspend = ufshcd_pci_suspend, + .resume = ufshcd_pci_resume, +#endif +}; + +module_pci_driver(ufshcd_pci_driver); + +MODULE_AUTHOR("Santosh Yaragnavi <santosh...@samsung.com>"); +MODULE_AUTHOR("Vinayak Holikatti <h.vina...@samsung.com>"); +MODULE_DESCRIPTION("UFS host controller PCI glue driver"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(UFSHCD_DRIVER_VERSION); diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c index 9fa0b60..60fd40c 100644 --- a/drivers/scsi/ufs/ufshcd.c +++ b/drivers/scsi/ufs/ufshcd.c @@ -1,5 +1,5 @@ /* - * Universal Flash Storage Host controller driver + * Universal Flash Storage Host controller driver Core * * This code is based on drivers/scsi/ufs/ufshcd.c * Copyright (C) 2011-2013 Samsung India Software Operations @@ -33,35 +33,7 @@ * this program. */ -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/pci.h> -#include <linux/interrupt.h> -#include <linux/io.h> -#include <linux/delay.h> -#include <linux/slab.h> -#include <linux/spinlock.h> -#include <linux/workqueue.h> -#include <linux/errno.h> -#include <linux/types.h> -#include <linux/wait.h> -#include <linux/bitops.h> - -#include <asm/irq.h> -#include <asm/byteorder.h> -#include <scsi/scsi.h> -#include <scsi/scsi_cmnd.h> -#include <scsi/scsi_host.h> -#include <scsi/scsi_tcq.h> -#include <scsi/scsi_dbg.h> -#include <scsi/scsi_eh.h> - -#include "ufs.h" -#include "ufshci.h" - -#define UFSHCD "ufshcd" -#define UFSHCD_DRIVER_VERSION "0.1" +#include "ufshcd.h" enum { UFSHCD_MAX_CHANNEL = 0, @@ -92,124 +64,6 @@ enum { }; /** - * struct uic_command - UIC command structure - * @command: UIC command - * @argument1: UIC command argument 1 - * @argument2: UIC command argument 2 - * @argument3: UIC command argument 3 - * @cmd_active: Indicate if UIC command is outstanding - * @result: UIC command result - */ -struct uic_command { - u32 command; - u32 argument1; - u32 argument2; - u32 argument3; - int cmd_active; - int result; -}; - -/** - * struct ufs_hba - per adapter private structure - * @mmio_base: UFSHCI base register address - * @ucdl_base_addr: UFS Command Descriptor base address - * @utrdl_base_addr: UTP Transfer Request Descriptor base address - * @utmrdl_base_addr: UTP Task Management Descriptor base address - * @ucdl_dma_addr: UFS Command Descriptor DMA address - * @utrdl_dma_addr: UTRDL DMA address - * @utmrdl_dma_addr: UTMRDL DMA address - * @host: Scsi_Host instance of the driver - * @dev: device handle - * @lrb: local reference block - * @outstanding_tasks: Bits representing outstanding task requests - * @outstanding_reqs: Bits representing outstanding transfer requests - * @capabilities: UFS Controller Capabilities - * @nutrs: Transfer Request Queue depth supported by controller - * @nutmrs: Task Management Queue depth supported by controller - * @ufs_version: UFS Version to which controller complies - * @irq: Irq number of the controller - * @active_uic_cmd: handle of active UIC command - * @ufshcd_tm_wait_queue: wait queue for task management - * @tm_condition: condition variable for task management - * @ufshcd_state: UFSHCD states - * @int_enable_mask: Interrupt Mask Bits - * @uic_workq: Work queue for UIC completion handling - * @feh_workq: Work queue for fatal controller error handling - * @errors: HBA errors - */ -struct ufs_hba { - void __iomem *mmio_base; - - /* Virtual memory reference */ - struct utp_transfer_cmd_desc *ucdl_base_addr; - struct utp_transfer_req_desc *utrdl_base_addr; - struct utp_task_req_desc *utmrdl_base_addr; - - /* DMA memory reference */ - dma_addr_t ucdl_dma_addr; - dma_addr_t utrdl_dma_addr; - dma_addr_t utmrdl_dma_addr; - - struct Scsi_Host *host; - struct device *dev; - - struct ufshcd_lrb *lrb; - - unsigned long outstanding_tasks; - unsigned long outstanding_reqs; - - u32 capabilities; - int nutrs; - int nutmrs; - u32 ufs_version; - unsigned int irq; - - struct uic_command active_uic_cmd; - wait_queue_head_t ufshcd_tm_wait_queue; - unsigned long tm_condition; - - u32 ufshcd_state; - u32 int_enable_mask; - - /* Work Queues */ - struct work_struct uic_workq; - struct work_struct feh_workq; - - /* HBA Errors */ - u32 errors; -}; - -/** - * struct ufshcd_lrb - local reference block - * @utr_descriptor_ptr: UTRD address of the command - * @ucd_cmd_ptr: UCD address of the command - * @ucd_rsp_ptr: Response UPIU address for this command - * @ucd_prdt_ptr: PRDT address of the command - * @cmd: pointer to SCSI command - * @sense_buffer: pointer to sense buffer address of the SCSI command - * @sense_bufflen: Length of the sense buffer - * @scsi_status: SCSI status of the command - * @command_type: SCSI, UFS, Query. - * @task_tag: Task tag of the command - * @lun: LUN of the command - */ -struct ufshcd_lrb { - struct utp_transfer_req_desc *utr_descriptor_ptr; - struct utp_upiu_cmd *ucd_cmd_ptr; - struct utp_upiu_rsp *ucd_rsp_ptr; - struct ufshcd_sg_entry *ucd_prdt_ptr; - - struct scsi_cmnd *cmd; - u8 *sense_buffer; - unsigned int sense_bufflen; - int scsi_status; - - int command_type; - int task_tag; - unsigned int lun; -}; - -/** * ufshcd_get_ufs_version - Get the UFS version supported by the HBA * @hba - Pointer to adapter instance * @@ -422,15 +276,6 @@ static void ufshcd_enable_run_stop_reg(struct ufs_hba *hba) } /** - * ufshcd_hba_stop - Send controller to reset state - * @hba: per adapter instance - */ -static inline void ufshcd_hba_stop(struct ufs_hba *hba) -{ - writel(CONTROLLER_DISABLE, (hba->mmio_base + REG_CONTROLLER_ENABLE)); -} - -/** * ufshcd_hba_start - Start controller initialization sequence * @hba: per adapter instance */ @@ -1681,15 +1526,6 @@ static struct scsi_host_template ufshcd_driver_template = { }; /** - * ufshcd_pci_shutdown - main function to put the controller in reset state - * @pdev: pointer to PCI device handle - */ -static void ufshcd_pci_shutdown(struct pci_dev *pdev) -{ - ufshcd_hba_stop((struct ufs_hba *)pci_get_drvdata(pdev)); -} - -/** * ufshcd_suspend - suspend power management function * @hba: per adapter instance * @state: power state @@ -1732,43 +1568,6 @@ int ufshcd_resume(struct ufs_hba *hba) } EXPORT_SYMBOL_GPL(ufshcd_resume); -#ifdef CONFIG_PM -/** - * ufshcd_pci_suspend - suspend power management function - * @pdev: pointer to PCI device handle - * @state: power state - * - * Returns -ENOSYS - */ -static int ufshcd_pci_suspend(struct pci_dev *pdev, pm_message_t state) -{ - /* - * TODO: - * 1. Call ufshcd_suspend - * 2. Do bus specific power management - */ - - return -ENOSYS; -} - -/** - * ufshcd_pci_resume - resume power management function - * @pdev: pointer to PCI device handle - * - * Returns -ENOSYS - */ -static int ufshcd_pci_resume(struct pci_dev *pdev) -{ - /* - * TODO: - * 1. Call ufshcd_resume - * 2. Do bus specific wake up - */ - - return -ENOSYS; -} -#endif /* CONFIG_PM */ - /** * ufshcd_hba_free - free allocated memory for * host memory space data structures @@ -1799,44 +1598,6 @@ void ufshcd_remove(struct ufs_hba *hba) EXPORT_SYMBOL_GPL(ufshcd_remove); /** - * ufshcd_pci_remove - de-allocate PCI/SCSI host and host memory space - * data structure memory - * @pdev - pointer to PCI handle - */ -static void ufshcd_pci_remove(struct pci_dev *pdev) -{ - struct ufs_hba *hba = pci_get_drvdata(pdev); - - disable_irq(pdev->irq); - free_irq(pdev->irq, hba); - ufshcd_remove(hba); - pci_release_regions(pdev); - pci_set_drvdata(pdev, NULL); - pci_clear_master(pdev); - pci_disable_device(pdev); -} - -/** - * ufshcd_set_dma_mask - Set dma mask based on the controller - * addressing capability - * @pdev: PCI device structure - * - * Returns 0 for success, non-zero for failure - */ -static int ufshcd_set_dma_mask(struct pci_dev *pdev) -{ - int err; - - if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) - && !pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64))) - return 0; - err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); - if (!err) - err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)); - return err; -} - -/** * ufshcd_init - Driver initialization routine * @dev: pointer to device handle * @hba_handle: driver private handle @@ -1952,91 +1713,8 @@ out_error: } EXPORT_SYMBOL_GPL(ufshcd_init); -/** - * ufshcd_pci_probe - probe routine of the driver - * @pdev: pointer to PCI device handle - * @id: PCI device id - * - * Returns 0 on success, non-zero value on failure - */ -static int __devinit -ufshcd_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) -{ - struct ufs_hba *hba; - void __iomem *mmio_base; - int err; - - err = pci_enable_device(pdev); - if (err) { - dev_err(&pdev->dev, "pci_enable_device failed\n"); - goto out_error; - } - - pci_set_master(pdev); - - err = pci_request_regions(pdev, UFSHCD); - if (err < 0) { - dev_err(&pdev->dev, "request regions failed\n"); - goto out_disable; - } - - mmio_base = pci_ioremap_bar(pdev, 0); - if (!mmio_base) { - dev_err(&pdev->dev, "memory map failed\n"); - err = -ENOMEM; - goto out_release_regions; - } - - err = ufshcd_set_dma_mask(pdev); - if (err) { - dev_err(&pdev->dev, "set dma mask failed\n"); - goto out_iounmap; - } - - err = ufshcd_init(&pdev->dev, &hba, mmio_base, pdev->irq); - if (err) { - dev_err(&pdev->dev, "Initialization failed\n"); - goto out_iounmap; - } - - pci_set_drvdata(pdev, hba); - - return 0; - -out_iounmap: - iounmap(mmio_base); -out_release_regions: - pci_release_regions(pdev); -out_disable: - pci_clear_master(pdev); - pci_disable_device(pdev); -out_error: - return err; -} - -static DEFINE_PCI_DEVICE_TABLE(ufshcd_pci_tbl) = { - { PCI_VENDOR_ID_SAMSUNG, 0xC00C, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, - { } /* terminate list */ -}; - -MODULE_DEVICE_TABLE(pci, ufshcd_pci_tbl); - -static struct pci_driver ufshcd_pci_driver = { - .name = UFSHCD, - .id_table = ufshcd_pci_tbl, - .probe = ufshcd_pci_probe, - .remove = __devexit_p(ufshcd_pci_remove), - .shutdown = ufshcd_pci_shutdown, -#ifdef CONFIG_PM - .suspend = ufshcd_pci_suspend, - .resume = ufshcd_pci_resume, -#endif -}; - -module_pci_driver(ufshcd_pci_driver); - MODULE_AUTHOR("Santosh Yaragnavi <santosh...@samsung.com>"); MODULE_AUTHOR("Vinayak Holikatti <h.vina...@samsung.com>"); -MODULE_DESCRIPTION("Generic UFS host controller driver"); +MODULE_DESCRIPTION("Generic UFS host controller driver Core"); MODULE_LICENSE("GPL"); MODULE_VERSION(UFSHCD_DRIVER_VERSION); diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h new file mode 100644 index 0000000..6b99a42 --- /dev/null +++ b/drivers/scsi/ufs/ufshcd.h @@ -0,0 +1,202 @@ +/* + * Universal Flash Storage Host controller driver + * + * This code is based on drivers/scsi/ufs/ufshcd.h + * Copyright (C) 2011-2013 Samsung India Software Operations + * + * Authors: + * Santosh Yaraganavi <santosh...@samsung.com> + * Vinayak Holikatti <h.vina...@samsung.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * See the COPYING file in the top-level directory or visit + * <http://www.gnu.org/licenses/gpl-2.0.html> + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * This program is provided "AS IS" and "WITH ALL FAULTS" and + * without warranty of any kind. You are solely responsible for + * determining the appropriateness of using and distributing + * the program and assume all risks associated with your exercise + * of rights with respect to the program, including but not limited + * to infringement of third party rights, the risks and costs of + * program errors, damage to or loss of data, programs or equipment, + * and unavailability or interruption of operations. Under no + * circumstances will the contributor of this Program be liable for + * any damages of any kind arising from your use or distribution of + * this program. + */ + +#ifndef _UFSHCD_H +#define _UFSHCD_H + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/delay.h> +#include <linux/slab.h> +#include <linux/spinlock.h> +#include <linux/workqueue.h> +#include <linux/errno.h> +#include <linux/types.h> +#include <linux/wait.h> +#include <linux/bitops.h> +#include <linux/pm_runtime.h> +#include <linux/clk.h> + +#include <asm/irq.h> +#include <asm/byteorder.h> +#include <scsi/scsi.h> +#include <scsi/scsi_cmnd.h> +#include <scsi/scsi_host.h> +#include <scsi/scsi_tcq.h> +#include <scsi/scsi_dbg.h> +#include <scsi/scsi_eh.h> + +#include "ufs.h" +#include "ufshci.h" + +#define UFSHCD "ufshcd" +#define UFSHCD_DRIVER_VERSION "0.2" + +/** + * struct uic_command - UIC command structure + * @command: UIC command + * @argument1: UIC command argument 1 + * @argument2: UIC command argument 2 + * @argument3: UIC command argument 3 + * @cmd_active: Indicate if UIC command is outstanding + * @result: UIC command result + */ +struct uic_command { + u32 command; + u32 argument1; + u32 argument2; + u32 argument3; + int cmd_active; + int result; +}; + +/** + * struct ufshcd_lrb - local reference block + * @utr_descriptor_ptr: UTRD address of the command + * @ucd_cmd_ptr: UCD address of the command + * @ucd_rsp_ptr: Response UPIU address for this command + * @ucd_prdt_ptr: PRDT address of the command + * @cmd: pointer to SCSI command + * @sense_buffer: pointer to sense buffer address of the SCSI command + * @sense_bufflen: Length of the sense buffer + * @scsi_status: SCSI status of the command + * @command_type: SCSI, UFS, Query. + * @task_tag: Task tag of the command + * @lun: LUN of the command + */ +struct ufshcd_lrb { + struct utp_transfer_req_desc *utr_descriptor_ptr; + struct utp_upiu_cmd *ucd_cmd_ptr; + struct utp_upiu_rsp *ucd_rsp_ptr; + struct ufshcd_sg_entry *ucd_prdt_ptr; + + struct scsi_cmnd *cmd; + u8 *sense_buffer; + unsigned int sense_bufflen; + int scsi_status; + + int command_type; + int task_tag; + unsigned int lun; +}; + + +/** + * struct ufs_hba - per adapter private structure + * @mmio_base: UFSHCI base register address + * @ucdl_base_addr: UFS Command Descriptor base address + * @utrdl_base_addr: UTP Transfer Request Descriptor base address + * @utmrdl_base_addr: UTP Task Management Descriptor base address + * @ucdl_dma_addr: UFS Command Descriptor DMA address + * @utrdl_dma_addr: UTRDL DMA address + * @utmrdl_dma_addr: UTMRDL DMA address + * @host: Scsi_Host instance of the driver + * @dev: device handle + * @lrb: local reference block + * @outstanding_tasks: Bits representing outstanding task requests + * @outstanding_reqs: Bits representing outstanding transfer requests + * @capabilities: UFS Controller Capabilities + * @nutrs: Transfer Request Queue depth supported by controller + * @nutmrs: Task Management Queue depth supported by controller + * @ufs_version: UFS Version to which controller complies + * @irq: Irq number of the controller + * @active_uic_cmd: handle of active UIC command + * @ufshcd_tm_wait_queue: wait queue for task management + * @tm_condition: condition variable for task management + * @ufshcd_state: UFSHCD states + * @int_enable_mask: Interrupt Mask Bits + * @uic_workq: Work queue for UIC completion handling + * @feh_workq: Work queue for fatal controller error handling + * @errors: HBA errors + */ +struct ufs_hba { + void __iomem *mmio_base; + + /* Virtual memory reference */ + struct utp_transfer_cmd_desc *ucdl_base_addr; + struct utp_transfer_req_desc *utrdl_base_addr; + struct utp_task_req_desc *utmrdl_base_addr; + + /* DMA memory reference */ + dma_addr_t ucdl_dma_addr; + dma_addr_t utrdl_dma_addr; + dma_addr_t utmrdl_dma_addr; + + struct Scsi_Host *host; + struct device *dev; + + struct ufshcd_lrb *lrb; + + unsigned long outstanding_tasks; + unsigned long outstanding_reqs; + + u32 capabilities; + int nutrs; + int nutmrs; + u32 ufs_version; + unsigned int irq; + + struct uic_command active_uic_cmd; + wait_queue_head_t ufshcd_tm_wait_queue; + unsigned long tm_condition; + + u32 ufshcd_state; + u32 int_enable_mask; + + /* Work Queues */ + struct work_struct uic_workq; + struct work_struct feh_workq; + + /* HBA Errors */ + u32 errors; +}; + +int ufshcd_init(struct device *, struct ufs_hba ** , void __iomem * , + unsigned int); +void ufshcd_remove(struct ufs_hba *); + +/** + * ufshcd_hba_stop - Send controller to reset state + * @hba: per adapter instance + */ +static inline void ufshcd_hba_stop(struct ufs_hba *hba) +{ + writel(CONTROLLER_DISABLE, (hba->mmio_base + REG_CONTROLLER_ENABLE)); +} + +#endif /* End of Header */ -- 1.7.5.4 -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html