From: Vikas Chaudhary <vikas.chaudh...@qlogic.com>
Move "Incorrect function ID" print message in case INTX interrupt
from DEBUG2 to DEBUG7. This will avoid floods of this message if
DEBUG2 is enabled.
Signed-off-by: Vikas Chaudhary <vikas.chaudh...@qlogic.com>
---
drivers/scsi/qla4xxx/ql4_dbg.h | 7 +++++++
drivers/scsi/qla4xxx/ql4_isr.c | 8 ++++----
2 files changed, 11 insertions(+), 4 deletions(-)
diff --git a/drivers/scsi/qla4xxx/ql4_dbg.h b/drivers/scsi/qla4xxx/ql4_dbg.h
index 5b0afc1..51c365b 100644
--- a/drivers/scsi/qla4xxx/ql4_dbg.h
+++ b/drivers/scsi/qla4xxx/ql4_dbg.h
@@ -12,6 +12,7 @@
/* #define QL_DEBUG_LEVEL_3 */ /* Output function tracing */
/* #define QL_DEBUG_LEVEL_4 */
/* #define QL_DEBUG_LEVEL_5 */
+/* #define QL_DEBUG_LEVEL_7 */
/* #define QL_DEBUG_LEVEL_9 */
#define QL_DEBUG_LEVEL_2 /* ALways enable error messagess */
@@ -48,6 +49,12 @@
#define DEBUG5(x) do {} while (0);
#endif /* */
+#if defined(QL_DEBUG_LEVEL_7)
+#define DEBUG7(x) do {x; } while (0)
+#else /* */
+#define DEBUG7(x) do {} while (0)
+#endif /* */
+
#if defined(QL_DEBUG_LEVEL_9)
#define DEBUG9(x) do {x;} while (0);
#else /* */
diff --git a/drivers/scsi/qla4xxx/ql4_isr.c b/drivers/scsi/qla4xxx/ql4_isr.c
index 1b83dc2..e02a884 100644
--- a/drivers/scsi/qla4xxx/ql4_isr.c
+++ b/drivers/scsi/qla4xxx/ql4_isr.c
@@ -1099,8 +1099,8 @@ irqreturn_t qla4_82xx_intr_handler(int irq, void *dev_id)
status = qla4_82xx_rd_32(ha, ISR_INT_STATE_REG);
if (!ISR_IS_LEGACY_INTR_TRIGGERED(status)) {
- DEBUG2(ql4_printk(KERN_INFO, ha,
- "%s legacy Int not triggered\n", __func__));
+ DEBUG7(ql4_printk(KERN_INFO, ha,
+ "%s legacy Int not triggered\n", __func__));
return IRQ_NONE;
}
@@ -1158,7 +1158,7 @@ irqreturn_t qla4_83xx_intr_handler(int irq, void *dev_id)
/* Legacy interrupt is valid if bit31 of leg_int_ptr is set */
if (!(leg_int_ptr & LEG_INT_PTR_B31)) {
- DEBUG2(ql4_printk(KERN_ERR, ha,
+ DEBUG7(ql4_printk(KERN_ERR, ha,
"%s: Legacy Interrupt Bit 31 not set,
spurious interrupt!\n",
__func__));
return IRQ_NONE;
@@ -1166,7 +1166,7 @@ irqreturn_t qla4_83xx_intr_handler(int irq, void *dev_id)
/* Validate the PCIE function ID set in leg_int_ptr bits [19..16] */
if ((leg_int_ptr & PF_BITS_MASK) != ha->pf_bit) {
- DEBUG2(ql4_printk(KERN_ERR, ha,
+ DEBUG7(ql4_printk(KERN_ERR, ha,
"%s: Incorrect function ID 0x%x in legacy
interrupt register, ha->pf_bit = 0x%x\n",
__func__, (leg_int_ptr & PF_BITS_MASK),
ha->pf_bit));
--
1.8.0
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
