Infinite loop can occur if IOCStatus is not equal to
MPI2_IOCSTATUS_CONFIG_INVALID_PAGE value in the while loops in functions
_scsih_search_responding_sas_devices,
_scsih_search_responding_raid_devices and
_scsih_search_responding_expanders
So, Instead of checking for MPI2_IOCSTATUS_CONFIG_INVALID_PAGE value,
in this patch code is modified to check for IOCStatus not equals to
MPI2_IOCSTATUS_SUCCESS to break the while loop.
Signed-off-by: Sreekanth Reddy <sreekanth.re...@lsi.com>
Cc: sta...@vger.kernel.org
---
drivers/scsi/mpt3sas/mpt3sas_scsih.c | 16 ++++------------
1 files changed, 4 insertions(+), 12 deletions(-)
diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
index 9ebc9dc..632eba7 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
@@ -6406,7 +6406,7 @@ _scsih_search_responding_sas_devices(struct
MPT3SAS_ADAPTER *ioc)
handle))) {
ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
MPI2_IOCSTATUS_MASK;
- if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
+ if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
break;
handle = le16_to_cpu(sas_device_pg0.DevHandle);
device_info = le32_to_cpu(sas_device_pg0.DeviceInfo);
@@ -6508,7 +6508,7 @@ _scsih_search_responding_raid_devices(struct
MPT3SAS_ADAPTER *ioc)
&volume_pg1, MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE, handle))) {
ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
MPI2_IOCSTATUS_MASK;
- if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
+ if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
break;
handle = le16_to_cpu(volume_pg1.DevHandle);
@@ -6532,7 +6532,7 @@ _scsih_search_responding_raid_devices(struct
MPT3SAS_ADAPTER *ioc)
phys_disk_num))) {
ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
MPI2_IOCSTATUS_MASK;
- if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
+ if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
break;
phys_disk_num = pd_pg0.PhysDiskNum;
handle = le16_to_cpu(pd_pg0.DevHandle);
@@ -6611,7 +6611,7 @@ _scsih_search_responding_expanders(struct MPT3SAS_ADAPTER
*ioc)
ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
MPI2_IOCSTATUS_MASK;
- if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
+ if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
break;
handle = le16_to_cpu(expander_pg0.DevHandle);
@@ -6756,8 +6756,6 @@ _scsih_scan_for_devices_after_reset(struct
MPT3SAS_ADAPTER *ioc)
MPI2_SAS_EXPAND_PGAD_FORM_GET_NEXT_HNDL, handle))) {
ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
MPI2_IOCSTATUS_MASK;
- if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
- break;
if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
pr_info(MPT3SAS_FMT "\tbreak from expander scan: " \
"ioc_status(0x%04x), loginfo(0x%08x)\n",
@@ -6801,8 +6799,6 @@ _scsih_scan_for_devices_after_reset(struct
MPT3SAS_ADAPTER *ioc)
phys_disk_num))) {
ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
MPI2_IOCSTATUS_MASK;
- if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
- break;
if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
pr_info(MPT3SAS_FMT "\tbreak from phys disk scan: "\
"ioc_status(0x%04x), loginfo(0x%08x)\n",
@@ -6868,8 +6864,6 @@ _scsih_scan_for_devices_after_reset(struct
MPT3SAS_ADAPTER *ioc)
&volume_pg1, MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE, handle))) {
ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
MPI2_IOCSTATUS_MASK;
- if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
- break;
if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
pr_info(MPT3SAS_FMT "\tbreak from volume scan: " \
"ioc_status(0x%04x), loginfo(0x%08x)\n",
@@ -6928,8 +6922,6 @@ _scsih_scan_for_devices_after_reset(struct
MPT3SAS_ADAPTER *ioc)
handle))) {
ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
MPI2_IOCSTATUS_MASK;
- if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
- break;
if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
pr_info(MPT3SAS_FMT "\tbreak from end device scan:"\
" ioc_status(0x%04x), loginfo(0x%08x)\n",
--
1.7.3
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
