On 09/27/2013 03:34 PM, scame...@beardog.cce.hp.com wrote:
> On Fri, Sep 27, 2013 at 03:22:19PM +0200, Tomas Henzl wrote:
>> On 09/23/2013 08:34 PM, Stephen M. Cameron wrote:
>>> From: Stephen M. Cameron <scame...@beardog.cce.hp.com>
>>>
>>> SCSI mid layer doesn't seem to handle logical drives undergoing format
>>> very well. scsi_add_device on such devices seems to result in hitting
>>> those devices with a TUR at a rate of 3Hz for awhile, transitioning
>>> to hitting them with a READ(10) at a much higher rate indefinitely,
>>> and at boot time, this prevents the system from coming up. If we
>>> do not expose such devices to the kernel, it isn't bothered by them.
>> Is the result of this patch that the drive is no more visible for the user
>> and he can't follow the formatting progress?
> Yes (subsequent patch monitors the progress and brings the drive
> online when it's ready).
>
>> I think a better option is to fix the kernel to handle formatting devices
>> better
> Yeah, you're probably right. (This is what comes of writing code for all
> the distros then forward porting to kernel.org code.
> Grumble-grumble-management
> grumble-grumble real-world problems.)
>
>> or harden the hpsa so it can cope with TURs or reads (ignore) from a
>> formatting
>> device.
> I don't think hpsa driver had any problem with the TURs or READs though,
> they would be returned to the mid layer just fine (TUR returned sense data
> indicating not ready, format in progress, I forget what the reads
> returned, whatever the firmware filled in for the sense data, which
> was reasonable), but the mid-layer was relentless and just never
> really proceeded, iirc.
>
> Since we were trying to make this work on existing OSes where fixing the
> SCSI mid layer wasn't an option, we came up with this.
I'm actually glad that you care about existing OSes :)
Do you know whether the midlayer has similar problems with other drivers?
Tomas
>
>> Also maybe a cmd_special_free is missing - see below
> D'oh. Ok, now that's just embarassing. Thanks.
>
> -- steve
>
>> Cheers, Tomas
>> Signed-off-by: Stephen M. Cameron <scame...@beardog.cce.hp.com>
>> ---
>> drivers/scsi/hpsa.c | 50
>> ++++++++++++++++++++++++++++++++++++++++++++++++--
>> drivers/scsi/hpsa.h | 1 +
>> 2 files changed, 49 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
>> index b7f405f..38e3af4 100644
>> --- a/drivers/scsi/hpsa.c
>> +++ b/drivers/scsi/hpsa.c
>> @@ -1010,6 +1010,20 @@ static void adjust_hpsa_scsi_table(struct ctlr_info
>> *h, int hostno,
>> for (i = 0; i < nsds; i++) {
>> if (!sd[i]) /* if already added above. */
>> continue;
>> +
>> + /* Don't add devices which are NOT READY, FORMAT IN PROGRESS
>> + * as the SCSI mid-layer does not handle such devices well.
>> + * It relentlessly loops sending TUR at 3Hz, then READ(10)
>> + * at 160Hz, and prevents the system from coming up.
>> + */
>> + if (sd[i]->format_in_progress) {
>> + dev_info(&h->pdev->dev,
>> + "Logical drive format in progress, device
>> c%db%dt%dl%d offline.\n",
>> + h->scsi_host->host_no,
>> + sd[i]->bus, sd[i]->target, sd[i]->lun);
>> + continue;
>> + }
>> +
>> device_change = hpsa_scsi_find_entry(sd[i], h->dev,
>> h->ndevices, &entry);
>> if (device_change == DEVICE_NOT_FOUND) {
>> @@ -1715,6 +1729,34 @@ static inline void hpsa_set_bus_target_lun(struct
>> hpsa_scsi_dev_t *device,
>> device->lun = lun;
>> }
>>
>> +static unsigned char hpsa_format_in_progress(struct ctlr_info *h,
>> + unsigned char scsi3addr[])
>> +{
>> + struct CommandList *c;
>> + unsigned char *sense, sense_key, asc, ascq;
>> +#define ASC_LUN_NOT_READY 0x04
>> +#define ASCQ_LUN_NOT_READY_FORMAT_IN_PROGRESS 0x04
>> +
>> +
>> + c = cmd_special_alloc(h);
>> + if (!c)
>> + return 0;
>> + fill_cmd(c, TEST_UNIT_READY, h, NULL, 0, 0, scsi3addr, TYPE_CMD);
>> + hpsa_scsi_do_simple_cmd_core(h, c);
>> + sense = c->err_info->SenseInfo;
>> + sense_key = sense[2];
>> + asc = sense[12];
>> + ascq = sense[13];
>> + if (c->err_info->CommandStatus == CMD_TARGET_STATUS &&
>> + c->err_info->ScsiStatus == SAM_STAT_CHECK_CONDITION &&
>> + sense_key == NOT_READY &&
>> + asc == ASC_LUN_NOT_READY &&
>> + ascq == ASCQ_LUN_NOT_READY_FORMAT_IN_PROGRESS)
>> + return 1;
>> return^ without cmd_special_free
>>
>> + cmd_special_free(h, c);
>> + return 0;
>> +}
>> +
>> static int hpsa_update_device_info(struct ctlr_info *h,
>> unsigned char scsi3addr[], struct hpsa_scsi_dev_t *this_device,
>> unsigned char *is_OBDR_device)
>> @@ -1753,10 +1795,14 @@ static int hpsa_update_device_info(struct ctlr_info
>> *h,
>> sizeof(this_device->device_id));
>>
>> if (this_device->devtype == TYPE_DISK &&
>> - is_logical_dev_addr_mode(scsi3addr))
>> + is_logical_dev_addr_mode(scsi3addr)) {
>> hpsa_get_raid_level(h, scsi3addr, &this_device->raid_level);
>> - else
>> + this_device->format_in_progress =
>> + hpsa_format_in_progress(h, scsi3addr);
>> + } else {
>> this_device->raid_level = RAID_UNKNOWN;
>> + this_device->format_in_progress = 0;
>> + }
>>
>> if (is_OBDR_device) {
>> /* See if this is a One-Button-Disaster-Recovery device
>> diff --git a/drivers/scsi/hpsa.h b/drivers/scsi/hpsa.h
>> index bc85e72..4fd0d45 100644
>> --- a/drivers/scsi/hpsa.h
>> +++ b/drivers/scsi/hpsa.h
>> @@ -46,6 +46,7 @@ struct hpsa_scsi_dev_t {
>> unsigned char vendor[8]; /* bytes 8-15 of inquiry data */
>> unsigned char model[16]; /* bytes 16-31 of inquiry data */
>> unsigned char raid_level; /* from inquiry page 0xC1 */
>> + unsigned char format_in_progress;
>> };
>>
>> struct reply_pool {
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
>> the body of a message to majord...@vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
> --
> To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
> the body of a message to majord...@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
