On Wed, 2013-10-23 at 13:42 +0100, Linus Torvalds wrote:
> You need to think about *WHY* we had a "new driver" exception. And
> realize that it probably will never actually be relevant for any SCSI
> driver (not counting things like USB storage etc).
OK, point taken, here's the new pull request
----
This is a set of 2 fixes which cause oopses (Buslogic, qla2xxx) and 1
fix which may cause a hang because of request miscounting (sd).
The patch is available here:
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi.git scsi-fixes
The short changelog is:
Aaron Lu (1):
sd: call blk_pm_runtime_init before add_disk
Chad Dupuis (1):
qla2xxx: Fix request queue null dereference.
Khalid Aziz (1):
BusLogic: Fix an oops when intializing multimaster adapter
And the diffstat:
drivers/scsi/BusLogic.c | 16 ++++++++--------
drivers/scsi/qla2xxx/qla_dbg.c | 2 +-
drivers/scsi/qla2xxx/qla_isr.c | 9 +++++++++
drivers/scsi/sd.c | 2 +-
4 files changed, 19 insertions(+), 10 deletions(-)
With full diff below.
James
---
diff --git a/drivers/scsi/BusLogic.c b/drivers/scsi/BusLogic.c
index feab3a5..757eb07 100644
--- a/drivers/scsi/BusLogic.c
+++ b/drivers/scsi/BusLogic.c
@@ -696,7 +696,7 @@ static int __init blogic_init_mm_probeinfo(struct
blogic_adapter *adapter)
while ((pci_device = pci_get_device(PCI_VENDOR_ID_BUSLOGIC,
PCI_DEVICE_ID_BUSLOGIC_MULTIMASTER,
pci_device)) != NULL) {
- struct blogic_adapter *adapter = adapter;
+ struct blogic_adapter *host_adapter = adapter;
struct blogic_adapter_info adapter_info;
enum blogic_isa_ioport mod_ioaddr_req;
unsigned char bus;
@@ -744,9 +744,9 @@ static int __init blogic_init_mm_probeinfo(struct
blogic_adapter *adapter)
known and enabled, note that the particular Standard ISA I/O
Address should not be probed.
*/
- adapter->io_addr = io_addr;
- blogic_intreset(adapter);
- if (blogic_cmd(adapter, BLOGIC_INQ_PCI_INFO, NULL, 0,
+ host_adapter->io_addr = io_addr;
+ blogic_intreset(host_adapter);
+ if (blogic_cmd(host_adapter, BLOGIC_INQ_PCI_INFO, NULL, 0,
&adapter_info, sizeof(adapter_info)) ==
sizeof(adapter_info)) {
if (adapter_info.isa_port < 6)
@@ -762,7 +762,7 @@ static int __init blogic_init_mm_probeinfo(struct
blogic_adapter *adapter)
I/O Address assigned at system initialization.
*/
mod_ioaddr_req = BLOGIC_IO_DISABLE;
- blogic_cmd(adapter, BLOGIC_MOD_IOADDR, &mod_ioaddr_req,
+ blogic_cmd(host_adapter, BLOGIC_MOD_IOADDR, &mod_ioaddr_req,
sizeof(mod_ioaddr_req), NULL, 0);
/*
For the first MultiMaster Host Adapter enumerated,
@@ -779,12 +779,12 @@ static int __init blogic_init_mm_probeinfo(struct
blogic_adapter *adapter)
fetch_localram.offset = BLOGIC_AUTOSCSI_BASE + 45;
fetch_localram.count = sizeof(autoscsi_byte45);
- blogic_cmd(adapter, BLOGIC_FETCH_LOCALRAM,
+ blogic_cmd(host_adapter, BLOGIC_FETCH_LOCALRAM,
&fetch_localram, sizeof(fetch_localram),
&autoscsi_byte45,
sizeof(autoscsi_byte45));
- blogic_cmd(adapter, BLOGIC_GET_BOARD_ID, NULL, 0, &id,
- sizeof(id));
+ blogic_cmd(host_adapter, BLOGIC_GET_BOARD_ID, NULL, 0,
+ &id, sizeof(id));
if (id.fw_ver_digit1 == '5')
force_scan_order =
autoscsi_byte45.force_scan_order;
diff --git a/drivers/scsi/qla2xxx/qla_dbg.c b/drivers/scsi/qla2xxx/qla_dbg.c
index 2ef497e..ee5c183 100644
--- a/drivers/scsi/qla2xxx/qla_dbg.c
+++ b/drivers/scsi/qla2xxx/qla_dbg.c
@@ -20,7 +20,7 @@
* | Device Discovery | 0x2095 | 0x2020-0x2022, |
* | | | 0x2011-0x2012, |
* | | | 0x2016 |
- * | Queue Command and IO tracing | 0x3058 | 0x3006-0x300b |
+ * | Queue Command and IO tracing | 0x3059 | 0x3006-0x300b |
* | | | 0x3027-0x3028 |
* | | | 0x303d-0x3041 |
* | | | 0x302d,0x3033 |
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index df1b30b..ff9c86b 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -1957,6 +1957,15 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct
rsp_que *rsp, void *pkt)
que = MSW(sts->handle);
req = ha->req_q_map[que];
+ /* Check for invalid queue pointer */
+ if (req == NULL ||
+ que >= find_first_zero_bit(ha->req_qid_map, ha->max_req_queues)) {
+ ql_dbg(ql_dbg_io, vha, 0x3059,
+ "Invalid status handle (0x%x): Bad req pointer. req=%p, "
+ "que=%u.\n", sts->handle, req, que);
+ return;
+ }
+
/* Validate handle. */
if (handle < req->num_outstanding_cmds)
sp = req->outstanding_cmds[handle];
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index e62d17d..5693f6d 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -2854,6 +2854,7 @@ static void sd_probe_async(void *data, async_cookie_t
cookie)
gd->events |= DISK_EVENT_MEDIA_CHANGE;
}
+ blk_pm_runtime_init(sdp->request_queue, dev);
add_disk(gd);
if (sdkp->capacity)
sd_dif_config_host(sdkp);
@@ -2862,7 +2863,6 @@ static void sd_probe_async(void *data, async_cookie_t
cookie)
sd_printk(KERN_NOTICE, sdkp, "Attached SCSI %sdisk\n",
sdp->removable ? "removable " : "");
- blk_pm_runtime_init(sdp->request_queue, dev);
scsi_autopm_put_device(sdp);
put_device(&sdkp->dev);
}
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
