qlt_check_srr_debug() was added in v3.5. It is a stub function unless
CONFIG_QLA_TGT_DEBUG_SRR is defined. But CONFIG_QLA_TGT_DEBUG_SRR will
never be defined, because the Kconfig symbol QLA_TGT_DEBUG_SRR was never
added to the tree.
Signed-off-by: Paul Bolle <pebo...@tiscali.nl>
---
Compile tested.
Or was it intended for this to set it by hand? In that case: please drop
the CONFIG_ prefix, and, perhaps add a comment about its purpose.
drivers/scsi/qla2xxx/qla_target.c | 90 ---------------------------------------
1 file changed, 90 deletions(-)
diff --git a/drivers/scsi/qla2xxx/qla_target.c
b/drivers/scsi/qla2xxx/qla_target.c
index 0cb73074c199..9729411faf45 100644
--- a/drivers/scsi/qla2xxx/qla_target.c
+++ b/drivers/scsi/qla2xxx/qla_target.c
@@ -1747,95 +1747,6 @@ static inline int qlt_need_explicit_conf(struct
qla_hw_data *ha,
cmd->conf_compl_supported;
}
-#ifdef CONFIG_QLA_TGT_DEBUG_SRR
-/*
- * Original taken from the XFS code
- */
-static unsigned long qlt_srr_random(void)
-{
- static int Inited;
- static unsigned long RandomValue;
- static DEFINE_SPINLOCK(lock);
- /* cycles pseudo-randomly through all values between 1 and 2^31 - 2 */
- register long rv;
- register long lo;
- register long hi;
- unsigned long flags;
-
- spin_lock_irqsave(&lock, flags);
- if (!Inited) {
- RandomValue = jiffies;
- Inited = 1;
- }
- rv = RandomValue;
- hi = rv / 127773;
- lo = rv % 127773;
- rv = 16807 * lo - 2836 * hi;
- if (rv <= 0)
- rv += 2147483647;
- RandomValue = rv;
- spin_unlock_irqrestore(&lock, flags);
- return rv;
-}
-
-static void qlt_check_srr_debug(struct qla_tgt_cmd *cmd, int *xmit_type)
-{
-#if 0 /* This is not a real status packets lost, so it won't lead to SRR */
- if ((*xmit_type & QLA_TGT_XMIT_STATUS) && (qlt_srr_random() % 200)
- == 50) {
- *xmit_type &= ~QLA_TGT_XMIT_STATUS;
- ql_dbg(ql_dbg_tgt_mgt, cmd->vha, 0xf015,
- "Dropping cmd %p (tag %d) status", cmd, cmd->tag);
- }
-#endif
- /*
- * It's currently not possible to simulate SRRs for FCP_WRITE without
- * a physical link layer failure, so don't even try here..
- */
- if (cmd->dma_data_direction != DMA_FROM_DEVICE)
- return;
-
- if (qlt_has_data(cmd) && (cmd->sg_cnt > 1) &&
- ((qlt_srr_random() % 100) == 20)) {
- int i, leave = 0;
- unsigned int tot_len = 0;
-
- while (leave == 0)
- leave = qlt_srr_random() % cmd->sg_cnt;
-
- for (i = 0; i < leave; i++)
- tot_len += cmd->sg[i].length;
-
- ql_dbg(ql_dbg_tgt_mgt, cmd->vha, 0xf016,
- "Cutting cmd %p (tag %d) buffer"
- " tail to len %d, sg_cnt %d (cmd->bufflen %d,"
- " cmd->sg_cnt %d)", cmd, cmd->tag, tot_len, leave,
- cmd->bufflen, cmd->sg_cnt);
-
- cmd->bufflen = tot_len;
- cmd->sg_cnt = leave;
- }
-
- if (qlt_has_data(cmd) && ((qlt_srr_random() % 100) == 70)) {
- unsigned int offset = qlt_srr_random() % cmd->bufflen;
-
- ql_dbg(ql_dbg_tgt_mgt, cmd->vha, 0xf017,
- "Cutting cmd %p (tag %d) buffer head "
- "to offset %d (cmd->bufflen %d)", cmd, cmd->tag, offset,
- cmd->bufflen);
- if (offset == 0)
- *xmit_type &= ~QLA_TGT_XMIT_DATA;
- else if (qlt_set_data_offset(cmd, offset)) {
- ql_dbg(ql_dbg_tgt_mgt, cmd->vha, 0xf018,
- "qlt_set_data_offset() failed (tag %d)", cmd->tag);
- }
- }
-}
-#else
-static inline void qlt_check_srr_debug(struct qla_tgt_cmd *cmd, int *xmit_type)
-{}
-#endif
-
static void qlt_24xx_init_ctio_to_isp(struct ctio7_to_24xx *ctio,
struct qla_tgt_prm *prm)
{
@@ -1918,7 +1829,6 @@ int qlt_xmit_response(struct qla_tgt_cmd *cmd, int
xmit_type,
int res;
memset(&prm, 0, sizeof(prm));
- qlt_check_srr_debug(cmd, &xmit_type);
ql_dbg(ql_dbg_tgt, cmd->vha, 0xe018,
"is_send_status=%d, cmd->bufflen=%d, cmd->sg_cnt=%d, "
--
1.9.0
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
