On Sat, Aug 09, 2014 at 06:41:19PM +0200, Luis R. Rodriguez wrote: > On Wed, Jul 30, 2014 at 03:11:07PM -0700, David Miller wrote: > > From: "Luis R. Rodriguez" <mcg...@do-not-panic.com> > > Date: Mon, 28 Jul 2014 11:28:28 -0700 > > > > > Tetsuo bisected and found that commit 786235ee "kthread: make > > > kthread_create() killable" modified kthread_create() to bail as > > > soon as SIGKILL is received. This is causing some issues with > > > some drivers and at times boot. Joseph then found that failures > > > occur as the systemd-udevd process sends SIGKILL to modprobe if > > > probe on a driver takes over 30 seconds. When this happens probe > > > will fail on any driver, its why booting on some system will fail > > > if the driver happens to be a storage related driver. Some folks > > > have suggested fixing this by modifying kthread_create() to not > > > leave upon SIGKILL [3], upon review Oleg rejected this change and > > > the discussion was punted out to systemd to see if the default > > > timeout could be increased from 30 seconds to 120. The opinion of > > > the systemd maintainers is that the driver's behavior should > > > be fixed [4]. Linus seems to agree [5], however more recently even > > > networking drivers have been reported to fail on probe since just > > > writing the firmware to a device and kicking it can take easy over > > > 60 seconds [6]. Benjamim was able to trace the issues recently > > > reported on cxgb4 down to the same systemd-udevd 30 second timeout [6]. > > > > > > This is an alternative solution which enables drivers that are > > > known to take long to use deferred probe workqueue. This avoids > > > the 30 second timeout and lets us annotate drivers with long > > > init sequences. > > > > > > As drivers determine a component is not yet available and needs > > > to defer probe you'll be notified this happen upon init for each > > > device but now with a message such as: > > > > > > pci 0000:03:00.0: Driver cxgb4 requests probe deferral on init > > > > > > You should see one of these per struct device probed. > > > > It seems we're still discussing this. > > > > I think I understand all of the underlying issues, and what I'll say > > is that perhaps we should use what Greg KH requested but via a helper > > that is easy to grep for. > > > > I don't care if it's something like "module_long_probe_init()" and > > "module_long_probe_exit()", but it just needs to be some properly > > named interface which does the whole kthread or whatever bit. > > I've tested the alternative kthread_run() proposal but unfortunately it > does not help resolve the issue, the timeout is still hit and a SIGKILL > still kills the driver probe. Please let me know how you'd all like us > to proceed, these defer probe patches do help cure the issue though.
Why doesn't it work? Doesn't modprobe come right back and the init sequence still takes a while to run? What exactly fails? thanks, greg k-h -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html