Added driver module parameter max_msix_vectors. Using this module parameter the maximum number of MSI-X vectors could be set.
The number of MSI-X vectors used would be the minimum of MSI-X vectors supported by the HBA, the number of CPU cores and the value set to max_msix_vectors module parameters. Signed-off-by: Sreekanth Reddy <sreekanth.re...@avagotech.com> Reviewed-by: Martin K. Petersen <martin.peter...@oracle.com> --- drivers/scsi/mpt2sas/mpt2sas_base.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c index 2f262be..982703a 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_base.c +++ b/drivers/scsi/mpt2sas/mpt2sas_base.c @@ -80,6 +80,10 @@ static int msix_disable = -1; module_param(msix_disable, int, 0); MODULE_PARM_DESC(msix_disable, " disable msix routed interrupts (default=0)"); +static int max_msix_vectors = -1; +module_param(max_msix_vectors, int, 0); +MODULE_PARM_DESC(max_msix_vectors, " max msix vectors "); + static int mpt2sas_fwfault_debug; MODULE_PARM_DESC(mpt2sas_fwfault_debug, " enable detection of firmware fault " "and halt firmware - (default=0)"); @@ -1402,6 +1406,16 @@ _base_enable_msix(struct MPT2SAS_ADAPTER *ioc) ioc->reply_queue_count = min_t(int, ioc->cpu_count, ioc->msix_vector_count); + if (max_msix_vectors > 0) { + ioc->reply_queue_count = min_t(int, max_msix_vectors, + ioc->reply_queue_count); + ioc->msix_vector_count = ioc->reply_queue_count; + } + + printk(MPT2SAS_INFO_FMT + "MSI-X vectors supported: %d, no of cores: %d, max_msix_vectors: %d\n", + ioc->name, ioc->msix_vector_count, ioc->cpu_count, max_msix_vectors); + entries = kcalloc(ioc->reply_queue_count, sizeof(struct msix_entry), GFP_KERNEL); if (!entries) { -- 2.0.2 -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html