From: Chad Dupuis <chad.dup...@qlogic.com>
Parse the retry delay timer field from the FCP response data and if:
- It is not zero
- The SCSI status is busy or queue full
return SCSI_MLQUEUE_TARGET_BUSY for the number of milliseconds specified
in the retry delay timer field.
Signed-off-by: Chad Dupuis <chad.dup...@qlogic.com>
Signed-off-by: Saurav Kashyap <saurav.kash...@qlogic.com>
---
drivers/scsi/qla2xxx/qla_def.h | 2 ++
drivers/scsi/qla2xxx/qla_fw.h | 2 +-
drivers/scsi/qla2xxx/qla_inline.h | 8 ++++++++
drivers/scsi/qla2xxx/qla_isr.c | 12 ++++++++++++
drivers/scsi/qla2xxx/qla_os.c | 9 +++++++++
5 files changed, 32 insertions(+), 1 deletions(-)
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index 62c902c..03da3eb 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -2023,6 +2023,8 @@ typedef struct fc_port {
unsigned long last_ramp_up;
uint16_t port_id;
+
+ unsigned long retry_delay_timestamp;
} fc_port_t;
#include "qla_mr.h"
diff --git a/drivers/scsi/qla2xxx/qla_fw.h b/drivers/scsi/qla2xxx/qla_fw.h
index 7f2e1c7..42bb357 100644
--- a/drivers/scsi/qla2xxx/qla_fw.h
+++ b/drivers/scsi/qla2xxx/qla_fw.h
@@ -567,7 +567,7 @@ struct sts_entry_24xx {
#define SF_TRANSFERRED_DATA BIT_11
#define SF_FCP_RSP_DMA BIT_0
- uint16_t reserved_2;
+ uint16_t retry_delay;
uint16_t scsi_status; /* SCSI status. */
#define SS_CONFIRMATION_REQ BIT_12
diff --git a/drivers/scsi/qla2xxx/qla_inline.h
b/drivers/scsi/qla2xxx/qla_inline.h
index b3b1d6f..fee9eb7 100644
--- a/drivers/scsi/qla2xxx/qla_inline.h
+++ b/drivers/scsi/qla2xxx/qla_inline.h
@@ -279,3 +279,11 @@ qla2x00_handle_mbx_completion(struct qla_hw_data *ha, int
status)
complete(&ha->mbx_intr_comp);
}
}
+
+static inline void
+qla2x00_set_retry_delay_timestamp(fc_port_t *fcport, uint16_t retry_delay)
+{
+ if (retry_delay)
+ fcport->retry_delay_timestamp = jiffies +
+ (retry_delay * HZ / 10);
+}
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index 6627fd5..d67fcaa 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -1983,6 +1983,7 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que
*rsp, void *pkt)
int logit = 1;
int res = 0;
uint16_t state_flags = 0;
+ uint16_t retry_delay = 0;
sts = (sts_entry_t *) pkt;
sts24 = (struct sts_entry_24xx *) pkt;
@@ -2076,6 +2077,9 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que
*rsp, void *pkt)
host_to_fcp_swap(sts24->data, sizeof(sts24->data));
ox_id = le16_to_cpu(sts24->ox_id);
par_sense_len = sizeof(sts24->data);
+ /* Valid values of the retry delay timer are 0x1-0xffef */
+ if (sts24->retry_delay > 0 && sts24->retry_delay < 0xfff1)
+ retry_delay = sts24->retry_delay;
} else {
if (scsi_status & SS_SENSE_LEN_VALID)
sense_len = le16_to_cpu(sts->req_sense_length);
@@ -2110,6 +2114,14 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct
rsp_que *rsp, void *pkt)
comp_status = CS_DATA_OVERRUN;
/*
+ * Check retry_delay_timer value if we receive a busy or
+ * queue full.
+ */
+ if (lscsi_status == SAM_STAT_TASK_SET_FULL ||
+ lscsi_status == SAM_STAT_BUSY)
+ qla2x00_set_retry_delay_timestamp(fcport, retry_delay);
+
+ /*
* Based on Host and scsi status generate status code for Linux
*/
switch (comp_status) {
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index bf78127..08c8e9c 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -730,6 +730,15 @@ qla2xxx_queuecommand(struct Scsi_Host *host, struct
scsi_cmnd *cmd)
goto qc24_target_busy;
}
+ /*
+ * Return target busy if we've received a non-zero retry_delay_timer
+ * in a FCP_RSP.
+ */
+ if (time_after(jiffies, fcport->retry_delay_timestamp))
+ fcport->retry_delay_timestamp = 0;
+ else
+ goto qc24_target_busy;
+
sp = qla2x00_get_sp(vha, fcport, GFP_ATOMIC);
if (!sp)
goto qc24_host_busy;
--
1.7.7
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
