From: Joe Carnuccio <joe.carnuc...@qlogic.com>
Add support for the FA-WWN (fabric assigned wwn) fabric switch feature.
(Fabric Assigned World Wide Port Name)
Signed-off-by: Joe Carnuccio <joe.carnuc...@qlogic.com>
Signed-off-by: Saurav Kashyap <saurav.kash...@qlogic.com>
---
drivers/scsi/qla2xxx/qla_dbg.c | 7 ++-----
drivers/scsi/qla2xxx/qla_fw.h | 2 +-
drivers/scsi/qla2xxx/qla_mbx.c | 36 +++++++++++++++++++++++++++++++++++-
3 files changed, 38 insertions(+), 7 deletions(-)
diff --git a/drivers/scsi/qla2xxx/qla_dbg.c b/drivers/scsi/qla2xxx/qla_dbg.c
index 28442d0..b33eec0 100644
--- a/drivers/scsi/qla2xxx/qla_dbg.c
+++ b/drivers/scsi/qla2xxx/qla_dbg.c
@@ -15,11 +15,8 @@
* | | | 0x0144,0x0146 |
* | | | 0x015b-0x0160 |
* | | | 0x016e-0x0170 |
- * | Mailbox commands | 0x118d | 0x1018-0x1019 |
- * | | | 0x10ca |
- * | | | 0x1115-0x1116 |
- * | | | 0x111a-0x111b |
- * | | | 0x1155-0x1158 |
+ * | Mailbox commands | 0x118d | 0x1115-0x1116 |
+ * | | | 0x111a-0x111b |
* | Device Discovery | 0x2016 | 0x2020-0x2022, |
* | | | 0x2011-0x2012, |
* | | | 0x2099-0x20a4 |
diff --git a/drivers/scsi/qla2xxx/qla_fw.h b/drivers/scsi/qla2xxx/qla_fw.h
index c7d1c45..e8669aa 100644
--- a/drivers/scsi/qla2xxx/qla_fw.h
+++ b/drivers/scsi/qla2xxx/qla_fw.h
@@ -317,7 +317,7 @@ struct init_cb_24xx {
* BIT 3 = Reserved
* BIT 4 = Enable Target Mode
* BIT 5 = Disable Initiator Mode
- * BIT 6 = Reserved
+ * BIT 6 = Acquire FA-WWN
* BIT 7 = Reserved
*
* BIT 8 = Reserved
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index ca7f4f0..2de901b 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -1085,6 +1085,8 @@ qla2x00_get_adapter_id(scsi_qla_host_t *vha, uint16_t
*id, uint8_t *al_pa,
mcp->in_mb = MBX_9|MBX_7|MBX_6|MBX_3|MBX_2|MBX_1|MBX_0;
if (IS_CNA_CAPABLE(vha->hw))
mcp->in_mb |= MBX_13|MBX_12|MBX_11|MBX_10;
+ if (IS_FWI2_CAPABLE(vha->hw))
+ mcp->in_mb |= MBX_19|MBX_18|MBX_17|MBX_16;
mcp->tov = MBX_TOV_SECONDS;
mcp->flags = 0;
rval = qla2x00_mailbox_command(vha, mcp);
@@ -1118,6 +1120,22 @@ qla2x00_get_adapter_id(scsi_qla_host_t *vha, uint16_t
*id, uint8_t *al_pa,
vha->fcoe_vn_port_mac[1] = mcp->mb[13] >> 8;
vha->fcoe_vn_port_mac[0] = mcp->mb[13] & 0xff;
}
+ /* If FA-WWN supported */
+ if (mcp->mb[7] & BIT_14) {
+ vha->port_name[0] = MSB(mcp->mb[16]);
+ vha->port_name[1] = LSB(mcp->mb[16]);
+ vha->port_name[2] = MSB(mcp->mb[17]);
+ vha->port_name[3] = LSB(mcp->mb[17]);
+ vha->port_name[4] = MSB(mcp->mb[18]);
+ vha->port_name[5] = LSB(mcp->mb[18]);
+ vha->port_name[6] = MSB(mcp->mb[19]);
+ vha->port_name[7] = LSB(mcp->mb[19]);
+ fc_host_port_name(vha->host) =
+ wwn_to_u64(vha->port_name);
+ ql_dbg(ql_dbg_mbx, vha, 0x10ca,
+ "FA-WWN acquired %016llx\n",
+ wwn_to_u64(vha->port_name));
+ }
}
return rval;
@@ -3328,8 +3346,24 @@ qla24xx_report_id_acquisition(scsi_qla_host_t *vha,
rptid_entry->port_id[2], rptid_entry->port_id[1],
rptid_entry->port_id[0]);
+ /* FA-WWN is only for physical port */
+ if (!vp_idx) {
+ void *wwpn = ha->init_cb->port_name;
+
+ if (!MSB(stat)) {
+ if (rptid_entry->vp_idx_map[1] & BIT_6)
+ wwpn = rptid_entry->reserved_4 + 8;
+ }
+ memcpy(vha->port_name, wwpn, WWN_SIZE);
+ fc_host_port_name(vha->host) =
+ wwn_to_u64(vha->port_name);
+ ql_dbg(ql_dbg_mbx, vha, 0x1018,
+ "FA-WWN portname %016llx (%x)\n",
+ fc_host_port_name(vha->host), MSB(stat));
+ }
+
vp = vha;
- if (vp_idx == 0 && (MSB(stat) != 1))
+ if (vp_idx == 0)
goto reg_needed;
if (MSB(stat) != 0 && MSB(stat) != 2) {
--
1.7.7
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
