On 04/16/2015 03:46 PM, Don Brace wrote: > From: Webb Scales <web...@hp.com> > > We had a mix of formats used for specifying controller, bus, target, > and lun address of devices. > > change to the format used by the scsi midlayer and upper layer (2:3:0:0) > so you can easily follow the information from hpsa to scsi midlayer > to sd upper layer. > > Also add this information: > - product ID > - vendor ID > - RAID level > - SSD Smath Path capable and enabled > - exposure level (sg-only) > > Example: > hpsa 0000:04:00.0: added scsi 2:0:0:0: Direct-Access HP LOGICAL VOLUME > RAID-0 SSDSmartPathCap+ En+ Exp=4 > scsi 2:0:0:0: Direct-Access HP LOGICAL VOLUME 10.0 PQ: 0 ANSI: 5 > sd 2:0:0:0: [sdr] 12501713072 512-byte logical blocks: (6.40 TB/5.82 TiB) > sd 2:0:0:0: [sdr] 4096-byte physical blocks > sd 2:0:0:0: [sdr] Attached SCSI disk > sd 2:0:0:0: Attached scsi generic sg20 type 0 > > Reviewed-by: Scott Teel <scott.t...@pmcs.com> > Reviewed-by: Kevin Barnett <kevin.barn...@pmcs.com> > Signed-off-by: Robert Elliott <elli...@hp.com> > Signed-off-by: Don Brace <don.br...@pmcs.com>
Reviewed-by: Tomas Henzl <the...@redhat.com> Tomas -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
