These patches are based on Linus's tree
The changes are:
- corrected issue with dev_printk
- add driver requested rescans
- stop rescans on memory allocation failures and
skip over unresponsive devices
- correct 0 byte READ(6)/WRITE(6) transfers
- correct issues when looking at CISS_REPORT_PHYS data
- correct mapping of ioaccel2 chain blocks
- make hpsa_get_device_id more generic
- add more information to messages
- simplify device exposure checks
- simplify hpsa_update_scsi_device
- add function is_logical_device
- simplify hpsa_figure_bus_target_lun
- split out scsi_add_device scsi_remove_device calls
- add in sas transport class for HBA devices
- add in physical target resets
- eliminate fake lun0 enclosures
- add polling for PT RAID devices
- disable report lu data caching
Changes from initial upload:
- changed hpsa_scsi_dev_t.devtype to unsigned
- changed driver initiated rescan messages
- changed atomic_t to int from ctlr_info.reset_in_progress
- added hpsa-stop-zeroing-reset-cmds-out-during-rescan
- added hpsa-remove-unused-function
- added hpsa-fix-multiple-issues-in-path_info_show
---
Don Brace (13):
hpsa: stop zeroing reset_cmds_out and ioaccel_cmds_out during rescan
hpsa: remove unused hpsa_tag_discard_error_bits
hpsa: check for null arguments to dev_printk
hpsa: fix null device issues
hpsa: allow driver requested rescans
hpsa: abandon rescans on memory alloaction failures.
hpsa: correct transfer length for 6 byte read/write commands
hpsa: fix hpsa_adjust_hpsa_scsi_table
hpsa: correct check for non-disk devices
hpsa: correct ioaccel2 sg chain len
hpsa: enhance hpsa_get_device_id
hpsa: enhance device messages
hpsa: bump the driver version
Kevin Barnett (6):
hpsa: simplify check for device exposure
hpsa: simplify update scsi devices
hpsa: add function is_logical_device
hpsa: refactor hpsa_figure_bus_target_lun
hpsa: move scsi_add_device and scsi_remove_device calls to new function
hpsa: add in sas transport class
Rasmus Villemoes (1):
hpsa: fix multiple issues in path_info_show
Scott Teel (5):
hpsa: fix physical target reset
External array LUNs must use target and lun numbers assigned by the
hpsa: eliminate fake lun0 enclosures
hpsa: add discovery polling for PT RAID devices.
hpsa: disable report lun data caching
drivers/block/cciss.h | 1
drivers/scsi/hpsa.c | 1289 ++++++++++++++++++++++++++++++++++++++---------
drivers/scsi/hpsa.h | 47 +-
drivers/scsi/hpsa_cmd.h | 30 +
4 files changed, 1118 insertions(+), 249 deletions(-)
--
Signature
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
