From: John Garry <john.ga...@huawei.com> Signed-off-by: John Garry <john.ga...@huawei.com> --- drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 171 +++++++++++++++++++++++++++++++++ 1 file changed, 171 insertions(+)
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c index 1990d65..a7b83bd 100644 --- a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c +++ b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c @@ -256,6 +256,11 @@ struct hisi_sas_complete_v2_hdr { __le32 dw3; }; +enum { + HISI_SAS_PHY_PHY_UPDOWN, + HISI_SAS_PHY_INT_NR +}; + #define HISI_SAS_COMMAND_ENTRIES_V2_HW 4096 static u32 hisi_sas_read32(struct hisi_hba *hisi_hba, u32 off) @@ -610,6 +615,167 @@ static void phys_init_v2_hw(struct hisi_hba *hisi_hba) mod_timer(timer, jiffies + HZ); } +static void sl_notify_v2_hw(struct hisi_hba *hisi_hba, int phy_no) +{ + u32 sl_control; + + sl_control = hisi_sas_phy_read32(hisi_hba, phy_no, SL_CONTROL); + sl_control |= SL_CONTROL_NOTIFY_EN_MSK; + hisi_sas_phy_write32(hisi_hba, phy_no, SL_CONTROL, sl_control); + msleep(1); + sl_control = hisi_sas_phy_read32(hisi_hba, phy_no, SL_CONTROL); + sl_control &= ~SL_CONTROL_NOTIFY_EN_MSK; + hisi_sas_phy_write32(hisi_hba, phy_no, SL_CONTROL, sl_control); +} + +static int phy_up_v2_hw(int phy_no, struct hisi_hba *hisi_hba) +{ + int i, res = 0; + u32 context, port_id, link_rate, hard_phy_linkrate; + struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no]; + struct asd_sas_phy *sas_phy = &phy->sas_phy; + struct device *dev = &hisi_hba->pdev->dev; + u32 *frame_rcvd = (u32 *)sas_phy->frame_rcvd; + struct sas_identify_frame *id = (struct sas_identify_frame *)frame_rcvd; + + hisi_sas_phy_write32(hisi_hba, phy_no, PHYCTRL_PHY_ENA_MSK, 1); + + /* Check for SATA dev */ + context = hisi_sas_read32(hisi_hba, PHY_CONTEXT); + if (context & (1 << phy_no)) + goto end; + + if (phy_no == 8) { + u32 port_state = hisi_sas_read32(hisi_hba, PORT_STATE); + + port_id = (port_state & PORT_STATE_PHY8_PORT_NUM_MSK) >> + PORT_STATE_PHY8_PORT_NUM_OFF; + link_rate = (port_state & PORT_STATE_PHY8_CONN_RATE_MSK) >> + PORT_STATE_PHY8_CONN_RATE_OFF; + } else { + port_id = hisi_sas_read32(hisi_hba, PHY_PORT_NUM_MA); + port_id = (port_id >> (4 * phy_no)) & 0xf; + link_rate = hisi_sas_read32(hisi_hba, PHY_CONN_RATE); + link_rate = (link_rate >> (phy_no * 4)) & 0xf; + } + + if (port_id == 0xf) { + dev_err(dev, "phyup: phy%d invalid portid\n", phy_no); + res = IRQ_NONE; + goto end; + } + + for (i = 0; i < 6; i++) { + u32 idaf = hisi_sas_phy_read32(hisi_hba, phy_no, + RX_IDAF_DWORD0 + (i * 4)); + frame_rcvd[i] = __swab32(idaf); + } + + /* Get the linkrates */ + link_rate = hisi_sas_read32(hisi_hba, PHY_CONN_RATE); + link_rate = (link_rate >> (phy_no * 4)) & 0xf; + sas_phy->linkrate = link_rate; + hard_phy_linkrate = hisi_sas_phy_read32(hisi_hba, phy_no, + HARD_PHY_LINKRATE); + phy->maximum_linkrate = hard_phy_linkrate & 0xf; + phy->minimum_linkrate = (hard_phy_linkrate >> 4) & 0xf; + + sas_phy->oob_mode = SAS_OOB_MODE; + memcpy(sas_phy->attached_sas_addr, &id->sas_addr, SAS_ADDR_SIZE); + dev_info(dev, "phyup: phy%d link_rate=%d\n", phy_no, link_rate); + phy->port_id = port_id; + phy->phy_type &= ~(PORT_TYPE_SAS | PORT_TYPE_SATA); + phy->phy_type |= PORT_TYPE_SAS; + phy->phy_attached = 1; + phy->identify.device_type = id->dev_type; + phy->frame_rcvd_size = sizeof(struct sas_identify_frame); + if (phy->identify.device_type == SAS_END_DEVICE) + phy->identify.target_port_protocols = + SAS_PROTOCOL_SSP; + else if (phy->identify.device_type != SAS_PHY_UNUSED) + phy->identify.target_port_protocols = + SAS_PROTOCOL_SMP; + queue_work(hisi_hba->wq, &phy->phyup_ws); + +end: + hisi_sas_phy_write32(hisi_hba, phy_no, CHL_INT0, + CHL_INT0_SL_PHY_ENABLE_MSK); + hisi_sas_phy_write32(hisi_hba, phy_no, PHYCTRL_PHY_ENA_MSK, 0); + + return res; +} + +static irqreturn_t int_phy_updown_v2_hw(int irq_no, void *p) +{ + struct hisi_hba *hisi_hba = p; + u32 irq_msk; + int phy_no = 0; + irqreturn_t res = IRQ_HANDLED; + + irq_msk = (hisi_sas_read32(hisi_hba, HGC_INVLD_DQE_INFO) + >> HGC_INVLD_DQE_INFO_FB_CH0_OFF) & 0x1ff; + while (irq_msk) { + if (irq_msk & 1) { + u32 irq_value = hisi_sas_phy_read32(hisi_hba, phy_no, + CHL_INT0); + + if (irq_value & CHL_INT0_SL_PHY_ENABLE_MSK) + /* phy up */ + if (phy_up_v2_hw(phy_no, hisi_hba)) { + res = IRQ_NONE; + goto end; + } + + } + irq_msk >>= 1; + phy_no++; + } + +end: + return res; +} + +static irq_handler_t phy_interrupts[HISI_SAS_PHY_INT_NR] = { + int_phy_updown_v2_hw, +}; + +/** + * There is a limitation in the hip06 chipset that we need + * to map in all mbigen interrupts, even if they are not used. + */ +static int interrupt_init_v2_hw(struct hisi_hba *hisi_hba) +{ + struct platform_device *pdev = hisi_hba->pdev; + struct device *dev = &pdev->dev; + int i, irq, rc, irq_map[128]; + + + for (i = 0; i < 128; i++) + irq_map[i] = platform_get_irq(pdev, i); + + for (i = 0; i < HISI_SAS_PHY_INT_NR; i++) { + int idx = i; + + irq = irq_map[idx + 1]; /* Phy up/down is irq1 */ + if (!irq) { + dev_err(dev, "irq init: fail map phy interrupt %d\n", + idx); + return -ENOENT; + } + + rc = devm_request_irq(dev, irq, phy_interrupts[i], 0, + DRV_NAME " phy", hisi_hba); + if (rc) { + dev_err(dev, "irq init: could not request " + "phy interrupt %d, rc=%d\n", + irq, rc); + return -ENOENT; + } + } + + return 0; +} + static int hisi_sas_v2_init(struct hisi_hba *hisi_hba) { int rc; @@ -618,6 +784,10 @@ static int hisi_sas_v2_init(struct hisi_hba *hisi_hba) if (rc) return rc; + rc = interrupt_init_v2_hw(hisi_hba); + if (rc) + return rc; + phys_init_v2_hw(hisi_hba); return 0; @@ -625,6 +795,7 @@ static int hisi_sas_v2_init(struct hisi_hba *hisi_hba) static const struct hisi_sas_hw hisi_sas_v2_hw = { .hw_init = hisi_sas_v2_init, + .sl_notify = sl_notify_v2_hw, .max_command_entries = HISI_SAS_COMMAND_ENTRIES_V2_HW, .complete_hdr_size = sizeof(struct hisi_sas_complete_v2_hdr), }; -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html