On Mon, Feb 01, 2016 at 03:42:44PM +0530, Jitendra Bhivare wrote:
> be_mbox_notify_wait does exactly same thing as be_mbox_notify.
> 
> Signed-off-by: Jitendra Bhivare <jitendra.bhiv...@avagotech.com>
> ---
>  drivers/scsi/be2iscsi/be_cmds.c | 79 
> +++--------------------------------------
>  1 file changed, 4 insertions(+), 75 deletions(-)
> 
> diff --git a/drivers/scsi/be2iscsi/be_cmds.c b/drivers/scsi/be2iscsi/be_cmds.c
> index 8dd8521..12b60dd 100644
> --- a/drivers/scsi/be2iscsi/be_cmds.c
> +++ b/drivers/scsi/be2iscsi/be_cmds.c
> @@ -625,8 +625,6 @@ int be_mbox_notify(struct be_ctrl_info *ctrl)
>       void __iomem *db = ctrl->db + MPU_MAILBOX_DB_OFFSET;
>       struct be_dma_mem *mbox_mem = &ctrl->mbox_mem;
>       struct be_mcc_mailbox *mbox = mbox_mem->va;
> -     struct be_mcc_compl *compl = &mbox->compl;
> -     struct beiscsi_hba *phba = pci_get_drvdata(ctrl->pdev);
>  
>       status = be_mbox_db_ready_poll(ctrl);
>       if (status)
> @@ -654,77 +652,8 @@ int be_mbox_notify(struct be_ctrl_info *ctrl)
>       /* RDY is set; small delay before CQE read. */
>       udelay(1);
>  
> -     if (be_mcc_compl_is_new(compl)) {
> -             status = beiscsi_process_mbox_compl(ctrl, compl);
> -             be_mcc_compl_use(compl);
> -             if (status) {
> -                     beiscsi_log(phba, KERN_ERR,
> -                                 BEISCSI_LOG_CONFIG | BEISCSI_LOG_MBOX,
> -                                 "BC_%d : After be_mcc_compl_process\n");
> -
> -                     return status;
> -             }
> -     } else {
> -             beiscsi_log(phba, KERN_ERR,
> -                         BEISCSI_LOG_CONFIG | BEISCSI_LOG_MBOX,
> -                         "BC_%d : Invalid Mailbox Completion\n");
> -
> -             return -EBUSY;
> -     }
> -     return 0;
> -}
> -
> -/*
> - * Insert the mailbox address into the doorbell in two steps
> - * Polls on the mbox doorbell till a command completion (or a timeout) occurs
> - */
> -static int be_mbox_notify_wait(struct beiscsi_hba *phba)
> -{
> -     int status;
> -     u32 val = 0;
> -     void __iomem *db = phba->ctrl.db + MPU_MAILBOX_DB_OFFSET;
> -     struct be_dma_mem *mbox_mem = &phba->ctrl.mbox_mem;
> -     struct be_mcc_mailbox *mbox = mbox_mem->va;
> -     struct be_mcc_compl *compl = &mbox->compl;
> -     struct be_ctrl_info *ctrl = &phba->ctrl;
> -
> -     status = be_mbox_db_ready_poll(ctrl);
> -     if (status)
> -             return status;
> -
> -     val |= MPU_MAILBOX_DB_HI_MASK;
> -     /* at bits 2 - 31 place mbox dma addr msb bits 34 - 63 */
> -     val |= (upper_32_bits(mbox_mem->dma) >> 2) << 2;
> -     iowrite32(val, db);
> -
> -     /* wait for ready to be set */
> -     status = be_mbox_db_ready_poll(ctrl);
> -     if (status != 0)
> -             return status;
> -
> -     val = 0;
> -     /* at bits 2 - 31 place mbox dma addr lsb bits 4 - 33 */
> -     val |= (u32)(mbox_mem->dma >> 4) << 2;
> -     iowrite32(val, db);
> -
> -     status = be_mbox_db_ready_poll(ctrl);
> -     if (status != 0)
> -             return status;
> -
> -     /* A cq entry has been made now */
> -     if (be_mcc_compl_is_new(compl)) {
> -             status = be_mcc_compl_process(ctrl, &mbox->compl);
> -             be_mcc_compl_use(compl);
> -             if (status)
> -                     return status;
> -     } else {
> -             beiscsi_log(phba, KERN_ERR,
> -                         BEISCSI_LOG_CONFIG | BEISCSI_LOG_MBOX,
> -                         "BC_%d : invalid mailbox completion\n");
> -
> -             return -EBUSY;
> -     }
> -     return 0;
> +     status = beiscsi_process_mbox_compl(ctrl, &mbox->compl);
> +     return status;
>  }
>  
>  void be_wrb_hdr_prepare(struct be_mcc_wrb *wrb, int payload_len,
> @@ -1039,7 +968,7 @@ int beiscsi_cmd_mccq_create(struct beiscsi_hba *phba,
>  
>       be_cmd_page_addrs_prepare(req->pages, ARRAY_SIZE(req->pages), q_mem);
>  
> -     status = be_mbox_notify_wait(phba);
> +     status = be_mbox_notify(ctrl);
>       if (!status) {
>               struct be_cmd_resp_mcc_create *resp = embedded_payload(wrb);
>               mccq->id = le16_to_cpu(resp->id);
> @@ -1381,7 +1310,7 @@ int beiscsi_cmd_reset_function(struct beiscsi_hba  
> *phba)
>       be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
>       be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
>                          OPCODE_COMMON_FUNCTION_RESET, sizeof(*req));
> -     status = be_mbox_notify_wait(phba);
> +     status = be_mbox_notify(ctrl);
>  
>       mutex_unlock(&ctrl->mbox_lock);
>       return status;
> -- 
> 2.5.0
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
> the body of a message to majord...@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reviewed-by: Johannes Thumshirn <jthumsh...@suse.de>
-- 
Johannes Thumshirn                                          Storage
jthumsh...@suse.de                                +49 911 74053 689
SUSE LINUX GmbH, Maxfeldstr. 5, 90409 Nürnberg
GF: Felix Imendörffer, Jane Smithard, Graham Norton
HRB 21284 (AG Nürnberg)
Key fingerprint = EC38 9CAB C2C4 F25D 8600 D0D0 0393 969D 2D76 0850
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to