Decode all bits in the chip registers. They are all useful at times.
Fix printk severity so that this output can be suppressed along with
the other debugging output.
Signed-off-by: Finn Thain <fth...@telegraphics.com.au>
---
drivers/scsi/NCR5380.c | 42 +++++++++++++++++++++++++-----------------
1 file changed, 25 insertions(+), 17 deletions(-)
Index: linux/drivers/scsi/NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/NCR5380.c 2016-03-14 15:26:48.000000000 +1100
+++ linux/drivers/scsi/NCR5380.c 2016-03-14 15:26:50.000000000 +1100
@@ -256,12 +256,20 @@ static struct {
{0, NULL}
},
basrs[] = {
+ {BASR_END_DMA_TRANSFER, "END OF DMA"},
+ {BASR_DRQ, "DRQ"},
+ {BASR_PARITY_ERROR, "PARITY ERROR"},
+ {BASR_IRQ, "IRQ"},
+ {BASR_PHASE_MATCH, "PHASE MATCH"},
+ {BASR_BUSY_ERROR, "BUSY ERROR"},
{BASR_ATN, "ATN"},
{BASR_ACK, "ACK"},
{0, NULL}
},
icrs[] = {
{ICR_ASSERT_RST, "ASSERT RST"},
+ {ICR_ARBITRATION_PROGRESS, "ARB. IN PROGRESS"},
+ {ICR_ARBITRATION_LOST, "LOST ARB."},
{ICR_ASSERT_ACK, "ASSERT ACK"},
{ICR_ASSERT_BSY, "ASSERT BSY"},
{ICR_ASSERT_SEL, "ASSERT SEL"},
@@ -270,14 +278,14 @@ icrs[] = {
{0, NULL}
},
mrs[] = {
- {MR_BLOCK_DMA_MODE, "MODE BLOCK DMA"},
- {MR_TARGET, "MODE TARGET"},
- {MR_ENABLE_PAR_CHECK, "MODE PARITY CHECK"},
- {MR_ENABLE_PAR_INTR, "MODE PARITY INTR"},
- {MR_ENABLE_EOP_INTR, "MODE EOP INTR"},
- {MR_MONITOR_BSY, "MODE MONITOR BSY"},
- {MR_DMA_MODE, "MODE DMA"},
- {MR_ARBITRATE, "MODE ARBITRATION"},
+ {MR_BLOCK_DMA_MODE, "BLOCK DMA MODE"},
+ {MR_TARGET, "TARGET"},
+ {MR_ENABLE_PAR_CHECK, "PARITY CHECK"},
+ {MR_ENABLE_PAR_INTR, "PARITY INTR"},
+ {MR_ENABLE_EOP_INTR, "EOP INTR"},
+ {MR_MONITOR_BSY, "MONITOR BSY"},
+ {MR_DMA_MODE, "DMA MODE"},
+ {MR_ARBITRATE, "ARBITRATE"},
{0, NULL}
};
@@ -298,23 +306,23 @@ static void NCR5380_print(struct Scsi_Ho
icr = NCR5380_read(INITIATOR_COMMAND_REG);
basr = NCR5380_read(BUS_AND_STATUS_REG);
- printk("STATUS_REG: %02x ", status);
+ printk(KERN_DEBUG "SR = 0x%02x : ", status);
for (i = 0; signals[i].mask; ++i)
if (status & signals[i].mask)
- printk(",%s", signals[i].name);
- printk("\nBASR: %02x ", basr);
+ printk(KERN_CONT "%s, ", signals[i].name);
+ printk(KERN_CONT "\nBASR = 0x%02x : ", basr);
for (i = 0; basrs[i].mask; ++i)
if (basr & basrs[i].mask)
- printk(",%s", basrs[i].name);
- printk("\nICR: %02x ", icr);
+ printk(KERN_CONT "%s, ", basrs[i].name);
+ printk(KERN_CONT "\nICR = 0x%02x : ", icr);
for (i = 0; icrs[i].mask; ++i)
if (icr & icrs[i].mask)
- printk(",%s", icrs[i].name);
- printk("\nMODE: %02x ", mr);
+ printk(KERN_CONT "%s, ", icrs[i].name);
+ printk(KERN_CONT "\nMR = 0x%02x : ", mr);
for (i = 0; mrs[i].mask; ++i)
if (mr & mrs[i].mask)
- printk(",%s", mrs[i].name);
- printk("\n");
+ printk(KERN_CONT "%s, ", mrs[i].name);
+ printk(KERN_CONT "\n");
}
static struct {
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
