Register UFS RPMB LUN with the RPMB subsystem and provide
implementation for the RPMB access operations. RPMB partition is
accessed via a sequence of security protocol in and security protocol
out commands with UFS specific parameters. This multi step process is
abstracted into 4 basic RPMB commands.

V2: resend
V3: resend
V4: Kconfig: use select RPMB to ensure valid configuration

Signed-off-by: Alexander Usyskin <alexander.usys...@intel.com>
Signed-off-by: Tomas Winkler <tomas.wink...@intel.com>
---
 drivers/scsi/ufs/Kconfig  |   1 +
 drivers/scsi/ufs/ufshcd.c | 219 ++++++++++++++++++++++++++++++++++++++++++++++
 drivers/scsi/ufs/ufshcd.h |   2 +
 3 files changed, 222 insertions(+)

diff --git a/drivers/scsi/ufs/Kconfig b/drivers/scsi/ufs/Kconfig
index 097894a1fab5..e6ff8ecff695 100644
--- a/drivers/scsi/ufs/Kconfig
+++ b/drivers/scsi/ufs/Kconfig
@@ -38,6 +38,7 @@ config SCSI_UFSHCD
        select PM_DEVFREQ
        select DEVFREQ_GOV_SIMPLE_ONDEMAND
        select NLS
+       select RPMB
        ---help---
        This selects the support for UFS devices in Linux, say Y and make
          sure that you know the name of your UFS host adapter (the card
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index f8fa72c31a9d..c087e9713db3 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -37,10 +37,13 @@
  * license terms, and distributes only under these terms.
  */
 
+#include <asm/unaligned.h>
 #include <linux/async.h>
 #include <linux/devfreq.h>
 #include <linux/nls.h>
 #include <linux/of.h>
+#include <linux/rpmb.h>
+
 #include "ufshcd.h"
 #include "ufs_quirks.h"
 #include "unipro.h"
@@ -4744,6 +4747,214 @@ static void ufshcd_init_icc_levels(struct ufs_hba *hba)
 
 }
 
+#define SEC_PROTOCOL_UFS  0xEC
+#define   SEC_SPECIFIC_UFS_RPMB 0x0001
+
+#define SEC_PROTOCOL_CMD_SIZE 12
+#define SEC_PROTOCOL_RETRIES 3
+#define SEC_PROTOCOL_RETRIES_ON_RESET 10
+#define SEC_PROTOCOL_TIMEOUT msecs_to_jiffies(1000)
+
+static int
+ufshcd_rpmb_security_out(struct scsi_device *sdev,
+                        struct rpmb_frame *frames, u32 cnt)
+{
+       struct scsi_sense_hdr sshdr;
+       u32 trans_len = cnt * sizeof(struct rpmb_frame);
+       int reset_retries = SEC_PROTOCOL_RETRIES_ON_RESET;
+       int ret;
+       u8 cmd[SEC_PROTOCOL_CMD_SIZE];
+
+retry:
+       memset(cmd, 0, SEC_PROTOCOL_CMD_SIZE);
+       cmd[0] = SECURITY_PROTOCOL_OUT;
+       cmd[1] = SEC_PROTOCOL_UFS;
+       put_unaligned_be16(SEC_SPECIFIC_UFS_RPMB, cmd + 2);
+       cmd[4] = 0;                              /* inc_512 bit 7 set to 0 */
+       put_unaligned_be32(trans_len, cmd + 6);  /* transfer length */
+
+       ret = scsi_execute_req_flags(sdev, cmd, DMA_TO_DEVICE,
+                                    frames, trans_len, &sshdr,
+                                    SEC_PROTOCOL_TIMEOUT, SEC_PROTOCOL_RETRIES,
+                                    NULL, 0);
+       if (ret && scsi_sense_valid(&sshdr) &&
+           sshdr.sense_key == UNIT_ATTENTION &&
+           sshdr.asc == 0x29 && sshdr.ascq == 0x00)
+               /* Device reset might occur several times,
+                * give it one more chance
+                */
+               if (--reset_retries > 0)
+                       goto retry;
+
+       if (ret)
+               pr_err("%s: failed with err %0x\n", __func__, ret);
+
+       if (driver_byte(ret) & DRIVER_SENSE)
+               scsi_print_sense_hdr(sdev, "rpmb: security out", &sshdr);
+
+       return ret;
+}
+
+static int
+ufshcd_rpmb_security_in(struct scsi_device *sdev,
+                       struct rpmb_frame *frames, u32 cnt)
+{
+       struct scsi_sense_hdr sshdr;
+       u32 alloc_len = cnt * sizeof(struct rpmb_frame);
+       int reset_retries = SEC_PROTOCOL_RETRIES_ON_RESET;
+       int ret;
+       u8 cmd[SEC_PROTOCOL_CMD_SIZE];
+
+retry:
+       memset(cmd, 0, SEC_PROTOCOL_CMD_SIZE);
+       cmd[0] = SECURITY_PROTOCOL_IN;
+       cmd[1] = SEC_PROTOCOL_UFS;
+       put_unaligned_be16(SEC_SPECIFIC_UFS_RPMB, cmd + 2);
+       cmd[4] = 0;                             /* inc_512 bit 7 set to 0 */
+       put_unaligned_be32(alloc_len, cmd + 6); /* allocation length */
+
+       ret = scsi_execute_req_flags(sdev, cmd, DMA_FROM_DEVICE,
+                                    frames, alloc_len, &sshdr,
+                                    SEC_PROTOCOL_TIMEOUT, SEC_PROTOCOL_RETRIES,
+                                    NULL, 0);
+       if (ret && scsi_sense_valid(&sshdr) &&
+           sshdr.sense_key == UNIT_ATTENTION &&
+           sshdr.asc == 0x29 && sshdr.ascq == 0x00)
+               /* Device reset might occur several times,
+                * give it one more chance
+                */
+               if (--reset_retries > 0)
+                       goto retry;
+
+       if (ret)
+               pr_err("%s: failed with err %0x\n", __func__, ret);
+
+       if (driver_byte(ret) & DRIVER_SENSE)
+               scsi_print_sense_hdr(sdev, "rpmb: security in", &sshdr);
+
+       return ret;
+}
+
+
+static int ufshcd_rpmb_send_req(struct device *dev, struct rpmb_data *rpmbd)
+{
+       unsigned long flags;
+       struct ufs_hba *hba = dev_get_drvdata(dev);
+       struct scsi_device *sdev;
+       struct rpmb_frame *in_frames, *out_frames;
+       u16 blks;
+       u16 type;
+       int ret;
+
+       in_frames = rpmbd->in_frames;
+       out_frames = rpmbd->out_frames;
+
+       type = rpmbd->req_type;
+       blks = be16_to_cpu(in_frames[0].block_count);
+
+       dev_dbg(hba->dev, "RPMB : type = %d, blocks = %d\n", type, blks);
+
+       spin_lock_irqsave(hba->host->host_lock, flags);
+       sdev = hba->sdev_ufs_rpmb;
+       if (sdev) {
+               ret = scsi_device_get(sdev);
+               if (!ret && !scsi_device_online(sdev)) {
+                       ret = -ENODEV;
+                       scsi_device_put(sdev);
+               }
+       } else {
+               ret = -ENODEV;
+       }
+       spin_unlock_irqrestore(hba->host->host_lock, flags);
+       if (ret)
+               return ret;
+
+       switch (type) {
+       case RPMB_PROGRAM_KEY:
+               blks = 1;
+               /* fall through */
+       case RPMB_WRITE_DATA:
+               /* STEP 1: send request to RPMB partition */
+               ret = ufshcd_rpmb_security_out(sdev, in_frames, blks);
+               if (ret)
+                       break;
+
+               /* STEP 2: check write result (reuse out_frames) */
+               memset(out_frames, 0, 512);
+               out_frames[0].req_resp = cpu_to_be16(RPMB_RESULT_READ);
+               ret = ufshcd_rpmb_security_out(sdev, out_frames, 1);
+               if (ret)
+                       break;
+
+               /* STEP 3: get response from RPMB partition */
+               ret = ufshcd_rpmb_security_in(sdev, out_frames, 1);
+               if (ret)
+                       break;
+
+               break;
+       case RPMB_GET_WRITE_COUNTER:
+               blks = 1;
+               /* fall through */
+       case RPMB_READ_DATA:
+               /* STEP 1: send request to RPMB partition */
+               ret = ufshcd_rpmb_security_out(sdev, in_frames, 1);
+               if (ret)
+                       break;
+               /* STEP 2: get response from RPMB partition */
+               ret = ufshcd_rpmb_security_in(sdev, out_frames, blks);
+               if (ret)
+                       break;
+               break;
+       default:
+               ret = -EINVAL;
+               break;
+       }
+
+       scsi_device_put(sdev);
+       return ret;
+}
+
+static struct rpmb_ops ufshcd_rpmb_dev_ops = {
+       .send_rpmb_req = ufshcd_rpmb_send_req,
+       .type = RPMB_TYPE_UFS,
+};
+
+static inline void ufshcd_rpmb_add(struct ufs_hba *hba)
+{
+       struct rpmb_dev *rdev;
+
+       scsi_device_get(hba->sdev_ufs_rpmb);
+       rdev = rpmb_dev_register(hba->dev, &ufshcd_rpmb_dev_ops);
+       if (IS_ERR(rdev)) {
+               dev_warn(hba->dev, "%s: cannot register to rpmb %ld\n",
+                        dev_name(hba->dev), PTR_ERR(rdev));
+               goto out_put_dev;
+       }
+
+       return;
+
+out_put_dev:
+       scsi_device_put(hba->sdev_ufs_rpmb);
+       hba->sdev_ufs_rpmb = NULL;
+}
+
+static inline void ufshcd_rpmb_remove(struct ufs_hba *hba)
+{
+       unsigned long flags;
+
+       if (!hba->sdev_ufs_rpmb)
+               return;
+
+       spin_lock_irqsave(hba->host->host_lock, flags);
+
+       rpmb_dev_unregister(hba->dev);
+       scsi_device_put(hba->sdev_ufs_rpmb);
+       hba->sdev_ufs_rpmb = NULL;
+
+       spin_unlock_irqrestore(hba->host->host_lock, flags);
+}
+
+
 /**
  * ufshcd_scsi_add_wlus - Adds required W-LUs
  * @hba: per-adapter instance
@@ -4799,7 +5010,11 @@ static int ufshcd_scsi_add_wlus(struct ufs_hba *hba)
                ret = PTR_ERR(sdev_rpmb);
                goto remove_sdev_boot;
        }
+       hba->sdev_ufs_rpmb = sdev_rpmb;
+
+       ufshcd_rpmb_add(hba);
        scsi_device_put(sdev_rpmb);
+
        goto out;
 
 remove_sdev_boot:
@@ -6168,6 +6383,8 @@ int ufshcd_shutdown(struct ufs_hba *hba)
                        goto out;
        }
 
+       ufshcd_rpmb_remove(hba);
+
        ret = ufshcd_suspend(hba, UFS_SHUTDOWN_PM);
 out:
        if (ret)
@@ -6184,6 +6401,8 @@ EXPORT_SYMBOL(ufshcd_shutdown);
  */
 void ufshcd_remove(struct ufs_hba *hba)
 {
+       ufshcd_rpmb_remove(hba);
+
        scsi_remove_host(hba->host);
        /* disable interrupts */
        ufshcd_disable_intr(hba, hba->intr_mask);
diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
index 4bb65669f052..92bfddf80ae8 100644
--- a/drivers/scsi/ufs/ufshcd.h
+++ b/drivers/scsi/ufs/ufshcd.h
@@ -346,6 +346,7 @@ struct ufs_init_prefetch {
  * @utmrdl_dma_addr: UTMRDL DMA address
  * @host: Scsi_Host instance of the driver
  * @dev: device handle
+ * @sdev_ufs_rpmb: reference to RPMB device W-LU
  * @lrb: local reference block
  * @lrb_in_use: lrb in use
  * @outstanding_tasks: Bits representing outstanding task requests
@@ -408,6 +409,7 @@ struct ufs_hba {
         * "UFS device" W-LU.
         */
        struct scsi_device *sdev_ufs_device;
+       struct scsi_device *sdev_ufs_rpmb;
 
        enum ufs_dev_pwr_mode curr_dev_pwr_mode;
        enum uic_link_state uic_link_state;
-- 
2.5.5

--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to