Following configuration is created with what driver exports:
iface.vlan_id = 65535
iface.vlan_priority = 255
iface.vlan_state = <empty>
vlan_state is empty as iscsiadm doesn't process "Disabled".
When applying this configuration, iscsiadm checks for if vlan_state is
"disable" if not it enables with value in vlan_id. 65535 not being valid
value, 0 is applied.
Use "enable" or "disable" for ISCSI_NET_PARAM.
Signed-off-by: Jitendra Bhivare <jitendra.bhiv...@broadcom.com>
Reviewed-by: Hannes Reinecke <h...@suse.com>
---
drivers/scsi/be2iscsi/be_iscsi.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/scsi/be2iscsi/be_iscsi.c b/drivers/scsi/be2iscsi/be_iscsi.c
index 09f89a3..ab696ec 100644
--- a/drivers/scsi/be2iscsi/be_iscsi.c
+++ b/drivers/scsi/be2iscsi/be_iscsi.c
@@ -567,8 +567,8 @@ static int be2iscsi_get_if_param(struct beiscsi_hba *phba,
break;
case ISCSI_NET_PARAM_VLAN_ENABLED:
len = sprintf(buf, "%s\n",
- (if_info->vlan_priority == BEISCSI_VLAN_DISABLE)
- ? "Disabled\n" : "Enabled\n");
+ (if_info->vlan_priority == BEISCSI_VLAN_DISABLE) ?
+ "disable" : "enable");
break;
case ISCSI_NET_PARAM_VLAN_ID:
if (if_info->vlan_priority == BEISCSI_VLAN_DISABLE)
@@ -620,7 +620,7 @@ int be2iscsi_iface_get_param(struct iscsi_iface *iface,
len = be2iscsi_get_if_param(phba, iface, param, buf);
break;
case ISCSI_NET_PARAM_IFACE_ENABLE:
- len = sprintf(buf, "enabled\n");
+ len = sprintf(buf, "enable\n");
break;
case ISCSI_NET_PARAM_IPV4_GW:
memset(&gateway, 0, sizeof(gateway));
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
