Hi Manish,
Some initital comments
On Wed, Oct 19, 2016 at 01:01:08AM -0400, manish.rangan...@cavium.com wrote:
> From: Yuval Mintz <yuval.mi...@qlogic.com>
>
> This adds the backbone required for the various HW initalizations
> which are necessary for the iSCSI driver (qedi) for QLogic FastLinQ
> 4xxxx line of adapters - FW notification, resource initializations, etc.
>
> Signed-off-by: Arun Easi <arun.e...@cavium.com>
> Signed-off-by: Yuval Mintz <yuval.mi...@cavium.com>
> ---
> drivers/net/ethernet/qlogic/Kconfig | 15 +
> drivers/net/ethernet/qlogic/qed/Makefile | 1 +
> drivers/net/ethernet/qlogic/qed/qed.h | 8 +-
> drivers/net/ethernet/qlogic/qed/qed_dev.c | 15 +
> drivers/net/ethernet/qlogic/qed/qed_int.h | 1 -
> drivers/net/ethernet/qlogic/qed/qed_iscsi.c | 1310
> ++++++++++++++++++++++++
> drivers/net/ethernet/qlogic/qed/qed_iscsi.h | 52 +
> drivers/net/ethernet/qlogic/qed/qed_l2.c | 1 -
> drivers/net/ethernet/qlogic/qed/qed_ll2.c | 35 +-
> drivers/net/ethernet/qlogic/qed/qed_main.c | 2 -
> drivers/net/ethernet/qlogic/qed/qed_mcp.h | 6 -
> drivers/net/ethernet/qlogic/qed/qed_reg_addr.h | 2 +
> drivers/net/ethernet/qlogic/qed/qed_spq.c | 15 +
> include/linux/qed/qed_if.h | 2 +
> include/linux/qed/qed_iscsi_if.h | 249 +++++
> 15 files changed, 1692 insertions(+), 22 deletions(-)
> create mode 100644 drivers/net/ethernet/qlogic/qed/qed_iscsi.c
> create mode 100644 drivers/net/ethernet/qlogic/qed/qed_iscsi.h
> create mode 100644 include/linux/qed/qed_iscsi_if.h
>
> diff --git a/drivers/net/ethernet/qlogic/Kconfig
> b/drivers/net/ethernet/qlogic/Kconfig
> index 0df1391f9..bad4fae 100644
> --- a/drivers/net/ethernet/qlogic/Kconfig
> +++ b/drivers/net/ethernet/qlogic/Kconfig
> @@ -118,4 +118,19 @@ config INFINIBAND_QEDR
> for QLogic QED. This would be replaced by the 'real' option
> once the QEDR driver is added [+relocated].
>
> +config QED_ISCSI
> + bool
> +
> +config QEDI
> + tristate "QLogic QED 25/40/100Gb iSCSI driver"
> + depends on QED
> + select QED_LL2
> + select QED_ISCSI
> + default n
> + ---help---
> + This provides a temporary node that allows the compilation
> + and logical testing of the hardware offload iSCSI support
> + for QLogic QED. This would be replaced by the 'real' option
> + once the QEDI driver is added [+relocated].
> +
> endif # NET_VENDOR_QLOGIC
> diff --git a/drivers/net/ethernet/qlogic/qed/Makefile
> b/drivers/net/ethernet/qlogic/qed/Makefile
> index cda0af7..b76669c 100644
> --- a/drivers/net/ethernet/qlogic/qed/Makefile
> +++ b/drivers/net/ethernet/qlogic/qed/Makefile
> @@ -6,3 +6,4 @@ qed-y := qed_cxt.o qed_dev.o qed_hw.o qed_init_fw_funcs.o
> qed_init_ops.o \
> qed-$(CONFIG_QED_SRIOV) += qed_sriov.o qed_vf.o
> qed-$(CONFIG_QED_LL2) += qed_ll2.o
> qed-$(CONFIG_INFINIBAND_QEDR) += qed_roce.o
> +qed-$(CONFIG_QED_ISCSI) += qed_iscsi.o
> diff --git a/drivers/net/ethernet/qlogic/qed/qed.h
> b/drivers/net/ethernet/qlogic/qed/qed.h
> index 653bb57..a61b1c0 100644
> --- a/drivers/net/ethernet/qlogic/qed/qed.h
> +++ b/drivers/net/ethernet/qlogic/qed/qed.h
> @@ -35,6 +35,7 @@
>
> #define QED_WFQ_UNIT 100
>
> +#define ISCSI_BDQ_ID(_port_id) (_port_id)
This looks a bit odd to me.
[...]
> #endif
> + if (IS_ENABLED(CONFIG_QEDI) &&
> + p_hwfn->hw_info.personality == QED_PCI_ISCSI)
> + qed_iscsi_free(p_hwfn, p_hwfn->p_iscsi_info);
Why not introduce a small helper like:
static inline bool qed_is_iscsi_personality()
{
return IS_ENABLED(CONFIG_QEDI) && p_hwfn->hw_info.personality ==
QED_PCI_ISCSI;
}
> qed_iov_free(p_hwfn);
[...]
> +
> + if (!GET_FIELD(p_ramrod->iscsi.flags,
> + ISCSI_CONN_OFFLOAD_PARAMS_TCP_ON_CHIP_1B)) {
> + p_tcp = &p_ramrod->tcp;
> + ucval = p_conn->local_mac[1];
> + ((u8 *)(&p_tcp->local_mac_addr_hi))[0] = ucval;
> + ucval = p_conn->local_mac[0];
> + ((u8 *)(&p_tcp->local_mac_addr_hi))[1] = ucval;
> + ucval = p_conn->local_mac[3];
> + ((u8 *)(&p_tcp->local_mac_addr_mid))[0] = ucval;
> + ucval = p_conn->local_mac[2];
> + ((u8 *)(&p_tcp->local_mac_addr_mid))[1] = ucval;
> + ucval = p_conn->local_mac[5];
> + ((u8 *)(&p_tcp->local_mac_addr_lo))[0] = ucval;
> + ucval = p_conn->local_mac[4];
> + ((u8 *)(&p_tcp->local_mac_addr_lo))[1] = ucval;
> + ucval = p_conn->remote_mac[1];
> + ((u8 *)(&p_tcp->remote_mac_addr_hi))[0] = ucval;
> + ucval = p_conn->remote_mac[0];
> + ((u8 *)(&p_tcp->remote_mac_addr_hi))[1] = ucval;
> + ucval = p_conn->remote_mac[3];
> + ((u8 *)(&p_tcp->remote_mac_addr_mid))[0] = ucval;
> + ucval = p_conn->remote_mac[2];
> + ((u8 *)(&p_tcp->remote_mac_addr_mid))[1] = ucval;
> + ucval = p_conn->remote_mac[5];
> + ((u8 *)(&p_tcp->remote_mac_addr_lo))[0] = ucval;
> + ucval = p_conn->remote_mac[4];
> + ((u8 *)(&p_tcp->remote_mac_addr_lo))[1] = ucval;
> +
> + p_tcp->vlan_id = cpu_to_le16(p_conn->vlan_id);
> +
> + p_tcp->flags = p_conn->tcp_flags;
> + p_tcp->ip_version = p_conn->ip_version;
> + for (i = 0; i < 4; i++) {
> + dval = p_conn->remote_ip[i];
> + p_tcp->remote_ip[i] = cpu_to_le32(dval);
> + dval = p_conn->local_ip[i];
> + p_tcp->local_ip[i] = cpu_to_le32(dval);
> + }
> + p_tcp->ka_max_probe_cnt = p_conn->ka_max_probe_cnt;
> + p_tcp->dup_ack_theshold = p_conn->dup_ack_theshold;
> +
> + p_tcp->rcv_next = cpu_to_le32(p_conn->rcv_next);
> + p_tcp->snd_una = cpu_to_le32(p_conn->snd_una);
> + p_tcp->snd_next = cpu_to_le32(p_conn->snd_next);
> + p_tcp->snd_max = cpu_to_le32(p_conn->snd_max);
> + p_tcp->snd_wnd = cpu_to_le32(p_conn->snd_wnd);
> + p_tcp->rcv_wnd = cpu_to_le32(p_conn->rcv_wnd);
> + p_tcp->snd_wl1 = cpu_to_le32(p_conn->snd_wl1);
> + p_tcp->cwnd = cpu_to_le32(p_conn->cwnd);
> + p_tcp->ss_thresh = cpu_to_le32(p_conn->ss_thresh);
> + p_tcp->srtt = cpu_to_le16(p_conn->srtt);
> + p_tcp->rtt_var = cpu_to_le16(p_conn->rtt_var);
> + p_tcp->ts_time = cpu_to_le32(p_conn->ts_time);
> + p_tcp->ts_recent = cpu_to_le32(p_conn->ts_recent);
> + p_tcp->ts_recent_age = cpu_to_le32(p_conn->ts_recent_age);
> + p_tcp->total_rt = cpu_to_le32(p_conn->total_rt);
> + dval = p_conn->ka_timeout_delta;
> + p_tcp->ka_timeout_delta = cpu_to_le32(dval);
> + dval = p_conn->rt_timeout_delta;
> + p_tcp->rt_timeout_delta = cpu_to_le32(dval);
> + p_tcp->dup_ack_cnt = p_conn->dup_ack_cnt;
> + p_tcp->snd_wnd_probe_cnt = p_conn->snd_wnd_probe_cnt;
> + p_tcp->ka_probe_cnt = p_conn->ka_probe_cnt;
> + p_tcp->rt_cnt = p_conn->rt_cnt;
> + p_tcp->flow_label = cpu_to_le32(p_conn->flow_label);
> + p_tcp->ka_timeout = cpu_to_le32(p_conn->ka_timeout);
> + p_tcp->ka_interval = cpu_to_le32(p_conn->ka_interval);
> + p_tcp->max_rt_time = cpu_to_le32(p_conn->max_rt_time);
> + dval = p_conn->initial_rcv_wnd;
> + p_tcp->initial_rcv_wnd = cpu_to_le32(dval);
> + p_tcp->ttl = p_conn->ttl;
> + p_tcp->tos_or_tc = p_conn->tos_or_tc;
> + p_tcp->remote_port = cpu_to_le16(p_conn->remote_port);
> + p_tcp->local_port = cpu_to_le16(p_conn->local_port);
> + p_tcp->mss = cpu_to_le16(p_conn->mss);
> + p_tcp->snd_wnd_scale = p_conn->snd_wnd_scale;
> + p_tcp->rcv_wnd_scale = p_conn->rcv_wnd_scale;
> + dval = p_conn->ts_ticks_per_second;
> + p_tcp->ts_ticks_per_second = cpu_to_le32(dval);
> + wval = p_conn->da_timeout_value;
> + p_tcp->da_timeout_value = cpu_to_le16(wval);
> + p_tcp->ack_frequency = p_conn->ack_frequency;
> + p_tcp->connect_mode = p_conn->connect_mode;
> + } else {
> + p_tcp2 =
> + &((struct iscsi_spe_conn_offload_option2 *)p_ramrod)->tcp;
> + ucval = p_conn->local_mac[1];
> + ((u8 *)(&p_tcp2->local_mac_addr_hi))[0] = ucval;
> + ucval = p_conn->local_mac[0];
> + ((u8 *)(&p_tcp2->local_mac_addr_hi))[1] = ucval;
> + ucval = p_conn->local_mac[3];
> + ((u8 *)(&p_tcp2->local_mac_addr_mid))[0] = ucval;
> + ucval = p_conn->local_mac[2];
> + ((u8 *)(&p_tcp2->local_mac_addr_mid))[1] = ucval;
> + ucval = p_conn->local_mac[5];
> + ((u8 *)(&p_tcp2->local_mac_addr_lo))[0] = ucval;
> + ucval = p_conn->local_mac[4];
> + ((u8 *)(&p_tcp2->local_mac_addr_lo))[1] = ucval;
> +
> + ucval = p_conn->remote_mac[1];
> + ((u8 *)(&p_tcp2->remote_mac_addr_hi))[0] = ucval;
> + ucval = p_conn->remote_mac[0];
> + ((u8 *)(&p_tcp2->remote_mac_addr_hi))[1] = ucval;
> + ucval = p_conn->remote_mac[3];
> + ((u8 *)(&p_tcp2->remote_mac_addr_mid))[0] = ucval;
> + ucval = p_conn->remote_mac[2];
> + ((u8 *)(&p_tcp2->remote_mac_addr_mid))[1] = ucval;
> + ucval = p_conn->remote_mac[5];
> + ((u8 *)(&p_tcp2->remote_mac_addr_lo))[0] = ucval;
> + ucval = p_conn->remote_mac[4];
> + ((u8 *)(&p_tcp2->remote_mac_addr_lo))[1] = ucval;
> +
> + p_tcp2->vlan_id = cpu_to_le16(p_conn->vlan_id);
> + p_tcp2->flags = p_conn->tcp_flags;
> +
> + p_tcp2->ip_version = p_conn->ip_version;
> + for (i = 0; i < 4; i++) {
> + dval = p_conn->remote_ip[i];
> + p_tcp2->remote_ip[i] = cpu_to_le32(dval);
> + dval = p_conn->local_ip[i];
> + p_tcp2->local_ip[i] = cpu_to_le32(dval);
> + }
> +
> + p_tcp2->flow_label = cpu_to_le32(p_conn->flow_label);
> + p_tcp2->ttl = p_conn->ttl;
> + p_tcp2->tos_or_tc = p_conn->tos_or_tc;
> + p_tcp2->remote_port = cpu_to_le16(p_conn->remote_port);
> + p_tcp2->local_port = cpu_to_le16(p_conn->local_port);
> + p_tcp2->mss = cpu_to_le16(p_conn->mss);
> + p_tcp2->rcv_wnd_scale = p_conn->rcv_wnd_scale;
> + p_tcp2->connect_mode = p_conn->connect_mode;
> + wval = p_conn->syn_ip_payload_length;
> + p_tcp2->syn_ip_payload_length = cpu_to_le16(wval);
> + p_tcp2->syn_phy_addr_lo = DMA_LO_LE(p_conn->syn_phy_addr);
> + p_tcp2->syn_phy_addr_hi = DMA_HI_LE(p_conn->syn_phy_addr);
> + }
Is there any chance you could factor out above blocks into own functions so
you have
if (!GET_FIELD(p_ramrod->iscsi.flags,
ISCSI_CONN_OFFLOAD_PARAMS_TCP_ON_CHIP_1B)) {
qedi_do_stuff_off_chip();
else
qedi_do_stuff_on_chip();
> +
[...]
> +static void __iomem *qed_iscsi_get_db_addr(struct qed_hwfn *p_hwfn, u32 cid)
> +{
> + return (u8 __iomem *)p_hwfn->doorbells +
> + qed_db_addr(cid, DQ_DEMS_LEGACY);
> +}
> +
> +static void __iomem *qed_iscsi_get_primary_bdq_prod(struct qed_hwfn *p_hwfn,
> + u8 bdq_id)
> +{
> + u8 bdq_function_id = ISCSI_BDQ_ID(p_hwfn->port_id);
> +
> + return (u8 __iomem *)p_hwfn->regview + GTT_BAR0_MAP_REG_MSDM_RAM +
> + MSTORM_SCSI_BDQ_EXT_PROD_OFFSET(bdq_function_id,
> + bdq_id);
> +}
> +
> +static void __iomem *qed_iscsi_get_secondary_bdq_prod(struct qed_hwfn
> *p_hwfn,
> + u8 bdq_id)
> +{
> + u8 bdq_function_id = ISCSI_BDQ_ID(p_hwfn->port_id);
> +
> + return (u8 __iomem *)p_hwfn->regview + GTT_BAR0_MAP_REG_TSDM_RAM +
> + TSTORM_SCSI_BDQ_EXT_PROD_OFFSET(bdq_function_id,
> + bdq_id);
> +}
Why are you casting to u8* here, you're returning void*?
[...]
> +
> + if (tasks) {
> + struct qed_tid_mem *tid_info = kzalloc(sizeof(*tid_info),
> + GFP_KERNEL);
> +
> + if (!tid_info) {
> + DP_NOTICE(cdev,
> + "Failed to allocate tasks information\n");
> + qed_iscsi_stop(cdev);
> + return -ENOMEM;
> + }
> +
> + rc = qed_cxt_get_tid_mem_info(QED_LEADING_HWFN(cdev),
> + tid_info);
> + if (rc) {
> + DP_NOTICE(cdev, "Failed to gather task information\n");
> + qed_iscsi_stop(cdev);
> + kfree(tid_info);
> + return rc;
> + }
> +
> + /* Fill task information */
> + tasks->size = tid_info->tid_size;
> + tasks->num_tids_per_block = tid_info->num_tids_per_block;
> + memcpy(tasks->blocks, tid_info->blocks, MAX_TID_BLOCKS);
> +
> + kfree(tid_info);
> + }
> +
> + return 0;
> +}
Maybe:
struct qed_tid_mem *tid_info;
[...]
if (!tasks)
return 0;
tid_info = kzalloc(sizeof(*tid_info), GFP_KERNEL);
if (!tid_info) {
DP_NOTICE(cdev, "Failed to allocate tasks information\n");
qed_iscsi_stop(cdev);
return -ENOMEM;
}
rc = qed_cxt_get_tid_mem_info(QED_LEADING_HWFN(cdev), tid_info);
if (rc) {
DP_NOTICE(cdev, "Failed to gather task information\n");
qed_iscsi_stop(cdev);
kfree(tid_info);
return rc;
}
/* Fill task information */
tasks->size = tid_info->tid_size;
tasks->num_tids_per_block = tid_info->num_tids_per_block;
memcpy(tasks->blocks, tid_info->blocks, MAX_TID_BLOCKS);
kfree(tid_info);
> +
[...]
> +/**
> + * @brief start iscsi in FW
> + *
> + * @param cdev
> + * @param tasks - qed will fill information about tasks
> + *
Please use proper kerneldoc and not doxygen syntax.
Thanks,
Johannes
--
Johannes Thumshirn Storage
jthumsh...@suse.de +49 911 74053 689
SUSE LINUX GmbH, Maxfeldstr. 5, 90409 Nürnberg
GF: Felix Imendörffer, Jane Smithard, Graham Norton
HRB 21284 (AG Nürnberg)
Key fingerprint = EC38 9CAB C2C4 F25D 8600 D0D0 0393 969D 2D76 0850
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
