From: Xiang Chen <chenxian...@hisilicon.com>
Add the function to set PHY min and max linkrate through
sysfs interface.
Signed-off-by: Xiang Chen <chenxian...@hisilicon.com>
Signed-off-by: John Garry <john.ga...@huawei.com>
---
drivers/scsi/hisi_sas/hisi_sas.h | 3 +++
drivers/scsi/hisi_sas/hisi_sas_main.c | 12 +++++++--
drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 45 ++++++++++++++++++++++++++++++++++
drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 45 ++++++++++++++++++++++++++++++++++
4 files changed, 103 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
index 8b5ecc6..c0cd505 100644
--- a/drivers/scsi/hisi_sas/hisi_sas.h
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -168,6 +168,9 @@ struct hisi_sas_hw {
void (*phy_enable)(struct hisi_hba *hisi_hba, int phy_no);
void (*phy_disable)(struct hisi_hba *hisi_hba, int phy_no);
void (*phy_hard_reset)(struct hisi_hba *hisi_hba, int phy_no);
+ void (*phy_set_linkrate)(struct hisi_hba *hisi_hba, int phy_no,
+ struct sas_phy_linkrates *linkrates);
+ enum sas_linkrate (*phy_get_max_linkrate)(void);
void (*free_device)(struct hisi_hba *hisi_hba,
struct hisi_sas_device *dev);
int (*get_wideport_bitmap)(struct hisi_hba *hisi_hba, int port_id);
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c
b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 18e2194..6d6f150 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -369,9 +369,14 @@ static void hisi_sas_bytes_dmaed(struct hisi_hba
*hisi_hba, int phy_no)
struct sas_phy *sphy = sas_phy->phy;
sphy->negotiated_linkrate = sas_phy->linkrate;
- sphy->minimum_linkrate = phy->minimum_linkrate;
sphy->minimum_linkrate_hw = SAS_LINK_RATE_1_5_GBPS;
- sphy->maximum_linkrate = phy->maximum_linkrate;
+ sphy->maximum_linkrate_hw =
+ hisi_hba->hw->phy_get_max_linkrate();
+ if (sphy->minimum_linkrate == SAS_LINK_RATE_UNKNOWN)
+ sphy->minimum_linkrate = phy->minimum_linkrate;
+
+ if (sphy->maximum_linkrate == SAS_LINK_RATE_UNKNOWN)
+ sphy->maximum_linkrate = phy->maximum_linkrate;
}
if (phy->phy_type & PORT_TYPE_SAS) {
@@ -645,6 +650,9 @@ static int hisi_sas_control_phy(struct asd_sas_phy
*sas_phy, enum phy_func func,
break;
case PHY_FUNC_SET_LINK_RATE:
+ hisi_hba->hw->phy_set_linkrate(hisi_hba, phy_no, funcdata);
+ break;
+
case PHY_FUNC_RELEASE_SPINUP_HOLD:
default:
return -EOPNOTSUPP;
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
index 05177fc..8a1be0b 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
@@ -843,6 +843,49 @@ static void sl_notify_v1_hw(struct hisi_hba *hisi_hba, int
phy_no)
hisi_sas_phy_write32(hisi_hba, phy_no, SL_CONTROL, sl_control);
}
+static enum sas_linkrate phy_get_max_linkrate_v1_hw(void)
+{
+ return SAS_LINK_RATE_6_0_GBPS;
+}
+
+static void phy_set_linkrate_v1_hw(struct hisi_hba *hisi_hba, int phy_no,
+ struct sas_phy_linkrates *r)
+{
+ u32 prog_phy_link_rate =
+ hisi_sas_phy_read32(hisi_hba, phy_no, PROG_PHY_LINK_RATE);
+ struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no];
+ struct asd_sas_phy *sas_phy = &phy->sas_phy;
+ int i;
+ enum sas_linkrate min, max;
+ u32 rate_mask = 0;
+
+ if (r->maximum_linkrate == SAS_LINK_RATE_UNKNOWN) {
+ max = sas_phy->phy->maximum_linkrate;
+ min = r->minimum_linkrate;
+ } else if (r->minimum_linkrate == SAS_LINK_RATE_UNKNOWN) {
+ max = r->maximum_linkrate;
+ min = sas_phy->phy->minimum_linkrate;
+ } else
+ return;
+
+ sas_phy->phy->maximum_linkrate = max;
+ sas_phy->phy->minimum_linkrate = min;
+
+ min -= SAS_LINK_RATE_1_5_GBPS;
+ max -= SAS_LINK_RATE_1_5_GBPS;
+
+ for (i = 0; i <= max; i++)
+ rate_mask |= 1 << (i * 2);
+
+ prog_phy_link_rate &= ~0xff;
+ prog_phy_link_rate |= rate_mask;
+
+ hisi_sas_phy_write32(hisi_hba, phy_no, PROG_PHY_LINK_RATE,
+ prog_phy_link_rate);
+
+ phy_hard_reset_v1_hw(hisi_hba, phy_no);
+}
+
static int get_wideport_bitmap_v1_hw(struct hisi_hba *hisi_hba, int port_id)
{
int i, bitmap = 0;
@@ -1818,6 +1861,8 @@ static int hisi_sas_v1_init(struct hisi_hba *hisi_hba)
.phy_enable = enable_phy_v1_hw,
.phy_disable = disable_phy_v1_hw,
.phy_hard_reset = phy_hard_reset_v1_hw,
+ .phy_set_linkrate = phy_set_linkrate_v1_hw,
+ .phy_get_max_linkrate = phy_get_max_linkrate_v1_hw,
.get_wideport_bitmap = get_wideport_bitmap_v1_hw,
.max_command_entries = HISI_SAS_COMMAND_ENTRIES_V1_HW,
.complete_hdr_size = sizeof(struct hisi_sas_complete_v1_hdr),
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
index e88113a..15487f2 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
@@ -1060,6 +1060,49 @@ static void sl_notify_v2_hw(struct hisi_hba *hisi_hba,
int phy_no)
hisi_sas_phy_write32(hisi_hba, phy_no, SL_CONTROL, sl_control);
}
+static enum sas_linkrate phy_get_max_linkrate_v2_hw(void)
+{
+ return SAS_LINK_RATE_12_0_GBPS;
+}
+
+static void phy_set_linkrate_v2_hw(struct hisi_hba *hisi_hba, int phy_no,
+ struct sas_phy_linkrates *r)
+{
+ u32 prog_phy_link_rate =
+ hisi_sas_phy_read32(hisi_hba, phy_no, PROG_PHY_LINK_RATE);
+ struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no];
+ struct asd_sas_phy *sas_phy = &phy->sas_phy;
+ int i;
+ enum sas_linkrate min, max;
+ u32 rate_mask = 0;
+
+ if (r->maximum_linkrate == SAS_LINK_RATE_UNKNOWN) {
+ max = sas_phy->phy->maximum_linkrate;
+ min = r->minimum_linkrate;
+ } else if (r->minimum_linkrate == SAS_LINK_RATE_UNKNOWN) {
+ max = r->maximum_linkrate;
+ min = sas_phy->phy->minimum_linkrate;
+ } else
+ return;
+
+ sas_phy->phy->maximum_linkrate = max;
+ sas_phy->phy->minimum_linkrate = min;
+
+ min -= SAS_LINK_RATE_1_5_GBPS;
+ max -= SAS_LINK_RATE_1_5_GBPS;
+
+ for (i = 0; i <= max; i++)
+ rate_mask |= 1 << (i * 2);
+
+ prog_phy_link_rate &= ~0xff;
+ prog_phy_link_rate |= rate_mask;
+
+ hisi_sas_phy_write32(hisi_hba, phy_no, PROG_PHY_LINK_RATE,
+ prog_phy_link_rate);
+
+ phy_hard_reset_v2_hw(hisi_hba, phy_no);
+}
+
static int get_wideport_bitmap_v2_hw(struct hisi_hba *hisi_hba, int port_id)
{
int i, bitmap = 0;
@@ -2739,6 +2782,8 @@ static int hisi_sas_v2_init(struct hisi_hba *hisi_hba)
.phy_enable = enable_phy_v2_hw,
.phy_disable = disable_phy_v2_hw,
.phy_hard_reset = phy_hard_reset_v2_hw,
+ .phy_set_linkrate = phy_set_linkrate_v2_hw,
+ .phy_get_max_linkrate = phy_get_max_linkrate_v2_hw,
.max_command_entries = HISI_SAS_COMMAND_ENTRIES_V2_HW,
.complete_hdr_size = sizeof(struct hisi_sas_complete_v2_hdr),
};
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
