On 29/11/2016 10:47, Dan Carpenter wrote:
There are some typos where we intended "<<" but have "<". Seems likely
to cause a bunch of problems.
Fixes: d3b688d3c69d ("scsi: hisi_sas: add v2 hw support for ECC and AXI bus fatal
error")
Signed-off-by: Dan Carpenter <dan.carpen...@oracle.com>
---
There is another static checker warning to fix perhaps:
drivers/scsi/hisi_sas/hisi_sas_v2_hw.c:2015 phy_up_v2_hw()
warn: was expecting a 64 bit value instead of '(2 | 1)'
The code is doing:
phy->phy_type &= ~(PORT_TYPE_SAS | PORT_TYPE_SATA);
Right, I think that a u32 would suffice. We can generate a separate
patch for this.
phy->phy_type is a u64 and PORT_TYPE_SAS is "1U << 1". So this code
is clearing out the high 32 bits of ->phy_type uninitentionally. It's
simple enough to make it 1ULL << 1 but the question is, do we really
need ->phy_type to be a 64 bit variable? I'm pretty sure that a u32
will suffice.
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
index 15487f2..93876c0 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
@@ -64,19 +64,19 @@
HGC_LM_DFX_STATUS2_ITCTLIST_OFF)
#define HGC_CQE_ECC_ADDR 0x13c
#define HGC_CQE_ECC_1B_ADDR_OFF 0
-#define HGC_CQE_ECC_1B_ADDR_MSK (0x3f < HGC_CQE_ECC_1B_ADDR_OFF)
+#define HGC_CQE_ECC_1B_ADDR_MSK (0x3f << HGC_CQE_ECC_1B_ADDR_OFF)
#define HGC_CQE_ECC_MB_ADDR_OFF 8
-#define HGC_CQE_ECC_MB_ADDR_MSK (0x3f < HGC_CQE_ECC_MB_ADDR_OFF)
+#define HGC_CQE_ECC_MB_ADDR_MSK (0x3f << HGC_CQE_ECC_MB_ADDR_OFF)
#define HGC_IOST_ECC_ADDR 0x140
#define HGC_IOST_ECC_1B_ADDR_OFF 0
-#define HGC_IOST_ECC_1B_ADDR_MSK (0x3ff < HGC_IOST_ECC_1B_ADDR_OFF)
+#define HGC_IOST_ECC_1B_ADDR_MSK (0x3ff << HGC_IOST_ECC_1B_ADDR_OFF)
#define HGC_IOST_ECC_MB_ADDR_OFF 16
-#define HGC_IOST_ECC_MB_ADDR_MSK (0x3ff < HGC_IOST_ECC_MB_ADDR_OFF)
+#define HGC_IOST_ECC_MB_ADDR_MSK (0x3ff << HGC_IOST_ECC_MB_ADDR_OFF)
#define HGC_DQE_ECC_ADDR 0x144
#define HGC_DQE_ECC_1B_ADDR_OFF 0
-#define HGC_DQE_ECC_1B_ADDR_MSK (0xfff < HGC_DQE_ECC_1B_ADDR_OFF)
+#define HGC_DQE_ECC_1B_ADDR_MSK (0xfff << HGC_DQE_ECC_1B_ADDR_OFF)
#define HGC_DQE_ECC_MB_ADDR_OFF 16
-#define HGC_DQE_ECC_MB_ADDR_MSK (0xfff < HGC_DQE_ECC_MB_ADDR_OFF)
+#define HGC_DQE_ECC_MB_ADDR_MSK (0xfff << HGC_DQE_ECC_MB_ADDR_OFF)
#define HGC_INVLD_DQE_INFO 0x148
#define HGC_INVLD_DQE_INFO_FB_CH0_OFF 9
#define HGC_INVLD_DQE_INFO_FB_CH0_MSK (0x1 << HGC_INVLD_DQE_INFO_FB_CH0_OFF)
.
Cheers
These were introduced in recent patch applied to 4.10 queue, and would
only affect rare occurance of AXI/ECC error.
Signed-off-by: John Garry <john.ga...@huawei.com>
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
