Bart, On 2/21/17 13:21, Bart Van Assche wrote: > On 02/20/2017 06:35 PM, Martin K. Petersen wrote: >> I'm still not keen on having two orthogonal sanity checks wrt. figuring >> out how much of a request has been completed. >> >> Also, I find your approach hard to follow in the case where >> sd_completed_bytes() is called after the resid has been adjusted. It >> works, but it's not immediately obvious that that's the case. Which to >> me is an indication that this entire thing needs a thorough cleanup. > > Hello Martin and Damien, > > How about the following: > * Add a function to the block layer that reports whether or not the > request is a medium access request. The number of transferred bytes > for a medium access request is a multiple of the logical block size. > (The terminology "medium access command" comes from the SCSI specs.) > * Use that function instead of "scmd->request->cmd_type == REQ_TYPE_FS" > in the mpt3sas driver. > * Do not modify sd_done(). > > This approach has the advantage that the mpt3sas firmware bug workaround > does not slow down the hot path of the sd driver when another LLD than > mpt3sas is used.
I think we would still need the check for REQ_TYPE_FS to avoid interfering with SG_IO commands. As for the "medium access command" test, I am not sure if the block layer is the right place to define that since a request operation may map to different commands depending on the device type (e.g. REQ_OP_DISCARD which can become unmap or write same in SCSI). Martin, Which approach do you prefer ? Keeping everything contained to mpt3sas (so basically just fixing the problematic patch), or cleaning up everything with sd_completed_bytes rewrite ? Best regards. -- Damien Le Moal, Ph.D. Sr. Manager, System Software Research Group, Western Digital Corporation damien.lem...@wdc.com (+81) 0466-98-3593 (ext. 513593) 1 kirihara-cho, Fujisawa, Kanagawa, 252-0888 Japan www.wdc.com, www.hgst.com