On Tue, Mar 7, 2017 at 3:58 AM, Jack Wang <xjtu...@gmail.com> wrote: > 2017-03-07 1:54 GMT+01:00 V <viswesh.vi...@gmail.com>: >> Hi, >> >> I am reaching out regarding a SCSI error handler issue, which we see >> in our lab systems. >> >> Environment: Ubuntu 4.4.0-31-generic >> >> Issue: Write IOs are getting stuck in our system randomly. All drives >> seen with the issue are all SATA drives. >> Root cause: SCSI error handler is not woken up (or) it is up, but not >> able to flush commands and hence the IOs get stuck. (as the requests >> are not flushed out and host is not restarted) >> >> We have 6 instances seen till now. >> >> This is what we see. >> 1) As part of testing our drives, we start lot of read/writes, along >> with some user space utilities running to check the drive health. >> 1) In our recent testing, we see lot of commands going through the >> "abort scheduled" path. And we see that in between, for one of the >> commands, the error handler is not woken up, and majority of >> processes, which were writing, gets stalled. >> 2) We are still trying to figure out what is causing this much number >> of abort? Is it usual? Are there some other debugs, which I could >> enable to get more information? We know these are user space commands >> which are being aborted, but not sure which exact command it is for >> now. >> 3) I see the "abort scheduled" messages in almost all drives in all >> systems, hence i dont believe it is a drive issue. >> 4) I checked the host_failed and host_busy variables, both are set to >> 1 in system 1. 2nd one is still alive, havent taken a crash dump yet. >> 5) All drives seen with the issue are SATA drives. >> 6) I have attached udevadm info of a drive which failed in system 2. >> >> Thanks in advance, >> Viswesh >> >> >> Logs >> ------- >> System 1 >> >> [371546.605736] sd 9:0:0:0: scsi_block_when_processing_errors: rtn: 1 >> [371546.606727] sd 9:0:0:0: scsi_block_when_processing_errors: rtn: 1 >> [371546.607721] sd 9:0:0:0: scsi_block_when_processing_errors: rtn: 1 >> [371546.618113] sd 9:0:0:0: [sg19] tag#20 abort scheduled >> [371546.624039] sd 9:0:0:0: [sg19] tag#20 aborting command >> [371546.624045] sd 9:0:0:0: [sg19] tag#20 cmd abort failed >> [371546.624051] scsi host9: Waking error handler thread >> [371546.624060] scsi host9: scsi_eh_9: waking up 0/1/1 >> [371546.624081] sd 9:0:0:0: [sg19] tag#20 scsi_eh_9: flush finish cmd >> [371546.624095] scsi host9: waking up host to restart >> [371546.624098] scsi host9: scsi_eh_9: sleeping >> >> >> [371546.635314] sd 8:0:0:0: [sg17] tag#13 abort scheduled >> [371546.640031] sd 8:0:0:0: [sg17] tag#13 aborting command >> [371546.640037] sd 8:0:0:0: [sg17] tag#13 cmd abort failed >> [371546.640043] scsi host8: Waking error handler thread >> [371546.640078] scsi host8: scsi_eh_8: waking up 0/1/1 >> [371546.640098] sd 8:0:0:0: [sg17] tag#13 scsi_eh_8: flush finish cmd >> [371546.640113] scsi host8: waking up host to restart >> [371546.640117] scsi host8: scsi_eh_8: sleeping >> >> [371546.657269] sd 6:0:0:0: [sg12] tag#1 abort scheduled >> [371546.664034] sd 6:0:0:0: [sg12] tag#1 aborting command >> [371546.664040] sd 6:0:0:0: [sg12] tag#1 cmd abort failed >> >> Here we can see that, error handler is not woken up. And the entire >> IO subsystem goes for a toss. >> >> [371777.594510] INFO: task md2_raid1:508 blocked for more than 120 seconds. >> [371777.594571] Not tainted 4.4.0-31-generic #50~14.04.1-Ubuntu >> [371777.594613] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" >> disables this message. >> [371777.594665] md2_raid1 D ffff883fed2afc78 0 508 2 0x00000000 >> [371777.594673] ffff883fed2afc78 ffff881fef0e8000 ffff883fed21c4c0 >> ffff883fed2b0000 >> [371777.594678] ffff883ff236e298 ffff883ff236e000 ffff883ff236e018 >> ffff883ff236e018 >> >> By enabling more scsi logs(in a different system), including LL, we >> get some more info ( I have enabled the full scsi levels for all >> categories and it is still running) >> >> >> System 2 >> >> [405197.171574] sd 5:0:0:0: [sg3] sg_write: count=3D88 >> [405197.171577] sd 5:0:0:0: scsi_block_when_processing_errors: rtn: 1 >> [405197.171581] sd 5:0:0:0: [sg3] sg_common_write: scsi >> opcode=3D0x85, cmd_size=3D16 >> [405197.171583] sd 5:0:0:0: [sg3] sg_start_req: dxfer_len=3D512 >> [405197.171605] sd 5:0:0:0: [sg3] sg_link_reserve: size=3D512 >> [405197.171623] sd 5:0:0:0: [sg3] sg_poll: res=3D0x104 >> [405197.172648] sd 5:0:0:0: [sg3] sg_cmd_done: pack_id=3D0, res=3D0x0 >> [405197.172701] sd 5:0:0:0: [sg3] sg_poll: res=3D0x145 >> [405197.172710] sd 5:0:0:0: [sg3] sg_read: count=3D88 >> [405197.172716] sd 5:0:0:0: [sg3] sg_finish_rem_req: res_used=3D1 >> [405197.172721] sd 5:0:0:0: [sg3] sg_unlink_reserve: req->k_use_sg=3D1 >> [405197.172756] sd 5:0:0:0: [sg3] sg_write: count=3D88 >> [405197.172760] sd 5:0:0:0: scsi_block_when_processing_errors: rtn: 1 >> [405197.172764] sd 5:0:0:0: [sg3] sg_common_write: scsi >> opcode=3D0x85, cmd_size=3D16 >> [405197.172767] sd 5:0:0:0: [sg3] sg_start_req: dxfer_len=3D512 >> [405197.172774] sd 5:0:0:0: [sg3] sg_link_reserve: size=3D512 >> [405197.172793] sd 5:0:0:0: [sg3] sg_poll: res=3D0x104 >> [405197.173806] sd 5:0:0:0: [sg3] sg_cmd_done: pack_id=3D0, res=3D0x0 >> [405197.173829] sd 5:0:0:0: [sg3] sg_poll: res=3D0x145 >> [405197.173836] sd 5:0:0:0: [sg3] sg_read: count=3D88 >> [405197.173839] sd 5:0:0:0: [sg3] sg_finish_rem_req: res_used=3D1 >> [405197.173843] sd 5:0:0:0: [sg3] sg_unlink_reserve: req->k_use_sg=3D1 >> [405197.173893] sd 5:0:0:0: [sg3] sg_write: count=3D88 >> [405197.173896] sd 5:0:0:0: scsi_block_when_processing_errors: rtn: 1 >> [405197.173900] sd 5:0:0:0: [sg3] sg_common_write: scsi >> opcode=3D0x85, cmd_size=3D16 >> [405197.173903] sd 5:0:0:0: [sg3] sg_start_req: dxfer_len=3D0 >> [405197.173921] sd 5:0:0:0: [sg3] sg_poll: res=3D0x104 >> >> [405197.174082] sd 5:0:0:0: [sg3] tag#5 abort scheduled >> [405197.179372] sd 5:0:0:0: [sg3] tag#5 aborting command >> [405197.179378] sd 5:0:0:0: [sg3] tag#5 cmd abort failed >> >> [405257.225584] sd 5:0:0:0: [sg3] sg_poll: res=3D0x104 >> [405257.225599] sd 5:0:0:0: [sg3] sg_release >> [405257.225617] sd 5:0:0:0: [sg3] sg_open: flags=3D0x8002 >> >> Error handler thread is not waken up here (or) i dont see flush >> command trace (even if it is already woken up) >> >> [405349.082863] INFO: task md2_raid1:484 blocked for more than 120 seconds >> [405349.082922] Not tainted 4.4.0-31-generic #50~14.04.1-Ubuntu >> [405349.082964] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" >> disables this message. >> [405349.083016] md2_raid1 D ffff881feca2bc78 0 484 2 0x00000000 > > Can you reproduce without md raid1? I suppose it shouldn't related.
I believe so. It is not related. > You mentioned it's only with SATA, are they all the same HDDs or from > different vendors? > It is 2 different vendors (Sandisk and HGST), but now under the same umbrella though. Are there anything quite evident from the logs. i could collect some proc entries, if you would need. > Regards, > Jack