Ondrej, would you please test this new series?
Changed since v1:
- PDMA transfer residual is calculated earlier.
- End of DMA flag check is now polled (if there is any residual).
Changed since v2:
- Bail out of transfer loops when Gated IRQ gets asserted.
- Make udelay conditional on board type.
- Drop sg_tablesize patch due to performance regression.
Changed since v3:
- Add Ondrej's workaround for corrupt WRITE commands on DTC boards.
- Reset the 53c400 logic after any short PDMA transfer.
- Don't fail the transfer if the 53c400 logic got a reset.
Changed since v4:
- Bail out of transfer loops when Gated IRQ gets asserted. (Again.)
- Always call wait_for_53c80_registers() at end of transfer.
- Drain chip buffers after PDMA receive is interrupted.
- Rework residual calculation.
- Add new patch to correct DMA terminology.
Finn Thain (2):
g_NCR5380: Cleanup comments and whitespace
g_NCR5380: Use unambiguous terminology for PDMA send and receive
Ondrej Zary (4):
g_NCR5380: Fix PDMA transfer size
g_NCR5380: End PDMA transfer correctly on target disconnection
g_NCR5380: Limit PDMA send to 512 B to avoid data corruption on
DTC3181E
g_NCR5380: Re-work PDMA loops
drivers/scsi/g_NCR5380.c | 260 +++++++++++++++++++++++++----------------------
1 file changed, 139 insertions(+), 121 deletions(-)
--
2.13.0
