On 08/04/2017 06:36 PM, Hannes Reinecke wrote: > On 08/04/2017 06:26 PM, Meelis Roos wrote: >>> Older Controller might not support volume status, so disable >>> it if 'hpsa_allow_any' is present. >> >> It makes my DL380G4 boot with hpsa.hpsa_allow_any=1 and it seems to >> work. Howevere, there are multiole verbose dmesg entries about failing >> things: >> > Hehe. How cool is that? > >> 0.267224] HP HPSA Driver (v 3.4.18-0) >> [ 0.267351] hpsa 0000:04:03.0: unsupported board ID: 0x40910e11 >> [ 0.267494] hpsa 0000:04:03.0: unsupported board ID: 0x40910e11 >> [ 0.267695] hpsa 0000:04:03.0: PCI IRQ 51 -> rerouted to legacy IRQ 19 >> [ 0.267889] hpsa 0000:04:03.0: Physical aborts not supported >> [ 0.268036] hpsa 0000:04:03.0: Logical aborts not supported >> [ 0.268163] hpsa 0000:04:03.0: HP SSD Smart Path aborts not supported >> [ 0.448240] scsi host0: hpsa >> [ 0.452228] hpsa 0000:04:03.0: report luns requested format 2, got 0 >> [ 0.453950] hpsa 0000:04:03.0: hpsa0: hpsa_update_device_info: can't get >> device id for host 0:C0:T0:L0 Direct-Access MAN3735MC >> [ 0.454312] hpsa 0000:04:03.0: SCSI status: LUN:0000000000000000 >> CDB:26000000000015000801000000000000 >> [ 0.454525] hpsa 0000:04:03.0: SCSI Status = 02, Sense key = 0x05, ASC = >> 0x3a, ASCQ = 0x00 > Curious. CDB 26 is a vendor specific command, and the controller > responds with 'Medium not present'. > Will be checking what's happening here. > >> Among these, the following show up red in dmesg: >> >> report luns requested format 2, got 0 >> hpsa0: hpsa_update_device_info: can't get device id for host 0:C0:T0:L0 >> Direct-Access MAN3735MC >> hpsa0: hpsa_update_device_info: can't get device id for host 0:C0:T-1:L-1 >> Direct-Access MAP3735NC >> report luns requested format 2, got 0 >> > Hmm. Looking into it. > > But thanks for testing! > You should be able to suppress the "can't get device id' messages with:
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c index 2cf6cccf067f..56fd654c1ecd 100644 --- a/drivers/scsi/hpsa.c +++ b/drivers/scsi/hpsa.c @@ -3813,7 +3813,7 @@ static int hpsa_update_device_info(struct ctlr_info *h, memset(this_device->device_id, 0, sizeof(this_device->device_id)); if (hpsa_get_device_id(h, scsi3addr, this_device->device_id, 8, - sizeof(this_device->device_id))) + sizeof(this_device->device_id)) < 0) dev_err(&h->pdev->dev, "hpsa%d: %s: can't get device id for host %d:C0:T%d:L%d\t%s\t%.16s\n", h->ctlr, __func__, Cheers, Hannes -- Dr. Hannes Reinecke Teamlead Storage & Networking h...@suse.de +49 911 74053 688 SUSE LINUX GmbH, Maxfeldstr. 5, 90409 Nürnberg GF: F. Imendörffer, J. Smithard, J. Guild, D. Upmanyu, G. Norton HRB 21284 (AG Nürnberg)