On Wed, 2017-09-27 at 21:35 -0400, Martin K. Petersen wrote:
> SBC-4 states:
>
> "A MAXIMUM UNMAP LBA COUNT field set to a non-zero value indicates
> the
> maximum number of LBAs that may be unmapped by an UNMAP command"
>
> "A MAXIMUM WRITE SAME LENGTH field set to a non-zero value
> indicates
> the maximum number of contiguous logical blocks that the device
> server
> allows to be unmapped or written in a single WRITE SAME command."
>
> Despite the spec being clear on the topic, some devices incorrectly
> expect WRITE SAME commands with the UNMAP bit set to be limited to
> the
> value reported in MAXIMUM UNMAP LBA COUNT in the Block Limits VPD.
>
> Implement a blacklist option that can be used to accommodate devices
> with this behavior.
>
> Reported-by: Bill Kuzeja <[email protected]>
> Reported-by: Ewan D. Milne <[email protected]>
> Signed-off-by: Martin K. Petersen <[email protected]>
> ---
> drivers/scsi/scsi_scan.c | 3 +++
> drivers/scsi/sd.c | 16 ++++++++++++----
> include/scsi/scsi_device.h | 1 +
> include/scsi/scsi_devinfo.h | 1 +
> 4 files changed, 17 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
> index e7818afeda2b..15590a063ad9 100644
> --- a/drivers/scsi/scsi_scan.c
> +++ b/drivers/scsi/scsi_scan.c
> @@ -956,6 +956,9 @@ static int scsi_add_lun(struct scsi_device *sdev,
> unsigned char *inq_result,
> if (*bflags & BLIST_NO_DIF)
> sdev->no_dif = 1;
>
> + if (*bflags & BLIST_UNMAP_LIMIT_WS)
> + sdev->unmap_limit_for_ws = 1;
> +
> sdev->eh_timeout = SCSI_DEFAULT_EH_TIMEOUT;
>
> if (*bflags & BLIST_TRY_VPD_PAGES)
> diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
> index b18ba3235900..347be7580181 100644
> --- a/drivers/scsi/sd.c
> +++ b/drivers/scsi/sd.c
> @@ -715,13 +715,21 @@ static void sd_config_discard(struct scsi_disk
> *sdkp, unsigned int mode)
> break;
>
> case SD_LBP_WS16:
> - max_blocks = min_not_zero(sdkp->max_ws_blocks,
> - (u32)SD_MAX_WS16_BLOCKS);
> + if (sdkp->device->unmap_limit_for_ws)
> + max_blocks = sdkp->max_unmap_blocks;
> + else
> + max_blocks = sdkp->max_ws_blocks;
> +
> + max_blocks = min_not_zero(max_blocks,
> (u32)SD_MAX_WS16_BLOCKS);
> break;
>
> case SD_LBP_WS10:
> - max_blocks = min_not_zero(sdkp->max_ws_blocks,
> - (u32)SD_MAX_WS10_BLOCKS);
> + if (sdkp->device->unmap_limit_for_ws)
> + max_blocks = sdkp->max_unmap_blocks;
> + else
> + max_blocks = sdkp->max_ws_blocks;
> +
> + max_blocks = min_not_zero(max_blocks,
> (u32)SD_MAX_WS10_BLOCKS);
> break;
>
> case SD_LBP_ZERO:
> diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h
> index 82e93ee94708..67c5a9f223f7 100644
> --- a/include/scsi/scsi_device.h
> +++ b/include/scsi/scsi_device.h
> @@ -192,6 +192,7 @@ struct scsi_device {
> unsigned no_dif:1; /* T10 PI (DIF) should be disabled
> */
> unsigned broken_fua:1; /* Don't set FUA bit
> */
> unsigned lun_in_cdb:1; /* Store LUN bits in
> CDB[1] */
> + unsigned unmap_limit_for_ws:1; /* Use the UNMAP limit
> for WRITE SAME */
>
> atomic_t disk_events_disable_depth; /* disable depth for
> disk events */
>
> diff --git a/include/scsi/scsi_devinfo.h
> b/include/scsi/scsi_devinfo.h
> index 9592570e092a..36b03013d629 100644
> --- a/include/scsi/scsi_devinfo.h
> +++ b/include/scsi/scsi_devinfo.h
> @@ -29,5 +29,6 @@
> #define BLIST_TRY_VPD_PAGES 0x10000000 /* Attempt to read VPD
> pages */
> #define BLIST_NO_RSOC 0x20000000 /* don't try to
> issue RSOC */
> #define BLIST_MAX_1024 0x40000000 /* maximum 1024
> sector cdb length */
> +#define BLIST_UNMAP_LIMIT_WS 0x80000000 /* Use UNMAP limit
> for WRITE SAME */
>
> #endif
Hello Martin
I am testing this but its not being picked up so I want to know if I
have the kernel command line wrong here.
scsi_dev_flags=LIO-ORG:thin2:0x80000000
Device is here
[ 16.853083] scsi 4:0:0:50: Direct-Access LIO-
ORG thin2 4.0 PQ: 0 ANSI: 5
Have a couple of printk's in now to see if I see the flags and they
dont trigger
case SD_LBP_WS16:
if (sdkp->device->unmap_limit_for_ws) {
max_blocks = sdkp->max_unmap_blocks;
printk("RHDEBUG: unmap_limit_for_ws set by
kernel flag for case SD_LBP_WS16\n");
}
else
max_blocks = sdkp->max_ws_blocks;
max_blocks = min_not_zero(max_blocks,
(u32)SD_MAX_WS16_BLOCKS);
break;
case SD_LBP_WS10:
if (sdkp->device->unmap_limit_for_ws) {
max_blocks = sdkp->max_unmap_blocks;
printk("RHDEBUG: unmap_limit_for_ws set by
kernel flag for case SD_LBP_WS10\n");
}
else
max_blocks = sdkp->max_ws_blocks;
max_blocks = min_not_zero(max_blocks,
(u32)SD_MAX_WS10_BLOCKS);
break;
What am I doing wrong to pass the BLIST flags.
Thanks
Laurence
